| Twinning-induced plasticity (TWIP) steels |
143 |
| Phase stability and mechanical properties of novel high entropy transition metal carbides |
68 |
| Fluid and particle dynamics in laser powder bed fusion |
68 |
| Current progress and future challenges in rare-earth-free permanent magnets |
62 |
| Promoting the columnar to equiaxed transition and grain refinement of titanium alloys during additive manufacturing |
60 |
| Unveiling the formation of basal texture variations based on twinning and dynamic recrystallization in AZ31 magnesium alloy during extrusion |
54 |
| Transient dynamics of powder spattering in laser powder bed fusion additive manufacturing process revealed by in-situ high-speed high-energy x-ray imaging |
53 |
| Development of low-alloyed and rare-earth-free magnesium alloys having ultra-high strength |
50 |
| Overview on micro- and nanomechanical testing: New insights in interface plasticity and fracture at small length scales |
49 |
| Enhancement of strength-ductility trade-off in a high-entropy alloy through a heterogeneous structure |
47 |
| Interstitial equiatomic CoCrFeMnNi high-entropy alloys: carbon content, microstructure, and compositional homogeneity effects on deformation behavior |
46 |
| Bulk tracer diffusion in CoCrFeNi and CoCrFeMnNi high entropy alloys |
46 |
| Hot cracking mechanism affecting a non-weldable Ni-based superalloy produced by selective electron Beam Melting |
45 |
| Enumeration of the hydrogen-enhanced localized plasticity mechanism for hydrogen embrittlement in structural materials |
45 |
| Machine learning assisted design of high entropy alloys with desired property |
44 |
| Lattice distortion in a strong and ductile refractory high-entropy alloy |
44 |
| Hierarchical microstructure design to tune the mechanical behavior of an interstitial TRIP-TWIP high-entropy alloy |
42 |
| Adiabatic shear instability is not necessary for adhesion in cold spray |
42 |
| First-principles study, fabrication and characterization of (Zr0.25Nb0.25Ti0.25V0.25)C high-entropy ceramics |
41 |
| Strengthening mechanisms acting in extruded Mg-based long-period stacking ordered (LPSO)-phase alloys |
41 |
| Selective laser melting of a high strength Al-Mn-Sc alloy: Alloy design and strengthening mechanisms |
40 |
| Composition design of high entropy alloys using the valence electron concentration to balance strength and ductility |
39 |
| Ultrahigh-strength titanium gyroid scaffolds manufactured by selective laser melting (SLM) for bone implant applications |
39 |
| The influence of Laves phases on the room temperature tensile properties of Inconel 718 fabricated by powder feeding laser additive manufacturing |
39 |
| The effect of powder oxidation on defect formation in laser additive manufacturing |
37 |
| Outstanding tensile properties of a precipitation-strengthened FeCoNiCrTi0.2 high-entropy alloy at room and cryogenic temperatures |
36 |
| Compressive and fatigue behavior of functionally graded Ti-6Al-4V meshes fabricated by electron beam melting |
36 |
| Phase stability and kinetics of a sigma-phase precipitation in CrMnFeCoNi high-entropy alloys |
35 |
| Segregation assisted grain boundary precipitation in a model Al-Zn-Mg-Cu alloy |
34 |
| Effect of heat treatment on the microstructural evolution of a nickel-based superalloy additive-manufactured by laser powder bed fusion |
33 |
| Microstructural optimization through heat treatment for enhancing the fracture toughness and fatigue crack growth resistance of selective laser melted Ti-6Al-4V alloy |
32 |
| Effect of microstructure on early oxidation of MCrAlY coatings |
32 |
| The predominant role of strain-induced vacancies in hydrogen embrittlement of steels: Overview |
32 |
| Microstructure and mechanical properties of Al-Mg-Zr alloys processed by selective laser melting |
32 |
| On the role of twinning and stacking faults on the crystal plasticity and grain refinement in magnesium alloys |
31 |
| Study of a bcc multi-principal element alloy: Tensile and simple shear properties and underlying deformation mechanisms |
31 |
| Deformation mechanisms in a metastable beta titanium twinning induced plasticity alloy with high yield strength and high strain hardening rate |
31 |
| Design and synthesis of a magnesium alloy for room temperature hydrogen storage |
31 |
| In-situ SEM observation of phase transformation and twinning mechanisms in an interstitial high-entropy alloy |
31 |
| Transformation induced softening and plasticity in high entropy alloys |
31 |
| Machine-learning phase prediction of high-entropy alloys |
30 |
| Passivation of a corrosion resistant high entropy alloy in non-oxidizing sulfate solutions |
30 |
| The fabrication of graphene-reinforced Al-based nanocomposites using high-pressure torsion |
30 |
| Origin of hydrogen trapping site in vanadium carbide precipitation strengthening steel |
30 |
| Boron doped ultrastrong and ductile high-entropy alloys |
29 |
| Dynamic shear deformation of a CrCoNi medium-entropy alloy with heterogeneous grain structures |
29 |
| Phase stability and distortion in high-entropy oxides |
29 |
| Material structure-property linkages using three-dimensional convolutional neural networks |
28 |
| Dynamic precipitation, segregation and strengthening of an Al-Zn-Mg-Cu alloy (AA7075) processed by high-pressure torsion |
28 |
| On the origin of microstructural banding in Ti-6Al4V wire-arc based high deposition rate additive manufacturing |
28 |
