| Effects of axial load on nonlinear response of RC columns subjected to lateral impact load: Ship-pier collision |
33 |
| Experimental investigations on monotonic and cyclic behavior of steel pallet rack connections |
29 |
| A review on pipeline integrity management utilizing in-line inspection data |
27 |
| Fracture failure analysis of hard and thick key layer and its dynamic response characteristics |
24 |
| Review and benchmark study on the analysis of low-velocity impact on composite laminates |
23 |
| Probabilistic failure analysis of reinforced concrete beam-column sub-assemblage under column removal scenario |
20 |
| Classification of failure modes in ductile and non-ductile concrete joints |
18 |
| Analysis of varying contact angles and load distributions in defective angular contact ball bearing |
16 |
| Combating hot corrosion of boiler tubes - A study |
16 |
| Defects as a root cause of fatigue failure of metallic components. I: Basic aspects |
16 |
| Mechanical integrity of 18650 lithium-ion battery module: Packing density and packing mode |
14 |
| Damage assessment and collapse investigation of three historical masonry palaces under seismic actions |
14 |
| Defects as a root cause of fatigue failure of metallic components. III: Cavities, dents, corrosion pits, scratches |
13 |
| Study on repair control technology of soft surrounding rock roadway and its application |
13 |
| Role of cold rolled followed by annealing on improvement of hydrogen induced cracking resistance in pipeline steel |
12 |
| Effect of residual and external stress on corrosion behaviour of X80 pipeline steel in sulphate-reducing bacteria environment |
12 |
| Modified response surface method basis harmony search to predict the burst pressure of corroded pipelines |
12 |
| Analysis of the effects of vibration modes on fatigue damage in high-speed train bogie frames |
12 |
| A new critical plane-energy model for multiaxial fatigue life prediction of turbine disc alloys |
12 |
| Damage assessment and partial failure mechanisms activation of historical masonry churches under seismic actions: Three case studies in Mantua |
12 |
| Unitary model for the analysis of bolted connections using the finite element method |
12 |
| Seismic performance assessment of plain concrete arch bridges under near-field earthquakes using incremental dynamic analysis |
11 |
| Failure analysis on premature fracture of anchor bolts in seawater booster pump of nuclear power plant |
11 |
| Reliability analysis of low, mid and high-grade strength corroded pipes based on plastic flow theory using adaptive nonlinear conjugate map |
11 |
| Reliability analysis based on hybrid algorithm of M5 model tree and Monte Carlo simulation for corroded pipelines: Case of study X60 Steel grade pipes |
11 |
| Deformation and meshing stiffness analysis of cracked helical gear pairs |
11 |
| Reliability assessments of corroded pipelines based on internal pressure - A review |
11 |
| UB-ALMANAC: An adaptive limit analysis NURBS-based program for the automatic assessment of partial failure mechanisms in masonry churches |
11 |
| Effects of grain size and texture on stress corrosion cracking of friction stir processed AZ80 magnesium alloy |
11 |
| Defects as a root cause of fatigue failure of metallic components. II: Non-metallic inclusions |
11 |
| Seismic performance and failure modes of the Jin'anqiao concrete gravity dam based on incremental dynamic analysis |
10 |
| Seismic vulnerability assessment for the historical areas of the Timisoara city, Romania |
10 |
| Study on effect of double austenitization treatment on fracture morphology tensile tested nuclear grade P92 steel |
10 |
| Assessment of dynamic increase factor for progressive collapse analysis of RC structures |
10 |
| Incremental dynamic analysis of small to medium spans plain concrete arch bridges |
10 |
| A new approach to assess the remaining strength of corroded steel pipes |
10 |
| Analysis of disc cutter failure in shield tunnelling using 3D circular cutting theory |
10 |
| An overview of the recurrent failures of duplex stainless steels |
10 |
| Prediction of failure stages for double lap joints using finite element analysis and artificial neural networks |
10 |
| A review on the wear of oil drill bits (conventional and the state of the art approaches for wear reduction and quantification) |
10 |
| Crashworthiness optimal design of multi-cell triangular tubes under axial and oblique impact loading |
9 |
| Crack growth modeling in spur gear tooth and its effect on mesh stiffness using extended finite element method |
9 |
| Stress-strain calculation and fatigue life assessment of V-shaped notches of turbine disk alloys |
9 |
| Case analysis and CFD numerical study on gas explosion and damage processing caused by aging urban subsurface pipeline failures |
9 |
| Stress corrosion crack evaluation of super 13Cr tubing in high-temperature and high-pressure gas wells |
9 |
| Failure probability of corroded pipeline considering the correlation of random variables |
9 |
| Evaluation of microstructural degradation in a failed gas turbine blade due to overheating |
9 |
| Failure analysis of fretting fatigue initiation and growth on railway axle press-fits |
9 |
| Converting data into knowledge for preventing failures in power transformers |
9 |
| Numerical simulation of competing mechanism between pitting and micro-pitting of a wind turbine gear considering surface roughness |
9 |
