| Properties of wood treated with compound systems of paraffin wax emulsion and copper azole |
10 |
| Stress wave evaluation by accelerometer and acoustic emission sensor for thermally modified wood classification using three types of neural networks |
10 |
| Chemical characterization of wood treated with a formulation based on propolis, caffeine and organosilanes |
9 |
| A non-contact method for the determination of fibre direction of European beech wood (Fagus sylvatica L.) |
9 |
| Length and orientation direction effect on static bending properties of laminated Moso bamboo |
8 |
| Synthesis, structure characterization and application of melamine-glyoxal adhesive resins |
8 |
| Lignocellulosic waste fibers and their application as a component of urea-formaldehyde adhesive composition in the manufacture of plywood |
7 |
| Initial study on the use of support vector machine (SVM) in tool condition monitoring in chipboard drilling |
6 |
| Density and some mechanical properties of densified and heat post-treated Uludag fir, linden and black poplar woods |
6 |
| Chemical and anatomical characterization, and antioxidant properties of barks from 11 Eucalyptus species |
6 |
| The influence of veneer thickness and knot proportion on the mechanical properties of laminated veneer lumber (LVL) made from secondary quality hardwood |
6 |
| Comparison of three systems for automatic grain angle determination on European hardwood for construction use |
6 |
| The impact of natural and artificial weathering on the visual, colour and structural changes of seven tropical woods |
6 |
| Seismic protection technologies for timber structures: a review |
6 |
| Prediction of equilibrium moisture content and specific gravity of heat treated wood by artificial neural networks |
6 |
| Effect of short-term thermomechanical densification of wood veneers on the properties of birch plywood |
6 |
| Influence of high voltage electrostatic field (HVEF) on bonding characteristics of Masson (Pinus massoniana Lamb.) veneer composites |
6 |
| Protection of Moso bamboo (Phyllostachys pubescens) materials against fungal decay and discolouration by treatment with wood preservatives |
6 |
| Moisture-dependent mechanical properties of longitudinally compressed wood |
5 |
| Development of schedule to steaming prior to drying and its effects on Eucalyptus grandis x E-urophylla wood |
5 |
| Particleboard bonded with bio-hardeners of tannin adhesives |
5 |
| Micromechanical properties of longitudinally compressed wood |
5 |
| Bending performance of nail-laminated timber constructed of fast-grown plantation eucalypt |
5 |
| Influence of pressing parameters on dimensional stability and density of compressed beech wood |
5 |
| The properties of Moso bamboo heat-treated with silicon oil |
5 |
| Modification of wood with formulations of phenolic resin and iron-tannin-complexes to improve material properties and expand colour variety |
5 |
| Thermal, physical and mechanical properties of surface overlaid bark-based insulation panels |
5 |
| Effects of saturated steam pretreatment on the drying quality of moso bamboo culms |
5 |
| Accessibility of hydroxyl groups in furfurylated wood at different weight percent gains and during Rhodonia placenta decay |
5 |
| Prediction of modulus of elasticity in static bending and density of wood at different moisture contents and feed rates by drilling resistance measurements |
4 |
| Ex-situ performance of extracts from naturally durable heartwood species and their potential as wood preservatives |
4 |
| Comparative study on radical scavenging activity and phenolic compounds content in water bark extracts of alder (Alnus glutinosa (L.) Gaertn.), oak (Quercus robur L.) and pine (Pinus sylvestris L.) |
4 |
| Modelling and multi objective optimization of bamboo reinforced concrete beams using ANN and genetic algorithms |
4 |
| Assessment of polyphenol content and antioxidant activity of oak bark extracts |
4 |
| Effects of resin open time and melamine addition on cold pre-pressing performance of a urea-formaldehyde resin |
4 |
| Improvements in the production of wood fiber insulation boards using hot-air/hot-steam process |
4 |
| Modification of beech veneers with lignin phenol formaldehyde resins in the production of laminated veneer lumber (LVL) |
4 |
| Improving the physical and mechanical properties of particleboards made from urea-glyoxal resin by addition of pMDI |
4 |
| Peeling of small diameter rubber log using spindleless lathe technology: evaluation of veneer properties from outer to inner radial section of log at different veneer thicknesses |
4 |
| Optimal power consumption and surface quality in the circular sawing process of Douglas-fir wood |
4 |
| Dynamic mechanical analysis and creep-recovery behavior of agglomerated cork |
4 |
| Synergistic effect of treatment with disodium octaborate tetrahydrateand guanyl urea phosphate on flammability of pine wood |
4 |
| Ligneous resole adhesives for exterior-grade plywood |
4 |
| Enhanced bonding strength of heat-treated wood using a cold atmospheric-pressure nitrogen plasma jet |
4 |
| Revealing the impacts of recycled urea-formaldehyde wastes on the physical-mechanical properties of MDF |
4 |
| Direct screening method to assess antimicrobial behavior of untreated wood |
4 |
| Inhibited wood degradation of cement-coated beech Laminated Veneer Lumber (LVL) for temporary in-ground applications |
4 |
| Effects of recycled fiber content on the properties of medium density fiberboard |
4 |
| UV-VIS spectral and GC-MS characterization of Handroanthus serratifolius (Vahl.) Grose (a.k.a. Tabebuia serratifolia (Vahl.) Nichols/Lapacho) heartwood main extractives: a comparison of protocols aimed at a practical evaluation of Lapachol and Dehydro-alpha-Lapachone content |
4 |
| Development of plywood using geopolymer as binder: effect of silica fume on the plywood and binder characteristics |
4 |
