| Damage Characteristics of CFRP Laminates Subjected to Multiple Lightning Current Strike |
9 |
| Improvement of Progressive Damage Model to Predicting Crashworthy Composite Corrugated Plate |
9 |
| Influence of the Hybrid Combination of Multiwalled Carbon Nanotubes and Graphene Oxide on Interlaminar Mechanical Properties of Carbon Fiber/Epoxy Laminates |
8 |
| Thermal and mechanical properties of 3D printed boron nitride - ABS composites |
7 |
| Simulation of Mechanical Behavior and Damage of a Large Composite Wind Turbine Blade under Critical Loads |
7 |
| Numerical Evaluation of Dynamic Response for Flexible Composite Structures under Slamming Impact for Naval Applications |
7 |
| Micro-tomography based Geometry Modeling of Three-Dimensional Braided Composites |
7 |
| Meso-Scale Finite Element Analysis of Mechanical Behavior of 3D Braided Composites Subjected to Biaxial Tension Loadings |
7 |
| Quantifying the Influence of Lightning Strike Pressure Loading on Composite Specimen Damage |
6 |
| Curing of Thick Thermoset Composite Laminates: Multiphysics Modeling and Experiments |
6 |
| Computational Homogenization of Mechanical Properties for Laminate Composites Reinforced with Thin Film Made of Carbon Nanotubes |
5 |
| Experimental Study and Numerical Modelling of Low Velocity Impact on Laminated Composite Reinforced with Thin Film Made of Carbon Nanotubes |
5 |
| Evaluation of Basalt Fibre Composites for Marine Applications |
5 |
| Meso-Scale Progressive Damage Behavior Characterization of Triaxial Braided Composites under Quasi-Static Tensile Load |
5 |
| Buckling and Post-Buckling Behaviors of a Variable Stiffness Composite Laminated Wing Box Structure |
5 |
| Nonlinear Multi-Scale Modelling, Simulation and Validation of 3D Knitted Textiles |
5 |
| Multi-Scale Progressive Damage Model for Analyzing the Failure Mechanisms of 2D Triaxially Braided Composite under Uniaxial Compression Loads |
5 |
| Determination of Materials for Hybrid Design of 3D Soft Body Armour Panels |
5 |
| Principles and Applications of Microwave Testing for Woven and Non-Woven Carbon Fibre-Reinforced Polymer Composites: a Topical Review |
5 |
| A Comparative Study on Interlaminar Properties of L-shaped Two-Dimensional (2D) and Three-Dimensional (3D) Woven Composites |
5 |
| Thermal Characterization of Carbon Fiber-Reinforced Carbon Composites |
5 |
| Stability Analysis of Composite Columns under Eccentric Load |
5 |
| Coupled Thermal-Mechanical Progressive Damage Model with Strain and Heating Rate Effects for Lightning Strike Damage Assessment |
5 |
| A Comparison of the Properties of Carbon Fiber Epoxy Composites Produced by Non-autoclave with Vacuum Bag Only Prepreg and Autoclave Process |
5 |
| Topology Optimization of Lightweight Lattice Structural Composites Inspired by Cuttlefish Bone |
5 |
| Optimal Damping Behavior of a Composite Sandwich Beam Reinforced with Coated Fibers |
4 |
| Investigation into Composites Property Effect on the Forming Limits of Multi-Layer Hybrid Sheets Using Hydroforming Technology |
4 |
| Flexural Behavoiur of the Composite Sandwich Panels with Novel and Regular Corrugated Cores |
4 |
| The Impact Performance of Woven-Fabric Thermoplastic and Thermoset Composites Subjected to High-Velocity Soft- and Hard-Impact Loading |
4 |
| Fatigue Behaviour of Acrylic Matrix Composites: Influence of Seawater |
4 |
| Design of Tailored Non-Crimp Fabrics Based on Stitching Geometry |
4 |
| Telescopic Hydraulic Cylinder Made of Composite Material |
4 |
| Design and modeling of a combined embedded enhanced honeycomb with tunable mechanical properties |
4 |
| Modeling and Simulation of Voids in Composite Tape Winding Process Based on Domain Superposition Technique |
4 |
| Meso-Scale Finite Element Simulations of 3D Braided Textile Composites: Effects of Force Loading Modes |
4 |
| Engineering Design and Mechanical Property Characterisation of 3D Warp Interlock Woven Fabrics |
4 |
| Hybrid Composite Using Natural Filler and Multi-Walled Carbon Nanotubes (MWCNTs) |
4 |
| Detection and Evaluation of Pre-Preg Gaps and Overlaps in Glare Laminates |
4 |
| New Design Concept for an Excavator Arms by Using Composite Material |
3 |
| Microstructure Characterization by X-Ray Computed Tomography of C/C-SiC Ceramic Composites Fabricated with Different Carbon Fiber Architectures |
3 |
| A Unit-Cell Model for Predicting the Elastic Constants of 3D Four Directional Cylindrical Braided Composite Shafts |
3 |
| Investigation into the Fiber Orientation Effect on the Formability of GLARE Materials in the Stamp Forming Process |
3 |
| Damage evaluation of laminated composite material using a new acoustic emission Lamb-based and finite element techniques |
3 |
| Analysis of Mode I and Mode II Crack Growth Arrest Mechanism with Z-Fibre Pins in Composite Laminated Joint |
3 |
| Geometrical analysis of woven fabric microstructure based on micron-resolution computed tomography data |
3 |
| Development & Characterization of Green Composites Using Novel 3D Woven Preforms |
3 |
| Simulation and Experimental Validation of Spacer Fabrics Based on their Structure and Yarn's Properties |
3 |
| Surface Modification of Aramid Fibres with Graphene Oxide for Interface Improvement in Composites |
3 |
| Anisotropic Dielectric Properties of Carbon Fiber Reinforced Polymer Composites during Microwave Curing |
3 |
| Simulation of Delamination Growth at CFRP-Tungsten Aerospace Laminates Using VCCT and CZM Modelling Techniques |
3 |
