| Durability of recycled aggregate concrete - A review |
81 |
| Use of biochar as carbon sequestering additive in cement mortar |
36 |
| Water absorption and electrical resistivity of concrete with recycled concrete aggregates and fly ash |
35 |
| Nano-silica and silica fume modified cement mortar used as Surface Protection Material to enhance the impermeability |
35 |
| The roles of biochar as green admixture for sediment-based construction products |
33 |
| Compressive strength and hydration process of wet-grinded granulated blast-furnace slag activated by sodium sulfate and sodium carbonate |
31 |
| Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing |
28 |
| Enhancing the strength of pre-made foams for foam concrete applications |
28 |
| Mechanical and thermal properties of lightweight geopolymer composites |
26 |
| Performance of mortar prepared with recycled concrete aggregate enhanced by CO2 and pozzolan slurry |
23 |
| Comparison of glass powder and pulverized fuel ash for improving the water resistance of magnesium oxychloride cement |
22 |
| Alkali-activated slag concrete: Fresh and hardened behaviour |
22 |
| Highly dispersed graphene oxide electrodeposited carbon fiber reinforced cement-based materials with enhanced mechanical properties |
22 |
| Efflorescence and subflorescence induced microstructural and mechanical evolution in fly ash-based geopolymers |
22 |
| Performance-based design of all-grade strain hardening cementitious composites with compressive strengths from 40 MPa to 120 MPa |
22 |
| Axial stress-strain behavior of macro-synthetic fiber reinforced recycled aggregate concrete |
21 |
| Effect of drying procedures on pore structure and phase evolution of alkali-activated cements |
21 |
| Estimating the optimal mix design of silica fume concrete using biogeography-based programming |
20 |
| Comparative pullout behavior of half-hooked and commercial steel fibers embedded in UHPC under static and impact loads |
20 |
| A self-reinforced cementitious composite for building-scale 3D printing |
20 |
| Enhancement of recycled aggregate properties by accelerated CO2 curing coupled with limewater soaking process |
19 |
| Synergistic effects of hybrid polypropylene and steel fibers on explosive spalling prevention of ultra-high performance concrete at elevated temperature |
19 |
| 3D printable concrete: Mixture design and test methods |
19 |
| Multi-scale investigation of microstructure, fiber pullout behavior, and mechanical properties of ultra-high performance concrete with nano-CaCO3 particles |
19 |
| Dispersion of graphene oxide agglomerates in cement paste and its effects on electrical resistivity and flexural strength |
18 |
| Impact of silica fume, fly ash, and metakaolin on the thickness and strength of the ITZ in concrete |
18 |
| Multiple-scale investigations on self-healing induced mechanical property recovery of ECC |
17 |
| Damage investigation of ultra high performance concrete under direct tensile test using acoustic emission techniques |
17 |
| An integrated design method of Engineered Geopolymer Composite |
17 |
| Effect of alkalinity and calcium concentration of pore solution on the swelling and ionic exchange of superabsorbent polymers in cement paste |
17 |
| Mechanical and microstructural properties of cement pastes containing carbon nanotubes and carbon nanotube-silica core-shell structures, exposed to elevated temperature |
17 |
| Durability performance of high-performance concrete made with recycled aggregates, fly ash and densified silica fume |
17 |
| Effect of sodium carbonate/sodium silicate activator on the rheology, geopolymerization and strength of fly ash/slag geopolymer pastes |
17 |
| The effect of synthesis conditions on the efficiency of C-S-H seeds to accelerate cement hydration |
17 |
| Numerical study of carbonation and its effect on chloride binding in concrete |
17 |
| Influence of different treatment methods on the mechanical behavior of recycled aggregate concrete: A comparative study |
16 |
| Compressive strength and microstructure of alkali-activated fly ash/slag binders at high temperature |
16 |
| MSWIBA-based cellular alkali-activated concrete incorporating waste glass powder |
16 |
| Influence of the alkaline solution and temperature on the rheology and reactivity of alkali-activated fly ash pastes |
16 |
| Assessment of self-healing and durability parameters of concretes incorporating crystalline admixtures and Portland Limestone Cement |
16 |
| Self-healing performance of aged cementitious composites |
16 |
| Pore structure of affected zone around saturated and large superabsorbent polymers in cement paste |
16 |
| How do fiber shape and matrix composition affect fiber pullout behavior and flexural properties of UHPC? |
16 |
| Effect of mix design inputs, curing and compressive strength on the durability of Na2SO4-activated high volume fly ash concretes |
16 |
| Improved interfacial strength of SiO2 coated carbon fiber in cement matrix |
16 |
| Characterizations of autogenous and drying shrinkage of ultra-high performance concrete (UHPC): An experimental study |
16 |
| Characterization of two-parameter fracture properties of portland cement concrete containing reclaimed asphalt pavement aggregates by semicircular bending specimens |
15 |
| Strength and self-desiccation of slag-cemented paste backfill at early ages: Link to initial sulphate concentration |
15 |
| A novel method to enhance the interlayer bonding of 3D printing concrete: An experimental and computational investigation |
15 |
| The influence of expansive cement on the mechanical, physical, and microstructural properties of hybrid-fiber-reinforced concrete |
15 |
