| Analytical modelling of eddy current response from driver pick-up coils on multi-layered conducting plates |
5 |
| Ultrasonic phased array inspection of wire plus arc additive manufacture samples using conventional and total focusing method imaging approaches |
5 |
| Study on the adaptive wavelet threshold denoising method for coal mine hoisting wire rope signals based on novel thresholding function |
3 |
| Development of a technique for inspecting the foundations of offshore wind turbines |
3 |
| Fracture life estimation of Al-1050 thin beams using empirical data and a numerical approach |
3 |
| Automatic classification of welding defects from ultrasonic signals using an SVM-based RBF neural network approach |
3 |
| Applications of non-linear imaging microscopy techniques to cultural heritage objects |
3 |
| Guided wave sensor for simple digital communication through an oil industry multi-wire cable |
3 |
| Fault severity recognition based on self-adaptive particle swarm optimisation using wavelet kernel extreme learning machine |
3 |
| An image recognition method for gear fault diagnosis in the manufacturing line of short filament fibres |
3 |
| Cost-effective risk-based inspection planning for offshore wind farms |
2 |
| Detection of sub-surface defects in ferromagnetic steels using a pulsed eddy current technique |
2 |
| Eddy current testing device for detecting pipeline defects based on the principle of differential excitation |
2 |
| Quantitative identification of microcracks through magnetic flux leakage testing based on improved back-propagation neural network |
2 |
| Effects of relative motion on a Rayleigh wave electromagnetic acoustic transducer operating on aluminium |
2 |
| Prospects and challenges of the Fourth Industrial Revolution for instrument engineering and metrology in the field of non-destructive testing and condition monitoring |
2 |
| A simultaneous non-destructive characterisation method for grain size and single-crystal elastic constants of cubic polycrystals from ultrasonic measurements |
2 |
| Index-based triangulation method for efficient generation of large three-dimensional ultrasonic C-scans |
2 |
| Permeability invariance phenomenon and measurement of electrical conductivity for ferrite metallic plates |
2 |
| Detection of corrosion pits based on an analytically optimised eddy current sensor |
2 |
| Acoustic emission beamforming localisation approach based on particle swarm optimisation |
2 |
| Vibration-based fault diagnosis method for conrod small-end bearing knock in internal combustion engines |
2 |
| Feature extraction-based prediction of tool wear of Inconel 718 in face turning |
2 |
| Recent advances in magnetic non-destructive testing and the application of this technique to remanufacturing |
2 |
| Risk assessment of failure mode and effects analysis (FMEA) under hesitant fuzzy information |
2 |
| Instant dynamic response measurements for crack monitoring in metallic beams |
2 |
| Imaging a weld cross-section using a novel frequency feature in multi-frequency eddy current testing |
2 |
| Cutting forces and acoustic emission in the diamond turning of rapidly-solidified aluminium |
2 |
| Non-linear ultrasonic spectroscopy of 3D printed metallic samples |
1 |
| EM sensor array system and performance evaluation for in-line measurement of phase transformation in steel |
1 |
| Spatially resolved acoustic spectroscopy towards online inspection of additive manufacturing |
1 |
| Gilded copper studied by non-destructive energy-dispersive X-ray fluorescence |
1 |
| Parameter optimisation of the pulsed eddy current probe for the detection of defects around the rivet in multi-layer structures |
1 |
| One sensor source localisation of acoustic emissions in thin plates using mode analysis |
1 |
| Robustness analysis of the FFT-based segmentation, feature selection and machine fault identification algorithm |
1 |
| Testing defects in automated ultrasonic testing and radiographic testing |
1 |
| Determination of the influence of post-heat treatment on the second phase of Al 2219-T6 alloy using the ultrasonic non-linear measurement technique |
1 |
| High-resolution imaging of flaws in copper finned-tube heat exchangers using the ultrasonic IRIS technique |
1 |
| Non-destructive measurement of artificial near-surface cracks for railhead inspection |
1 |
| Quantitative research into millimetre-scale debonding defects in wind turbine blade bonding structures using ultrasonic inspection: numerical simulations |
1 |
| Inversion of multi-layer structure parameters based on an electromagnetic/capacitive dual-mode sensor |
1 |
| Thickness determination of dual-layer coatings based on ultrasonic spectral filtering |
1 |
| SAFT processing for manually acquired ultrasonic measurement data with 3D smartInspect |
1 |
| Performance evaluation of capacitive imaging sensors with different geometries |
1 |
| Research on the time difference of arrival location method of an acoustic emission source based on visible graph modelling |
1 |
| Acceleration of eddy current computation for scanning probes |
1 |
| Early prediction of fracturing failure for bolted joints based on enhanced metal magnetic memory |
1 |
| Intelligent diagnosis of flip chip solder bumps using high-frequency ultrasound and a naive Bayes classifier |
1 |
| Thermal wave imaging for non-destructive testing and evaluation of reinforced concrete structures |
1 |
| Non-linear ultrasonic investigation of interface debonding of steel-concrete composites |
1 |
