| Investigation on mechanical properties or aluminium 7075-boron carbide - coconut she fly ash reinforced hybrid metal matrix composites |
9 |
| Insulation effect of air cavity in sand mold using 3D printing technology |
5 |
| Nano-SiCP particles distribution and mechanical properties of Al-matrix composites prepared by stir casting and ultrasonic treatment |
5 |
| Effect of Al on microstructure and mechanical properties of cast CrCoNi medium-entropy alloy |
4 |
| Effect of SiO2 concentration in silica sol on interface reaction during titanium alloy investment casting |
4 |
| Effect of Cr on microstructure and oxidation behavior of TiAl-based alloy with high Nb |
3 |
| Effect of synergistic action of ultrasonic vibration and solidification pressure on tensile properties of vacuum counter-pressure casting aluminum alloy |
3 |
| Some paradoxical observations about spheroidal graphite degeneracy |
3 |
| Factors influencing power consumption and power-saving measures in ESR process |
3 |
| Effect of pressurizing speed on filling behavior of gradual expansion structure in low pressure casting of ZL205A alloy |
3 |
| Weibull analysis of fluidity and hardness of ultrasonically degassed secondary Al7Si0.3Mg aluminum alloy |
3 |
| Finite element analysis for die casting parameters in high-pressure die casting process |
3 |
| Humidity-resistant inorganic binder for sand core making in foundry practice |
3 |
| Studies on thermal decomposition of phenol binder using TG/DTG/DTA and FTIR-DRIFTS techniques in temperature range 20-500 degrees C |
3 |
| Recycling of waste foundry sands by chemical washing method |
3 |
| Microstructure and mechanical properties of AZ91 magnesium alloy with minor additions of Sm, Si and Ca elements |
3 |
| Effect of vacuum on porosity and mechanical properties of high-pressure die-cast pure copper |
3 |
| Inclusions in melting process of titanium and titanium alloys |
3 |
| Filling mode and regularity of vertical centrifugal casting process of titanium alloy in thin-walled cylinder cavity |
2 |
| Characterizations of precipitation behavior of Al-Mg-Si alloys under different heat treatments |
2 |
| Effects of hot top pulsed magneto-oscillation on solidification structure of steel ingot |
2 |
| A three dimensional modeling method or spherical open cell aluminum foams based on spherical core stratification algorithm |
2 |
| Selection of raw materials and control of trace elements for production of high-quality SG iron |
2 |
| Phase field simulation of secondary dendrite growth in directional solidification of binary alloys |
2 |
| Tensile behavior of Ti-6Al-4V alloy fabricated by selective laser melting: effects of microstructures and as-built surface quality |
2 |
| Effect of sigma phase precipitation on microstructure and properties of cast ZG0Cr26Ni5Mo3Cu3 duplex stainless steel under different heat treatments |
2 |
| Phase-field simulation of competitive growth of grains in a binary alloy during directional solidification |
2 |
| Effects of austempering temperature on microstructure and surface residual stress of carbidic austempered ductile iron (CADI) grinding balls |
2 |
| Distribution of SiC particles in semisolid electromagnetic-mechanical stir-casting Al-SiC composite |
2 |
| Influence of Ca addition on microstructure, mechanical properties and corrosion behavior of Mg-2Zn alloy |
2 |
| Effect of microstructure and mechanical properties on cutting force of different cast irons with similar tensile strength |
2 |
| Research progress on refractory composition and deformability of shell molds for TiAl alloy castings |
2 |
| Modeling studies on divorced eutectic formation of high pressure die cast magnesium alloy |
2 |
| Microstructure and mechanical properties of Al-10Si alloy modified with Al-5Ti |
2 |
| Effects of interface adhesive and resin cohesive strength on tensile strength of resin sand based on numerical analysis |
2 |
| Effect of nodularity on mechanical properties and fracture of ferritic spheroidal graphite iron |
1 |
| Effect of holding pressure on density and cooling rate of cast Al-Si alloy during additive pressure casting |
1 |
| Pyrolysis characteristics and thermal kinetics of expanded polystyrene (EPS) and styrene-methyl methacrylate (St-MMA) copolymer in LFC process |
1 |
| Gating system optimization of high pressure die casting thin-wall AlSi10MnMg longitudinal load-bearing beam based on numerical simulation |
1 |
| Effect of fluid flow on solidified equiaxed dendrite morphology evolution based on phase field - lattice Boltzmann method |
1 |
| Microstructure and properties of TP2 copper tube with La microalloying by horizontal continuous casting |
1 |
| A new fast heat treatment process for cast A356 alloy motorcycle wheel hubs |
1 |
| Tensile properties and microstructure of rheo-diecast 7075 alloy prepared by serpentine channel process |
1 |
| Evolution of interfacial dislocation networks during long term thermal aging in Ni-based Single crystal superalloy DD5 |
1 |
| Effects of trace Cr on as-cast microstructure and microstructural evolution of semi-solid isothermal heat treatment ZC61 magnesium alloy |
1 |
| Preparation of Al-Zn Mg-Cu alloy semisolid slurry through a water-cooled serpentine pouring channel |
1 |
| Single and double aging treatments on Mg97Zn1Y2 alloy |
1 |
| Solidification pathways and hot tearing susceptibility of MgZnxY4Zr0.5 alloys |
1 |
| Meets of heat treatment on microstructure and mechanical properties of Mg-6Zn-4Sm-0.4Zr alloy |
1 |
| Synergistic effects of composition and heat treatment on microstructure and properties of vacuum die cast Al-Si-Mg-Mn alloys |
1 |
