| Non-Model Based Expansion from Limited Points to an Augmented Set of Points Using Chebyshev Polynomials |
11 |
| Study of Ball Burnishing Process on the Surface Roughness and Microhardness of AZ91D Alloy |
6 |
| Classification of Ball Bearing Faults Using Vibro-Acoustic Sensor Data Fusion |
5 |
| Modeling and Testing Friction Flexible Dampers: Challenges and Peculiarities |
4 |
| Experimental and Numerical Investigation on Vibration of Sandwich Plates with Honeycomb Cores Based on Radial Basis Function |
4 |
| Experimental Investigations and Parametric Optimization of Process Parameters on Shrinkage Characteristics of Selective Inhibition Sintered High Density Polyethylene Parts |
3 |
| Residual Useful Life Prediction for Slewing Bearing Based on Similarity under Different Working Conditions |
3 |
| Low-Cycle Fatigue, Fractography and Life Assessment of EN AW 2024-T351 under Various Loadings |
3 |
| The Effect of Loading Frequency on Fatigue Life of Green onyx under Fully Reversed Loading |
3 |
| A Practical Procedure for Measuring the Stiffness of Foam like Materials |
3 |
| Investigating Mechanical Properties of Small Scale Resistance Spot Welding of a Nickel Based Superalloy through Statistical DOE |
3 |
| Dynamic Mechanical and Thermal Analyses of Objet Connex 3D Printed Materials |
3 |
| Real-Time Optical Measurement of Displacements Using Subpixel Image Registration |
3 |
| MDCCS Based Multistage Life Prediction of Slewing Bearing with a Novel Performance Description: an Improved Variational Mode Decomposition Approach |
3 |
| Material and Mechanical Characterization of Multi-Functional Carbon Nanotube Reinforced Hybrid Composite Materials |
2 |
| Mechanical Properties of AISI 1045 Steel Subjected to Combined Loads of Tension and Torsion |
2 |
| Assessment of Optimization Methods Used to Determine Plasticity Parameters Based on DIC and back Calculation Methods |
2 |
| Displacement Measurement Errors in Digital Image Correlation Due to Displacement Mapping Function |
2 |
| Single and Multi-Response Optimization and Validation of Mechanical Properties in Dissimilar Friction Stir Welded AA2219-T87 and AA7075-T73 Alloys Using T-GRA |
2 |
| Modified Dual Piezo Configuration for Improved Structural Health Monitoring Using Electro-Mechanical Impedance (EMI) Technique |
2 |
| Residual Stress Analysis on Thin Metal Sheets Using the Incremental Hole Drilling Method - Fundamentals and Validation |
2 |
| Investigation on Wet Skid Resistance of Tread Rubber |
2 |
| Contact Angle Measurement Tool Based on Image Analysis |
2 |
| Load Distribution Calculation of a four-Point-Contact Slewing Bearing and its Experimental Verification |
2 |
| Use of Factorial Designs and the Response Surface Methodology to Optimize a Heat Staking Process |
2 |
| Investigation into the Development and Testing of a Simplex Capacitance Sensor for Rotor Tip Clearance Measurement in Turbo Machinery |
2 |
| The Application of Full-Field Techniques to Estimate both Tensile and Fracture Properties: an Investigation into Modifications to Standard Sample Geometries |
2 |
| The Investigation and Optimization of Process Parameters in Warm Deep Drawing of ASS304 Steel Using Box Behnken Design and Applying Temperature Gradient |
2 |
| Acoustic Emission Responses of Three Typical Metals During Plastic and Creep Deformations |
2 |
| Tool Path Generation for Multi-Degree-of-Freedom Fast Tool Servo Diamond Turning of Optical Freeform Surfaces |
2 |
| A New Experimental System for Quantifying the Multidimensional Loads on an on-Site Hydraulic Support in Steeply Dipping Seam Mining |
2 |
| New Test Method of Wind Pressure Coefficient Based on CAARC Standard Model Determined Using Vehicle Driving Wind |
2 |
| Vibration Region Analysis for Condition Monitoring of Gearboxes Using Image Processing and Neural Networks |
2 |
| A Novel Test Method for Aerodynamic Coefficient Measurements of Structures Using Wind Generated by a Moving Vehicle |
1 |
| The Running-in Micro-Mechanism and Efficient Work Conditions of Cu-Based Friction Material against 65Mn Steel |
1 |
| Experimental Setup of an Innovative Multi-Axle Roller Rig for the Investigation of the Adhesion Recovery Phenomenon |
1 |
| Strain Gauges Based 3D Shape Monitoring of Beam Structures Using Finite Width Gauge Model |
1 |
| Damage Constitutive Model Based on Energy Dissipation for Frozen Sandstone Under Triaxial Compression Revealed by X-Ray Tomography |
1 |
| A Review of Cruciform Biaxial Tensile Testing of Sheet Metals |
1 |
| Closed Loop Ball End Magnetorheological Finishing Using In-situ Roughness Metrology |
1 |
| Automated Model Updating Effect on the Linear and Nonlinear Dynamic Responses of Historical Masonry Structures |
1 |
| A Novel Single Camera Robotic Approach for Three-Dimensional Digital Image Correlation with Targetless Extrinsic Calibration and Expanded View Angles |
1 |
| Characterization of Fracture Toughness Properties of Aluminium Alloy for Pipelines |
1 |
| Evaluation of the Performance of Initiator on Energy Absorption of Foam-Filled Rectangular Tubes: Experimental and Numerical Assessment |
1 |
| Analysis of Tool Chatter in Terms of Chatter Index and Severity Using a New Adaptive Signal Processing Technique |
1 |
| Accurate Data Reduction for the Uniaxial Compression Test |
1 |
| Wear Predicted Model of Tread Rubber Based on Experimental and Numerical Method |
1 |
| Experimental and FEM Study of Residual Stresses During Ultra-Precision Turning of Aluminum 2024-T3 |
1 |
| Impact Series Shaker Excitation Approach for Structural Modal Testing in Thermal Environments |
1 |
| Investigation on Vibration Response of Aluminum Foam Beams Using Speckle Interferometry |
1 |
