| Technological performance of formaldehyde-free adhesive alternatives for particleboard industry |
24 |
| Mechanical properties and adhesive behavior of epoxy-graphene nanocomposites |
18 |
| Pressure sensitive adhesive property modification using cellulose nanocrystals |
18 |
| Single lap joints bonded with structural adhesives reinforced with a mixture of silica nanoparticles and multi walled carbon nanotubes |
17 |
| Surface treatment of CFRP: influence on single lap joint performances |
16 |
| High performance epoxy nanocomposite adhesive: Effect of nanofillers on adhesive strength, curing and degradation kinetics |
13 |
| Mechanical and fracture properties of epoxy adhesives modified with graphene nanoplatelets and rubber particles |
13 |
| Effects of various aluminum surface treatments on the basalt fiber metal laminates interlaminar adhesion |
12 |
| Cure and performance of castor oil polyurethane adhesive |
11 |
| UV-laser cleaning and surface characterization of an aerospace carbon fibre reinforced polymer |
11 |
| Failure behaviour of silicone adhesive in bonded connections with simple geometry |
11 |
| Partial replacement of urea-formaldehyde with modified oil palm starch based adhesive to fabricate particleboard |
11 |
| Experimental analysis of laser assisted joining of Al-Mg aluminium alloy with Polyetheretherketone (PEEK) |
11 |
| Experimental and numerical analysis of hybrid adhesively-bonded scarf joints |
11 |
| Durability of FRP - concrete bonded joints in structural rehabilitation: A review |
10 |
| Evaluation of surface treatments on 5052-H32 aluminum alloy for enhancing the interfacial adhesion of thermoplastic-based fiber metal laminates |
10 |
| The effect of laser ablation treatment on the chemistry, morphology and bonding strength of CFRP joints |
10 |
| Tannin-based adhesive cross-linked by furfuryl alcohol-glyoxal and epoxy resins |
10 |
| An experimental investigation of the fatigue damage behaviour of adhesively bonded joints under the combined effect of variable amplitude stress and temperature variation |
10 |
| Rods glued in engineered hardwood products part I: Experimental results under quasi-static loading |
10 |
| Synthesis and mechanical properties of bio-sourced polyurethane adhesives obtained from castor oil and MDI-modified cellulose acetate: Influence of cellulose acetate modification |
10 |
| Comparison between 2D and 3D applications of the coupled criterion to crack initiation prediction in scarf adhesive joints |
9 |
| Preparation and properties of a chitosan-lignin wood adhesive |
9 |
| The interfacial interaction between isocyanate and stainless steel |
9 |
| The effect of using anti-stripping additives on moisture damage of hot mix asphalt |
9 |
| Physical and mechanical properties of a reversible adhesive for automotive applications |
8 |
| Synthesis and characterization of lignin-polyurethane based wood adhesive |
8 |
| Wetting and adhesion properties of rhamnolipid and surfactin |
8 |
| Diazonium-modified zeolite fillers. Effect of diazonium substituent position on the filler surface modification and the mechanical properties of phenolic/zeolite composites |
8 |
| Development of bonded joints using novel CNT doped adhesive films: Mechanical and electrical properties |
8 |
| Lignin-based copolymer adhesives for composite wood panels - A review |
8 |
| Study on the effect of post curing on the mode II fracture energy of structural adhesive using a parameter identification approach |
7 |
| Design of laser-textured surfaces to enhance the strength of adhesively bonded joints |
7 |
| Structure and adhesion properties before and after hydrolytic ageing of polyurethane urea adhesives made with mixtures of waterborne polyurethane dispersions |
7 |
| Carbon nanotubes for enhanced interface of fiber metal laminate |
7 |
| Effect of the cohesive law shape on the modelling of adhesive joints bonded with brittle and ductile adhesives |
7 |
| Palm kernel meal as a melamine urea formaldehyde adhesive filler for plywood applications |
7 |
| Waterborne polyurethane-silica nanocomposite adhesives based on castor oil-recycled polyols: Effects of (3-aminopropyl)triethoxysilane (APTES) content on properties |
7 |
| Effects of applying a combination of surface treatments on the mechanical behavior of basalt fiber metal laminates |
7 |
| Single and dual adhesive bond strength analysis of single lap joint between dissimilar adherends |
7 |
| Joining of carbon fibre reinforced polymer to Al-Si alloy for space applications |
7 |
| Impedance analysis for condition monitoring of single lap CNT-epoxy adhesive joint |
7 |
| Numerical study of impact behaviour of mixed adhesive single lap joints for the automotive industry |
7 |
| Development and characterization of a new bio-adhesive for wood using cassava starch and bio-oil |
7 |
| Experimental and numerical investigation into strength of bolted, bonded and hybrid single lap joints: Effects of adherend material type and thickness |
7 |
| Experimental investigation of the effects of adhesive defects on the single lap joint strength |
7 |
| Improvement of aluminum lithium alloy adhesion performance based on sandblasting techniques |
7 |
| The applicability of J-integral approach in the determination of mixed-mode fracture energy in a ductile adhesive |
7 |
| Fatigue resistance of an aluminium one-component polyurethane adhesive joint for the automotive industry: Effect of surface roughness and adhesive thickness |
7 |
| Using the surface free energy (SFE) method to investigate the effects of additives on moisture susceptibility of asphalt mixtures |
6 |
