| Influence of defects, surface roughness and HIP on the fatigue strength of Ti-6Al-4V manufactured by additive manufacturing |
49 |
| Influence of solution treatment on the corrosion fatigue behavior of an as forged Mg-Zn-Y-Zr alloy |
48 |
| Deformation characteristics of sandstones during cyclic loading and unloading with varying lower limits of stress under different confining pressures |
45 |
| Probabilistic modeling of fatigue life distribution and size effect of components with random defects |
32 |
| A review on the fatigue behavior of Ti-6Al-4V fabricated by electron beam melting additive manufacturing |
30 |
| Surface roughness effects on the fatigue strength of additively manufactured Ti-6Al-4V |
28 |
| Fatigue characteristics of steels manufactured by selective laser melting |
24 |
| Low- and high-cycle fatigue resistance of Ti-6Al-4V ELI additively manufactured via selective laser melting: Mean stress and defect sensitivity |
23 |
| Probabilistic modelling of notch fatigue and size effect of components using highly stressed volume approach |
22 |
| Strain energy gradient-based LCF life prediction of turbine discs using critical distance concept |
21 |
| Defect analysis and fatigue design basis for Ni-based superalloy 718 manufactured by selective laser melting |
20 |
| Critical distance approach for the fatigue strength assessment of magnesium welded joints in contrast to Neuber's effective stress method |
20 |
| An analysis of defects influence on axial fatigue strength of maraging steel specimens produced by additive manufacturing |
20 |
| Effect of build orientation on the fatigue properties of as-built Electron Beam Melted Ti-6Al-4V alloy |
20 |
| Fatigue properties of AlSi10Mg produced by Additive Layer Manufacturing |
19 |
| Significance of hot isostatic pressing (HIP) on multiaxial deformation and fatigue behaviors of additive manufactured Ti-6A1-4V including build orientation and surface roughness effects |
19 |
| Energy field intensity approach for notch fatigue analysis |
19 |
| A combined CP theory and TCD for predicting fatigue lifetime in single-crystal superalloy plates with film cooling holes |
18 |
| Cyclic deformation and fatigue behavior of additively manufactured 17-4 PH stainless steel |
18 |
| Improving the fretting and corrosion fatigue performance of 300M ultra-high strength steel using the ultrasonic surface rolling process |
18 |
| The influence of additive manufacturing processing parameters on surface roughness and fatigue life |
18 |
| Investigation of the mechanisms by which hot isostatic pressing improves the fatigue performance of powder bed fused Ti-6Al-4V |
18 |
| Prediction of material fatigue parameters for low alloy forged steels considering error circle |
18 |
| Evaluation and comparison of critical plane criteria for multiaxial fatigue analysis of ductile and brittle materials |
18 |
| Surface characteristics and fatigue behavior of shot peened Inconel 718 |
18 |
| Probabilistic fatigue assessment for high-speed railway axles due to foreign object damages |
18 |
| Numerical modelling of surface roughness effect on the fatigue behavior of Ti-6Al-4V obtained by additive manufacturing |
17 |
| Low-cycle fatigue characterization and texture induced ratcheting behaviour of forged AZ80 Mg alloys |
16 |
| Notch-defect interaction in additively manufactured Inconel 718 |
16 |
| Fatigue crack growth in a laser shock peened residual stress field |
16 |
| Experimental and numerical investigation of mixed mode I plus II and I plus III fatigue crack growth in S355J0 steel |
16 |
| Investigation of the effect of porosity on the high cycle fatigue behaviour of cast Al-Si alloy by X-ray micro-tomography |
15 |
| An experimental investigation on the shear mechanism of fatigue damage in rock joints under pre-peak cyclic loading condition |
15 |
| Fatigue life of a dissimilar welded joint considering the weld residual stress: Experimental and finite element simulation |
15 |
| Effect of post-treatments on the fatigue behaviour of 316L stainless steel manufactured by laser powder bed fusion |
15 |
| Fatigue evaluation for high-speed railway axles with surface scratch |
15 |
| Surface roughness and directional fatigue behavior of as-built EBM and DMLS Ti6Al4V |
15 |
| An efficient online time-temperature-dependent creep-fatigue rainflow counting algorithm |
15 |
| Effect of heat treatments on fatigue property of selective laser melting AlSi10Mg |
15 |
| Nonlinear fatigue damage accumulation: Isodamage curve-based model and life prediction aspects |
15 |
| A new model for fatigue life prediction based on infrared thermography and degradation process for CFRP composite laminates |
14 |
| Fatigue properties and material characteristics of additively manufactured AlSiW10Mg-Effect of the contour parameter on the microstructure, density, residual stress, roughness and mechanical properties |
14 |
| Fatigue behavior of additively manufactured 17-4 PH stainless steel: Synergistic effects of surface roughness and heat treatment |
14 |
| On the effect of geometrical imperfections and defects on the fatigue strength of cellular lattice structures additively manufactured via Selective Laser Melting |
14 |
| Criticality of porosity defects on the fatigue performance of wire plus arc additive manufactured titanium alloy |
14 |
| Fatigue performances of FSW and GMAW aluminum alloys welded joints: Competition between microstructural and structural-contact-fretting crack initiation |
14 |
| Multiaxial cyclic behaviour of extruded and forged AZ80 Mg alloy |
14 |
| Comparison of TCD and SED methods in fatigue lifetime assessment |
14 |
| Probabilistic LCF life assessment for turbine discs with DC strategy-based wavelet neural network regression |
14 |
| Experimental determination and sensitivity analysis of the fatigue critical distance obtained with rounded V-notched specimens |
13 |
