| Microstructure Evolution of Inconel 718 Superalloy During Hot Working and Its Recent Development Tendency |
16 |
| Biomedical Magnesium Alloys: Composition, Microstructure and Corrosion |
14 |
| Deformation Behavior and Toughening of High-Entropy Alloys |
9 |
| Recent Progress in Research and Development of Nickel-Based Single Crystal Superalloys |
7 |
| Effect of Non-Isothermal Retrogression and Re-Ageing on Microstructure and Properties of Al-8Zn-2Mg-2Cu Alloy Thick Plate |
6 |
| Friction Stir Welding of Magnesium Alloys: A Review |
6 |
| Exploration on the Unified Model for Fatigue Properties Prediction of Metallic Materials |
6 |
| Numerical Simulation of Heat Generation, Heat Transfer and Material Flow in Friction Stir Welding |
5 |
| Basic Research in Development and Application of Cast Superalloy |
5 |
| Study on Freckle of a High-Alloyed GH4065 Nickel Base Wrought Superalloy |
5 |
| Finite Element Simulation of the Temperature Field and Residual Stress in GH536 Superalloy Treated by Selective Laser Melting |
5 |
| Effect of Sn Addition on Densification and Mechanical Properties of Sintered TiAl Base Alloys |
4 |
| Theoretical Calculation of Schmid Factor and Its Application Under High Strain Rate Deformation in Magnesium Alloys |
4 |
| Study on Formation Mechanism of Necklace Structure in Discontinuous Dynamic Recrystallization of Incoloy 028 |
4 |
| Influence of Layer Thickness on Microstructure and Mechanical Properties of Selective Laser Melted Ti-5Al-2.5Sn Alloy |
4 |
| Effect of Zr Addition on the Grain Refinement Mechanism of Mg-Gd-Er Alloys |
4 |
| Defect Induced Fatigue Behaviors of Selective Laser Melted Ti-6Al-4V via Synchrotron Radiation X-Ray Tomography |
4 |
| Microstructure and Mechanical Properties of Welded Joint of a Fe-Cr-Ni-Mo Steel with High-Strength and High-Toughness |
4 |
| Research Progress of Wrought Superalloys in China |
4 |
| Residual Stress Evolution and Its Mechanism During the Manufacture of Superalloy Disk Forgings |
4 |
| A New Class of Ordered Structure Between Crystals and Quasicrystals |
4 |
| Microstructure and Mechanical Properties of a Novel Cold Rolled Medium-Mn Steel with Superior Strength and Ductility |
3 |
| Dynamic Softening Mechanisms of GH4720Li Alloy During Hot Deformation |
3 |
| Influence of Hydrostatic Pressure on the Thermodynamics and Kinetics of Metal Corrosion |
3 |
| Research Progress of Numerical Simulation in Steelmaking and Continuous Casting Processes |
3 |
| Recent Progresses in Modeling of Nucleation During Solidification on the Atomic Scale |
3 |
| Study and Development on Numerical Simulation for Application of Electromagnetic Field Technology in Metallurgical Processes |
3 |
| Overview: SiC/Al Interface Reaction and Interface Structure Evolution Mechanism |
3 |
| A Study on the Initial Corrosion Behavior of Carbon Steel Exposed to a Simulated Coastal-Industrial Atmosphere |
3 |
| Effect of Austenitization Temperature on the Dry Sliding Wear Properties of a Medium Carbon Quenching and Partitioning Steel |
3 |
| Preparation and Performance of Spherical Ni Powder for SLM Processing |
3 |
| Annealing Process Optimization of High Frequency Longitudinal Resistance Welded Low-Carbon Ferritic Stainless Steel Pipe |
3 |
| Modification Mechanism of Cerium on the Inclusions in Drill Steel |
3 |
| Liquid-Liquid Phase Separation of Fe-Cu-Pb Alloy and Its Application in Metal Separation and Recycling of Waste Printed Circuit Boards |
3 |
| Microstructure and Tensile Property of TC4 Alloy Produced via Electron Beam Rapid Manufacturing |
3 |
| Corrosion Behavior of 2205 Steel in Simulated Hydrothermal Area |
3 |
| Study of Interference Parameters Variation Regularity and Corrosion Behavior of X80 Steel in Guangdong Soil Under High Voltage Direct Current Interference |
3 |
| Arc Erosion and Degradation Mechanism of Ag/Ti2AlC Composite |
3 |
| Effect of Hot Band Annealing Processes on Texture and Formability of 19Cr2Mo1W Ferritic Stainless Steel |
3 |
| Corrosion Behavior of Fe-Based Laser Cladding Coating in Hydrochloric Acid Solutions |
3 |
| Effect of High-Temperature Ageing on Microstructure and Mechanical Properties of Linear Friction Welded S31042 Steel Joint |
3 |
| Effect of Surface Roughness by Shot Peening on Stress Corrosion Cracking Behavior of Pure Titanium Welded Joints in HCl Solution |
3 |
| Research Progress in Age-Hardenable Mg-Sn Based Alloys |
3 |
| Effects of Triple Junction and Grain Boundary Characters on the Morphology of Carbide Precipitation in Alloy 690 |
3 |
| Dynamic Softening Behavior and Microstructure Evolution of Nickel Base Superalloy |
3 |
| Multi-Scale Study on the Fracture Behavior of Hot Compression B4C/6061Al Composite |
2 |
| Progress in High Throughput Fabrication and Characterization of Metal Matrix Composites |
2 |
| Influence of Annealing Process on Microstructures, Mechanical and Magnetic Properties of Nb-Containing High-Strength Non-Oriented Silicon Steel |
2 |
| Experimental and Numerical Simulation Study on Layer Casting Method for Composition Homogeneity on Ingot Casting |
2 |
| Fatigue Behavior of Friction Stir Welded SiCp/6092Al Composite |
2 |
