| Selected Review of the Degradation of Pt and Pd-based Carbon-supported Electrocatalysts for Alkaline Fuel Cells: Towards Mechanisms of Degradation |
18 |
| Techno-economic Analysis of a More Efficient Hydrogen Generation System Prototype: A Case Study of PEM Electrolyzer with Cr-C Coated SS304 Bipolar Plates |
12 |
| Effect of Co-Ni Ratio in Graphene Based Bimetallic Electro-catalyst for Methanol Oxidation |
10 |
| Economic and Environmental Prospects for Battery Electric- and Fuel Cell Vehicles: A Review |
10 |
| Novel Concept for Evaporative Cooling of Fuel Cells: an Experimental Study Based on Neutron Imaging |
9 |
| Post-test Characterization of Metallic Materials and Adjacent Components in an SOFC Stack After 000 h Operation at 700 degrees C |
8 |
| Modeling the Mechanical Integrity of Generic Solid Oxide Cell Stack Designs Exposed to Long-term Operation |
7 |
| Soluble Polystyrene-b-poly (ethylene/butylene)-b-polystyrene Based Ionomer for Anion Exchange Membrane Fuel Cells Operating at 70 degrees C |
7 |
| Impact of Platinum Loading on Performance and Degradation of Polymer Electrolyte Fuel Cell Electrodes Studied in a Rainbow Stack |
6 |
| Direct Coupling of PEM Fuel Cell to Supercapacitors for Higher Durability and Better Energy Management |
6 |
| Investigation of a New Anion Exchange Membrane-based Direct Ammonia Fuel Cell System |
6 |
| Achievements of NEDO Durability Projects on SOFC Stacks in the Light of Physicochemical Mechanisms |
6 |
| Techno-economic Analysis of a Stand-alone Hybrid Wind/Fuel Cell Microgrid System: A Case Study in Kouhin Region in Qazvin |
5 |
| Operation Strategies Based on Carbon Corrosion and Lifetime Investigations for High Temperature Polymer Electrolyte Membrane Fuel Cell Stacks |
5 |
| Characterization of an H-2/O-2 PEMFC Short-Stack Performance Aimed to Health-State Monitoring and Diagnosis |
5 |
| Multi-Scale Imaging of Polymer Electrolyte Fuel Cells using X-ray Micro- and Nano-Computed Tomography, Transmission Electron Microscopy and Helium-Ion Microscopy |
5 |
| Nanostructured Polyaniline: An Efficient Support Matrix for Platinum-Ruthenium Anode Catalyst in Direct Methanol Fuel Cell |
5 |
| Fuel Cell Electrolytes of Polybenzimidazole Membranes Cross-linked with Bis(chloromethyl) Arenes |
5 |
| Acid Distribution and Durability ofHT-PEM Fuel Cells with Different Electrode Supports |
5 |
| Application of Metal Foam as a Flow Field for PEM Fuel Cell Stack |
5 |
| Microstructure Reconstruction and Characterization of the Porous GDLs for PEMFC Based on Fibers Orientation Distribution |
5 |
| Pt Supported on Carbon-coating Antimony Tin Oxide as Anode Catalyst for Direct Methanol Fuel Cell |
4 |
| Effects of Ionomer Carbon Ratio and Ionomer Dispersity on the Performance and Durability of MEAs |
4 |
| Influence of Water and Temperature onIonomer in Catalytic Layers and Membranes of Fuel Cells and Electrolyzers Evaluated by AFM |
4 |
| Mo-doped CeO2 Synthesized by the Combustion Method for Carbon-Air Solid Oxide Fuel Cell (CA-SOFC) Applications |
4 |
| Composite Membranes of PVDF Nanofibers Impregnated with Nafion for Increased Fuel Concentrations in Direct Methanol Fuel Cells |
4 |
| Sulfonated Oligomer-crosslinked Fluorinated Poly(aryl ether sulfone)-based Proton Exchange Membranes for Fuel Cells |
4 |
| Control of PEM Fuel Cell Systems Using Interval Type-2 Fuzzy PID Approach |
4 |
| Efficient Pt-C MEA for PEMFC with Low Platinum Content Prepared by Magnetron Sputtering |
4 |
| Pt-Sn-Eu/C Catalysts: Application of Rare Earth Metals as Anodes in Direct Ethanol Fuel Cells |
4 |
| Reaction Mechanism and Impact of Microstructure on Performances for the LSCF-CGO Composite Electrode in Solid Oxide Cells |
4 |
| Single Cell Study of Water Transport in PEMFCs with Electrosprayed Catalyst Layers |
4 |
| Degradation in Solid Oxide Electrolysis Cells During Long Term Testing |
3 |
| Status on Demonstration of Fuel Cell Based Micro-CHP Units in Europe |
3 |
| Effect of Pretreatment on Microstructure and Mechanical Properties of Nafion (TM) XL Composite Membrane |
3 |
| Electrochemical Characterization of Pre-conditioning Process of Electrospun Nanofiber Electrodes in Polymer Electrolyte Fuel Cells |
3 |
| Energy Analysis of Fuel Cell Electric Vehicles (FCEVs) under European Weather Conditions and Various Driving Behaviors |
3 |
| Comparison of Different Perovskite Cathodes in Solid Oxide Fuel Cells |
3 |
| Development of a Self-supporting Microporous Layer on a Metal Mesh for Carbon Backing-free Cathodes in Proton Exchange Membrane Fuel Cells |
3 |
| Nafion/IL Intermediate Temperature Proton Exchange Membranes Improved by Mesoporous Hollow Silica Spheres |
3 |
| Investigation of the Effect of Humidity Level of H-2 on Cell Performance of a HT-PEM Fuel Cell |
3 |
| Direct Electricity Generation from Dissolved Cellulosic Biomass in an Alkaline Fuel Cell |
3 |
| Accelerating Fuel Cell Development with Additive Manufacturing Technologies: State of the Art, Opportunities and Challenges |
3 |
| Direct One-pot Synthesis of Carbon Supported Ag-Pt Alloy Nanoparticles as High Performance Electrocatalyst for Fuel Cell Application |
3 |
| Osmotic Pressure Compensated Solute Ectoine Improves Salt Tolerance of Microbial Cells in Microbial Fuel Cells |
3 |
| 3D-printed Current Collector Plates: Simulation and Performance Evaluation in a Mini Fuel Cell |
3 |
| Rapid and Flash Tests: Indicator for Quality of HT-PEM Fuel Cells Batches? |
2 |
| Long-term Operation of High Temperature Polymer Electrolyte Membrane Fuel Cells with Fuel Composition Switching and Oxygen Enrichment |
2 |
| Direct Hybridization of Polymer Exchange Membrane Surface Fuel Cell with Small Aqueous Supercapacitors |
2 |
| Comparative Analysis of Two Online Identification Algorithms in a Fuel Cell System |
2 |
