| Towards industrial implementation of glycine-based leach and adsorption technologies for gold-copper ores |
8 |
| The technology of CO2 sequestration by mineral carbonation: current status and future prospects |
8 |
| Influence of heat treatment conditions on the mechanical properties of Ti-6Al-4V alloy |
6 |
| Role of pH on the adsorption of xanthate and dithiophosphinate onto galena |
6 |
| Vortex characteristics due to nozzle clogging in water caster mould: modelling and validation |
4 |
| Investigation of wear behaviour and microstructure of hot-pressed TiB2 particulate-reinforced magnesium matrix composites |
4 |
| Characterisation of low-grade Barsua iron ore fines and identification of possible beneficiation strategies |
4 |
| A survey on troubleshooting of closed-circuit grinding system |
4 |
| Examination of the United Nations self-heating test for sulphides |
3 |
| Leaching behaviour of low-grade copper ore in the presence of organic acid |
3 |
| The effect of heat treatment on corrosion behaviour of Ni-P-3 gr/lit Cu nano-composite coating |
3 |
| Characteristics and properties of Cu/nano-SiC and Cu/nano-SiC/graphite hybrid composite coatings produced by pulse electrodeposition technique |
3 |
| Electrodeposition of metallic molybdenum and its alloys - a review |
3 |
| Preparation of Ti5Si3 by silicothermic reduction of titanium-bearing blast furnace slag |
3 |
| Oxidative acid leaching of mechanically activated sphalerite |
3 |
| Effects of martensite particle size and spatial distribution on work hardening behaviour of fine-grained dual-phase steel |
3 |
| Decomposition of monazite concentrate in sulphuric acid |
3 |
| Study on the thermal decomposition of aluminium chloride hexahydrate |
3 |
| Effect of pickling process on removal of oxide layer on the surface of ferritic stainless steel |
3 |
| Effects of scandium on hypoeutectic aluminium copper microstructures under low solidification rate conditions |
2 |
| Corrosion study of Al-Fe (20wt-%) alloy in artificial sea water with NaOH additions |
2 |
| Upgrading of iron ores using microwave assisted magnetic separation followed by dephosphorization leaching |
2 |
| Open circuit potential and leaching rate of pyrite in cupric chloride solution |
2 |
| Redox potential measurement during pressure oxidation (POX) of a refractory gold ore |
2 |
| Effect of water vapour partial pressure on the chromia (Cr2O3)-based scale stability |
2 |
| Effect of frequency and duty cycle on corrosion and wear resistance of functionally graded Zn-Ni nanocomposite coating |
2 |
| Friction stir welding of API X70 steel incorporating Ti-dioxide |
2 |
| Effect of shrouding Mach number and ambient temperature on the flow field of coherent jet with shrouding Laval nozzle structure |
2 |
| Alkaline leaching pretreatment and cyanidation of arsenical gold ore from the Carlin-type Zarshuran deposit |
2 |
| Fe(III)-As(V) precipitates obtained from a sulphate system and their leach stability |
1 |
| Pyrite oxidation with ozone: stoichiometry and kinetics |
1 |
| Metal flow performance in aluminium electrolytic cells with different side-wall types |
1 |
| Effect of oxygen flow rate and temperature on supersonic jet characteristics and fluid flow in an EAF molten bath |
1 |
| Reaction performances of mould slags with different SiO2 contents for 321 stainless steel |
1 |
| Magnetite reduction in copper converter slag using biodiesel produced from waste cooking oil |
1 |
| Computational modelling of water flow inside laboratory Knelson concentrator bowl |
1 |
| Distribution of harmful elements in dissected 125m(3) blast furnace |
1 |
| Experimental investigation of flow control devices effect on inclusion separation in a four strand tundish |
1 |
| Removal of arsenic from gold processing circuits by use of novel magnetic nanoparticles |
1 |
| Production of calcium metal by aluminothermic reduction of Egyptian limestone ore |
1 |
| Behaviour and characterization of hematite process for iron removal in hydrometallurgical production |
1 |
| Refractory/steel/inclusion interactions in Al-deoxidised valve spring steel treated with Na2CO3 |
1 |
| Co-extraction of tungsten and molybdenum from refractory scheelite-powellite blend concentrates by roasting with Na2CO3 and SiO2 and leaching with water |
1 |
| The impact of SAG pebbles as media vs steel media on flotation performance of a copper sulphide ore |
1 |
| Incorporation of matte-slag thermochemistry into sulphide smelter discrete event simulation |
1 |
| Microstructure and mechanical properties of copper alloyed austempered grey cast iron |
1 |
| Behaviours of supersonic oxygen jet with various Laval nozzle structures in steelmaking process |
1 |
| As, Sb, and Fe removal from industrial copper electrolyte by solvent displacement crystallisation technique |
1 |
| Corrosion behaviour of Al1.3CrFeNi chemically complex alloy |
0 |
| Potentiostatic studies of the influence of temperature on lead-silver anodes during electrowinning and decay period |
0 |
