| Production of Very Fine, Spherical, Particles of Ferriferous Pigments from the Diatomaceous Raw Material of Kazakhstan |
15 |
| Production of Ceramic Materials Based on SiC with Low-Melting Oxide Additives |
6 |
| Cold Sintering of ZnO Ceramic in Water Medium: Test Demonstration |
4 |
| Calcium Phosphate Ceramic in the System Ca(PO3)(2)-Ca2P2O7 Based on Powder Mixtures Containing Calcium Hydrophosphate |
3 |
| Chemical, Phase Compositions and Porosity Structure of the Plinth Brick of the White Tower (Greece) of Age Greater Than 450 Yr |
3 |
| Effect of Gold Nanoparticles on the Spectral Luminescence Properties of Eu3+-Doped Phosphate Glass |
3 |
| Ash-Slag Based Cellular Glass for Energy-Efficient 3-Ply Construction Panels |
3 |
| Tungsten-Containing Bioactive Radiocontrast Glass: Production and Properties |
3 |
| Structure Formation in Cellular Glass Based on Novocherkassk CHPP Ash-Slag Wastes |
2 |
| NEW HIGH-STRENGTH BUILDING MATERIALS BASED ON METALLURGY WASTES |
2 |
| Glass-Fiber Reinforced Plastics Construction Materials of the Sixth Technological Paradigm? |
2 |
| Creation of Three-Dimensional Ceramic Structures with Prescribed Architecture Based on the System Ca2P2O7-CaNa2P2O7 |
2 |
| Determination of the Average Capillary Radius of Porous Materials |
2 |
| Investigation of Electrodes with an Active Layer of a Mixture of the Oxides TiO RuO SnO2 |
2 |
| Building Ceramic from Mining Wastes |
2 |
| Rheological Basis of Hollow Glass Microsphere Production Based on Alkali-Borosilicate Systems |
2 |
| Anion-Exchange Synthesis of Copper Ferrite Powders |
2 |
| Investigations of the Black Core and Swelling in Firing Porcelain Stoneware |
1 |
| Rheological Properties of Zirconium Oxide Suspensions in Acrylate Monomers For Use In 3D Printing |
1 |
| Production of Ytterbium Ceramic for Medical Radioactive Sources |
1 |
| Physicochemical Studies of Raw Materials from the Far East Russia for Synthesizing Foam Glass and Protective Enamel Coatings |
1 |
| Methods of Additive Technologies for the Manufacture of Ceramic Products (Review) |
1 |
| Formation of the Structure and Phase Composition of Polycrystalline Diamond with Cobalt Infiltration in the System Diamond - Hard Alloy |
1 |
| Quality Improvement of Construction Products Based on Technogenic Cullet |
1 |
| Light and Sound Emission from Impact-Damaged ZnS and ZnSe Ceramics |
1 |
| Piezoelectric Transformer Aided X-Ray Generation in Vacuum |
1 |
| Femtosecond Laser Assisted Local Crystallization of Barium-Titanate-Silicate Glass |
1 |
| Sol-Gel Synthesis of Anti-Reflective Mesoporous Coatings Based on Silicon Dioxide |
1 |
| Synthesis of New Materials in the Boron-Carbon System |
1 |
| Clay Modifier Activation for Ceramic Brick by Ultrasonic Extrusion |
1 |
| Effect of Boron-Containing Components on the Technological Properties of Basaltic Melts and Glasses |
1 |
| Calculation of Thermal Processes in a Bonded Diamond Tool During Grinding of Glass and Other Materials |
1 |
| CONVERGENCE CHECK OF DATA FROM STEP-BY-STEP EXPERIMENTAL-COMPUTATIONAL MAGNETIC CONTROL OF IRON IMPURITIES IN RAW MATERIALS USING DIFFERENT FIELD SOURCES |
1 |
| SOL-GEL SYNTHESIS BY MEANS OF EUTECTIC ADDITIVES FOR SILICON CARBIDE BASED CERAMIC |
1 |
| Glass Formation in the Materials System Quartz Sand - Colemanite - Soda |
1 |
| Latest Research on the Development of High-Quality Aluminum-Oxide Ceramics (Review). Part 2. Synthesis and Sintering of Nanopowders, Sol-Gel and Other Methods of Producing Finely Disperse and Fibrous Aluminum Oxide |
1 |
| Nanoporous Glass with Controlled Pore Size for High-Efficiency Synthesis of Oligonucleotides |
1 |
| Optimal Fractional Composition of Batch for Synthesis of Foam-Glass Materials Based on Diatomite from the Chernoyarskoe Deposit |
1 |
| Formation of Zr-La-O Oxide Phases in the Thermochemical Transformation of Modified Zirconium Hydroxide |
1 |
| Mechanochemical Oxidation of Aluminum: Formation of the Porous Structure of Aluminum Hydroxides and Oxides |
1 |
| RADIOPROTECTIVE GLASSES |
1 |
| Temperature Impact on the Stability of Wetting Water Films on Quartz Surfaces |
1 |
| Effect of the Ratio SiO2/Al2O3 on the Structure, Properties, and Thermal Stability of Geopolymer Refractory Materials |
1 |
| SYNTHESIS OF COBALT SPINEL: EFFECT OF MECHANICAL ACTIVATION AND MAGNESIUM/ZINC ION DOPING |
1 |
| Comparative Analysis of Plasma Bioceramic Coatings Based on Zinc-Substituted Hydroxyapatite and Tricalcium Phosphate |
1 |
| Glass Coating Deposition Temperature on the Inner Surface of Heat-Exchange Tube |
1 |
| Artificial Porous Aggregate Based on Cullet and Ash-Slag Wastes |
1 |
| Porous Functional Coatings by Microarc Oxidation |
1 |
| Low-Temperature Co-Firing Ceramic Li2Zn3Ti4O12 Modified by Li2O-ZnO-B2O3 Eutectic Additive |
1 |
| Study of Electrode Materials Based on Mixtures of Rare-Earth Metal, Titanium, and Ruthenium Oxides |
1 |
