| Electro-mechanical vibration analysis of functionally graded piezoelectric porous plates in the translation state |
32 |
| Effect of different wall injection schemes on the flow-field of hydrogen fuelled strut-based scramjet combustor |
27 |
| A technical comparison of three low earth orbit satellite constellation systems to provide global broadband |
26 |
| On snap-buckling of porous FG curved nanobeams |
24 |
| The effect of coolant injection from the tip of spike on aerodynamic heating of nose cone at supersonic flow |
23 |
| Mixing enhancement strategies and their mechanisms in supersonic flows: A brief review |
22 |
| Laplace l(1) Huber based cubature Kalman filter for attitude estimation of small satellite |
18 |
| On guided wave propagation in fully clamped porous functionally graded nanoplates |
18 |
| Three-dimensional modeling of rotating detonation in a ramjet engine |
17 |
| The technological and commercial expansion of electric propulsion |
17 |
| Coordinated trajectory planning of dual-arm space robot using constrained particle swarm optimization |
17 |
| Flame propagation in weightlessness above the burning surface of material |
16 |
| The influence of coolant jet direction on heat reduction on the nose cone with Aerodome at supersonic flow |
16 |
| Vibration analysis of functionally graded porous shear deformable tubes excited by moving distributed loads |
15 |
| Design and performance evaluation of a piezoelectric aeroelastic energy harvester based on the limit cycle oscillation phenomenon |
14 |
| Experimental investigations on ethylene-air Continuous Rotating Detonation wave in the hollow chamber with Laval nozzle |
14 |
| Design exploration of combinational spike and opposing jet concept in hypersonic flows based on CFD calculation and surrogate model |
13 |
| An overview of waverider design concept in airframe/inlet integration methodology for air-breathing hypersonic vehicles |
13 |
| Fixed-time attitude tracking control for spacecraft without unwinding |
13 |
| Numerical investigation of drag and heat flux reduction mechanism of the pulsed counterflowing jet on a blunt body in supersonic flows |
13 |
| CubeSat constellations for disaster management in remote areas |
12 |
| Onset of detonation in hydrogen-air mixtures due to shock wave reflection inside a combustion chamber |
12 |
| Design optimization of dual-axis driving mechanism for satellite antenna with two planar revolute clearance joints |
12 |
| The Breakthrough Starshot system model |
12 |
| Autonomous assembly with collision avoidance of a fleet of flexible spacecraft based on disturbance observer |
11 |
| A review on enhanced mixing methods in supersonic mixing layer flows |
11 |
| Numerical experiment on the flow field properties of a blunted body with a counterflowing jet in supersonic flows |
11 |
| Investigation of drag and heat reduction induced by a novel combinational lateral jet and spike concept in supersonic flows based on conjugate heat transfer approach |
11 |
| Contact dynamics and control of a space robot capturing a tumbling object |
11 |
| Numerical investigations of hybrid rocket engines |
11 |
| Influence of the secondary flow control on the transverse gaseous injection flow field properties in a supersonic flow |
11 |
| Mechanical properties of energy-absorbing structures with triply periodic minimal surface topology |
10 |
| Experimental investigation of supersonic combustion in a strut-cavity based combustor |
10 |
| Carbon fiber reinforced hierarchical orthogrid stiffened cylinder: Fabrication and testing |
10 |
| Non-sphere perturbation on dynamic behaviors of spatial flexible damping It beam |
10 |
| Solar 3D printing of lunar regolith |
10 |
| Hayabusa2-Ryugu proximity operation planning and landing site selection |
10 |
| System analysis and test-bed for an atmosphere-breathing electric propulsion system using an inductive plasma thruster |
9 |
| Performance improvement of the mu 10 microwave discharge ion thruster by expansion of the plasma production volume |
9 |
| Numerical investigation of a rotating detonation engine under premixed/non-premixed conditions |
9 |
| Guaranteeing prescribed performance for air-breathing hypersonic vehicles via an adaptive non-affine tracking controller |
9 |
| Design and high speed aerodynamic performance analysis of vortex lift waverider with a wide-speed range |
9 |
| A novel approach for design and analysis of volume-improved osculating-cone waveriders |
9 |
| Adaptive fault-tolerant control for a VTVL reusable launch vehicle |
9 |
| Review on pressure swirl injector in liquid rocket engine |
9 |
| Geomagnetic field models for satellite angular motion studies |
8 |
| Penetration mode effect on thermal protection system by opposing jet |
8 |
| Empirical Orthogonal Function analysis and modeling of ionospheric TEC over South Korean region |
8 |
| Performance evaluation of regenerative cooling/film cooling for hydrocarbon fueled scramjet engine |
8 |
| Effective motion planning strategy for space robot capturing targets under consideration of the berth position |
8 |
