| Analytical and numerical models of the magnetoacoustic tomography with magnetic induction |
12 |
| Rotor radial disturbance control for a bearingless induction motor based on improved active disturbance rejection control |
7 |
| Multi-objective ant lion optimization algorithm to solve large-scale multi-objective optimal reactive power dispatch problem |
6 |
| Back scattering response from single, finite and infinite array of nonlinear antennas based on intelligent water drops algorithm |
6 |
| Short-term load forecasting for microgrids based on DA-SVM |
5 |
| Performance improvement of direct torque control for induction motor drive via fuzzy logic-feedback linearization: Simulation and experimental assessment |
4 |
| Fractional order super-twisting sliding mode observer for sensorless control of induction motor |
4 |
| Implementation of electrical impedance tomography for analysis of building moisture conditions |
4 |
| A MSFEM to simulate the eddy current problem in laminated iron cores in 3D |
3 |
| Numerical modelling on partial discharge in HVDC XLPE cable |
3 |
| Optimal reconfiguration/distributed generation integration in distribution system using adaptive weighted improved discrete particle swarm optimization |
3 |
| An analytical model of harmonic content no-load magnetic fields and Back EMF in axial flux PM machines regarding the iron saturation and winding distribution |
3 |
| A new metaheuristic unscented Kalman filter for state vector estimation of the induction motor based on Ant Lion optimizer |
3 |
| Elementary subdomain technique for magnetic field calculation in rotating electrical machines with local saturation effect |
3 |
| Adaptation of the penalty function method to genetic algorithm in electromagnetic devices designing |
3 |
| A novel variant of the H-phi field formulation for magnetostatic and eddy current problems |
3 |
| Observer based control scheme for DC-DC boost converter using sigma-delta modulator |
3 |
| Comparison of the reluctance laminated and solid rotor synchronous machine operating at high temperatures |
3 |
| FE analysis of coupled electromagnetic-thermal phenomena in the squirrel cage motor working at high ambient temperature |
3 |
| Modelling and applications of conductive elements on textile materials |
3 |
| Hierarchical paradigm for automated optimal design of dual-band wearable antenna with simplified human body models |
2 |
| Continuous local material model for the mechanical stress-dependency of magnetic properties in non-oriented electrical steel |
2 |
| High-frequency displacement current transformer with just one winding |
2 |
| Thermal breakdown in high voltage direct current cable insulations due to space charges |
2 |
| SDRE-based high performance feedback control for nonlinear mechatronic systems |
2 |
| Sensitivity studies and optimization of arrangements of optically pumped magnetometers in simulated magnetoencephalography |
2 |
| Performance analysis of segmented rotor switched reluctance motors with three types of winding connections for belt-driven starter generators of hybrid electric vehicles |
2 |
| Comparing unscented transformation and point estimate method for probabilistic power flow computation |
2 |
| Nonlinear behavior for periodically excited brushless motor |
2 |
| Statistical solution of inverse problems using a state reduction |
2 |
| Design and prototyping of the novel axial flux-switching permanent-magnet motor |
2 |
| A method for fault diagnosis of nonlinear circuits |
2 |
| Locating complex eigenvalues for analytical eddy-current models used to detect flaws |
2 |
| Incremental solidification (toward 3D-printing) of magnetically-confined metal-powder by localized microwave heating |
2 |
| An extended Kalman particle filter for power system dynamic state estimation |
2 |
| Parameter identification of Jiles-Atherton model using the chaotic optimization method |
2 |
| Cascaded signal processing approach for motor fault diagnosis |
2 |
| A stability controlling-based approach for designing 1-D variable fractional delay all-pass filters |
2 |
| Model of induction brazing of nonmagnetic metals using model order reduction approach |
2 |
| Singularity consideration in the integral equations for contactless inductive flow tomography |
2 |
| Fractional derivatives and the laws of electrical engineering |
2 |
| Modelling and co-simulation of a permanent magnet synchronous generator |
2 |
| Modeling of core loss for non-oriented electrical steel |
2 |
| Diagnosis of rotor broken bars faults in squirrel cage induction motor using continuous wavelet transform |
2 |
| A novel serial structure repetitive control strategy for shunt active power filter |
2 |
| A dynamic particle swarm optimization method applied to global optimizations of engineering inverse problem |
2 |
| Impact of PWM control frequency on efficiency of drive with 1 kW permanent magnet synchronous motor |
2 |
| Real-time implementation of discrete Fourier transform phase analysis and fault tolerant control for PMSM in electric vehicles |
2 |
| Measurements show need for transformer core joint details in finite element modelling of GIC and DC effects |
2 |
| Miniaturized quad-band coplanar-fed monopole antenna for tablet computers |
2 |
