| Processing methods for making porous bioactive glass-based scaffolds-A state-of-the-art review |
18 |
| Bioactive sol-gel glasses: Processing, properties, and applications |
16 |
| Multisubstituted hydroxyapatite powders and coatings: The influence of the codoping on the hydroxyapatite performances |
14 |
| Fatigue of three advanced SiC/SiC ceramic matrix composites at 1200 degrees C in air and in steam |
12 |
| Functionally graded ceramics for biomedical application: Concept, manufacturing, and properties |
11 |
| Synthesis of modified catalyst and stabilization of CuO/NH4-ZSM-5 for conversion of methanol to gasoline |
11 |
| Apatite-forming ability, cytocompatibility, and mechanical properties enhancement of poly methyl methacrylate-based bone cements by incorporating of baghdadite nanoparticles |
9 |
| Characterization of vacuum-annealed TiNb2O7 as high potential anode material for lithium-ion battery |
9 |
| The effect of substrate temperature on microstructural evolution and hardenability of tungsten carbide coating in hot filament chemical vapor deposition |
8 |
| Microwave absorbing properties of a radar absorbing structure composed of carbon nanotube papers/glass fabric composites |
7 |
| Phase change and ferroelectric nature of microwave-heated lead cobalt titanate nanoparticles prepared by sol-gel method |
7 |
| Processing and properties of polycrystalline cubic boron nitride reinforced by SiC whiskers |
7 |
| Bone Regeneration in rat using a gelatin/bioactive glass nanocomposite scaffold along with endothelial cells (HUVECs) |
6 |
| Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen-printed thick films for application in humidity sensing |
6 |
| Preparation and properties of porous SiC-Al2O3 ceramics using coal ash |
6 |
| Effective reduction of sintering temperature and breakage ratio for a low-cost ceramic proppant by feldspar addition |
6 |
| The effect of agarose content on the morphology, phase evolution, and magnetic properties of CoFe2O4 nanoparticles prepared by sol-gel autocombustion method |
6 |
| Dielectric and piezoelectric performance of gadolinium-doped lead lanthanum zirconate titanate |
6 |
| Modeling matrix multicracking development of fiber-reinforced ceramic-matrix composites considering fiber debonding |
6 |
| Unfolding dielectric breakdown effects on energy storage performances of modified (Sr0.98Ca0.02)(Ti1-xZrx)O-3 ceramics |
6 |
| In situ synthesis and thermal shock resistance of a cordierite-mullite composite for solar thermal storage |
6 |
| Electrically conductive SiC ceramics processed by pressureless sintering |
6 |
| Ceramic membranes applied to membrane distillation: A comprehensive review |
6 |
| Novel processing approach to polymer-derived ceramic matrix composites |
6 |
| Low-temperature sintering of ceramic proppants by adding solid wastes |
6 |
| Preparation and heat-insulating properties of biomorphic ZrO2 hollow fibers derived from a cotton template |
5 |
| Pyroelectric performance of BaTi1-xSnxO3 ceramics |
5 |
| Magnetic and antimicrobial properties of cobalt-zinc ferrite nanoparticles synthesized by citrate-gel method |
5 |
| UV-visible absorption and photoluminescence characteristics of SnO2 nano-tube/wire arrays fabricated by LPD method |
5 |
| A study on the effect of presence of CeO2 and benzotriazole on activation of self-healing mechanism in ZrO2 ceramic-based coating |
5 |
| Synthesis and adsorption properties of nanocrystalline ferrites for kinetic modeling development |
5 |
| Silicon nitride bioceramics in healthcare |
5 |
| A facile route for the preparation of silica foams using rice husk ash |
5 |
| Effect of agro-waste pore formers on the microstructure, hardness, and tensile properties of porous alumina ceramics |
5 |
| Optimization thermophysical properties of TiO2 alloying Sm3TaO7 ceramics as promising thermal barrier coatings |
5 |
| Effect of apple cider vinegar agent on the microstructure, phase evolution, and magnetic properties of CoFe2O4 magnetic nanoparticles |
5 |
| Effect of sub-layer temperature during HFCVD process on morphology and corrosion behavior of tungsten carbide coating |
5 |
| Synthesis of high surface area mesoporous silica SBA-15 for hydrogen storage application |
5 |
| Interlaboratory round robin study on axial tensile properties of SiC-SiC CMC tubular test specimens |
5 |
| The use of bagasse in the preparation of fireclay insulating bricks |
5 |
| Tetragonality enhancement in BaTiO3 by mechanical activation of the starting BaCO3 and TiO2 powders: Characterization of the contribution of the mechanical activation and postmilling calcination phenomena |
5 |
| Design and characterization of novel glass-ceramic sealants for solid oxide electrolysis cell (SOEC) applications |
5 |
| Study on the sintering behavior and characterization of the IGZO ceramics by slip casting |
5 |
| Fabric impregnated with TiO2 gel with self-cleaning property |
5 |
| Preparation and corrosion behavior studies of chemically bonded phosphate ceramic coating reinforced with modified multi-walled carbon nanotubes (MWCNTs) |
4 |
| Formation of Ti3SiC2 interphase coating on SiCf/SiC composite by electrophoretic deposition |
4 |
| A Ba-free sealing glass with a high coefficient of thermal expansion and excellent interface stability optimized for SOFC/SOEC stack applications |
4 |
| Pressure slip casting of coarse-grained alumina-carbon materials |
4 |
| P2O5-Fe2O3-CaO-SiO2 ferromagnetic glass-ceramics for hyperthermia |
4 |
| Morphological characterization of aluminum-doped zinc oxide nanomaterials (AZO) for dye-sensitized solar cells |
4 |
