| Role of nano-additive blended biodiesel on emission characteristics of the research diesel engine |
22 |
| Performance evaluation and emission characteristics of biodiesel-ignition enhancer blends propelled in a research diesel engine |
22 |
| Analysis of emission reduction in ethyne-biodiesel-aspirated diesel engine |
16 |
| Review: recent advances in biogas purifying technologies |
15 |
| Emission study of a diesel engine fueled with higher alcohol-biodiesel blended fuels |
13 |
| Application of response surface methodology for the optimization of biodiesel production from yellow mustard (Sinapis alba L.) seed oil |
13 |
| A novel framework-based cuckoo search algorithm for sizing and optimization of grid-independent hybrid renewable energy systems |
13 |
| Electricity consumption and economic growth nexus in Zimbabwe revisited: fresh evidence from Maki cointegration |
11 |
| Evaluating removal of tar contents in syngas produced from downdraft biomass gasification system |
9 |
| Investigating the environmental Kuznets Curve and the role of green energy: Emerging and developed markets |
9 |
| A comprehensive review of geothermal energy evolution and development |
8 |
| Electrochemical NOx reduction and oxidation of HC and PM emissions from biodiesel fuelled diesel engines using electrochemically activated cell |
8 |
| Intelligent control and energy efficiency analysis of the multi-functional freezing and refrigerated storage system |
8 |
| Hybrid power supply solutions for off-grid green wireless networks |
7 |
| Hydro-abrasive erosion in hydro turbines: a review |
7 |
| The renewable energy consumption by sectors and household income growth in the United States |
6 |
| Effect of different design aspects of pipe for earth air tunnel heat exchanger system: A state of art |
6 |
| Development of activated carbon from Nerium oleander flower and their rapid adsorption of direct and reactive dyes |
6 |
| Environmental Kuznets Curve hypothesis for Pakistan: Empirical evidence form ARDL bound testing and causality approach |
6 |
| An optimization of energy cost of clean hybrid solar-wind power plants in Iran |
6 |
| Experimental investigations on the influence of hydrogen and LPG mixtures on performance behavior of a mahua bio oil-powered dual fuel engine |
6 |
| Investigation of the effects of battery types and power management algorithms on drive cycle simulation for a range-extended electric vehicle powertrain |
6 |
| Higher-efficiency for combined photovoltaic-thermoelectric solar power generation |
6 |
| Bioelectricity generation from three ornamental plants: Chlorophytum comosum, Chasmanthe floribunda and Papyrus diffusus |
6 |
| Performance evaluation of Nahar oil-diesel blends in a single cylinder direct injection diesel engine |
6 |
| Optimal sizing and siting of renewable energy resources in distribution systems considering time varying electrical/heating/cooling loads using PSO algorithm |
6 |
| Experimental investigation of performance and emission characteristics of diesel engine using Jatropha biodiesel with alumina nanoparticles |
6 |
| Comparative corrosion characteristics of automotive materials in Jatropha biodiesel |
5 |
| Experimental and numerical analysis of a helical coil solar cavity receiver: Thermal oil as the heat transfer fluid |
5 |
| Effect of air supply on the performance of an active direct methanol fuel cell (DMFC) fed with neat methanol |
5 |
| A nanocomposite of CoFe2O4-carbon microspheres for electrochemical energy storage applications |
5 |
| Ignition advancement study for optimized characteristics of a raw biogas operated spark ignition engine |
5 |
| Assessment of biomass and lipid productivity and biodiesel quality of an indigenous microalga Chlorella sorokiniana MIC-G5 |
5 |
| Degradation characteristics of membrane electrode assembly under drive cycle test protocol |
5 |
| An investigation on CI engine characteristics using pork lard methyl ester at various injection pressures and injection timings |
5 |
| Energy and exergy analysis of a solid-oxide fuel cell power generation system for an aerial vehicle (ISSA-2015-139) |
4 |
| Thermal Modeling and Performance Evaluation of Photovoltaic Thermal (PV/T) Systems: A Parametric Study |
4 |
| Impact of various blends of Mimusops elengi methyl esters on performance and emission characteristics of a diesel engine |
4 |
| Dynamic temperature model for proton exchange membrane fuel cell using online variations in load current and ambient temperature |
4 |
| Dynamic contact angle effects on gas-liquid behaviors in the cathode of proton exchange membrane fuel cell with stirred tank reactor design |
4 |
| LCA-Based Economic Benefit Analysis for Building Integrated Photovoltaic (BIPV) Facades: A Case Study in Taiwan |
4 |
| Investigating the influence of Thomson effect on the performance of a thermoelectric generator in a waste heat recovery system |
4 |
| Global status of wind power generation: theory, practice, and challenges |
4 |
| Numerical and experimental study on a modified Savonius rotor with guide blades |
4 |
| Enzymatic hydrolysis of banana stems (Musa acuminata): Optimization of process parameters and inhibition characterization |
4 |
| Implementation of surface modified carbon cloth electrodes with biochar particles in microbial fuel cells |
4 |
| Combined steam-dry reforming of toluene in syngas over CaNiRu/Al2O3 catalysts |
4 |
| Renewable biofuel production from biomass: a review for biomass pelletization, characterization, and thermal conversion techniques |
4 |
| Modeling, simulation, and performance analysis of PV array configurations (Series, Series-Parallel, Bridge-Linked, and Honey-Comb) to harvest maximum power under various Partial Shading Conditions |
4 |
| Prediction of dissolved gases content in power transformer oil using BASA-based mixed kernel RVR model |
3 |
