| Cementitious property of NaAlO2-activated Ge slag as cement supplement |
16 |
| An analytical solution for evaluating the safety of an exposed face in a paste backfill stope incorporating the arching phenomenon |
16 |
| Experimental study on dynamic mechanical property of cemented tailings backfill under SHPB impact loading |
14 |
| Roasting and leaching behaviors of vanadium and chromium in calcification roasting-acid leaching of high-chromium vanadium slag |
12 |
| Effect of sodium alginate on reverse flotation of hematite and its mechanism |
11 |
| Preparation and electrochemical performance of double perovskite La2CoMnO6 nanofibers |
11 |
| Microstructure and mechanical properties of friction-stir welded St52 steel joints |
9 |
| Effects of Na2SO4 on iron and nickel reduction in a high-iron and low-nickel laterite ore |
9 |
| Investigation of the medium calcium based non-burnt brick made by red mud and fly ash: durability and hydration characteristics |
8 |
| Effect of Ni on the corrosion resistance of bridge steel in a simulated hot and humid coastal-industrial atmosphere |
8 |
| Review on nanocomposites fabricated by mechanical alloying |
8 |
| Preparation of nano-TiO2/diatomite-based porous ceramics and their photocatalytic kinetics for formaldehyde degradation |
8 |
| Graphene-immobilized flower-like Ni3S2 nanoflakes as a stable binder-free anode material for sodium-ion batteries |
8 |
| Effect of reductant type on the embedding direct reduction of beach titanomagnetite concentrate |
8 |
| Anisotropy in mechanical properties and corrosion resistance of 316L stainless steel fabricated by selective laser melting |
8 |
| Microstructure and mechanical properties of Al/Cu/Mg laminated composite sheets produced by the ARB proces |
8 |
| Propagation patterns of microseismic waves in rock strata during mining: an experimental study |
7 |
| Effect of cold rolling on the microstructural, magnetic, mechanical, and corrosion properties of AISI 316L austenitic stainless steel |
7 |
| Direct electrochemical reduction of copper sulfide in molten borax |
6 |
| Mechanical and corrosion properties of low-carbon steel prepared by friction stir processing |
6 |
| Comparison between the surface defects caused by Al2O3 and TiN inclusions in interstitial-free steel auto sheets |
6 |
| Reaction kinetics modeling for lithium and cobalt recovery from spent lithium-ion batteries using acetic acid |
6 |
| Flotation mechanisms of molybdenite fines by neutral oils |
6 |
| Effect of TiO2 nanoparticles on hydrogen evolution reaction activity of Ni coatings |
6 |
| Fabrication of homogeneously dispersed graphene/Al composites by solution mixing and powder metallurgy |
6 |
| Effects of smelting parameters on the slag/metal separation behaviors of Hongge vanadium-bearing titanomagnetite metallized pellets obtained from the gas-based direct reduction process |
6 |
| One-step electrochemical reduction of stibnite concentrate in molten borax |
6 |
| Effects of Zn content on the microstructure and the mechanical and corrosion properties of as-cast low-alloyed Mg-Zn-Ca alloys |
6 |
| Enhancement of thermal stability and UV resistance of halloysite nanotubes using zinc oxide functionalization via a solvent-free approach |
6 |
| Photocatalytic degradation of methylene blue by nanostructured Fe/FeS powder under visible light |
6 |
| Process mineralogy characteristics of acid leaching residue produced in low-temperature roasting-acid leaching pretreatment process of refractory gold concentrates |
5 |
| Influence of microwave treatment on grinding and dissociation characteristics of vanadium titano-magnetite |
5 |
| Microstructure and properties of Ag-Ti3SiC2 contact materials prepared by pressureless sintering |
5 |
| A method for recovery of iron, titanium, and vanadium from vanadium-bearing titanomagnetite |
5 |
| Solid-phase synthesis of Cu2MoS4 nanoparticles for degradation of methyl blue under a halogen-tungsten lamp |
5 |
| Influence of metallurgical processing parameters on defects in cold-rolled steel sheet caused by inclusions |
5 |
| Analysis of the formation conditions and characteristics of interphase and random vanadium precipitation in a low-carbon steel during isothermal heat treatment |
5 |
| Microstructure and mechanical properties of SiC-particle-strengthening tri-metal Al/Cu/Ni composite produced by accumulative roll bonding process |
5 |
| Investigating the mechanical and acoustic emission characteristics of brittle failure around a circular opening under uniaxial loading |
5 |
| Microstructure, mechanical, and corrosion properties of extruded low-alloyed Mg-xZn-0.2Ca alloys |
5 |
| Recovery of vanadium and molybdenum from spent petrochemical catalyst by microwave-assisted leaching |
5 |
| Effect of CO2 and H2O on gasification dissolution and deep reaction of coke |
5 |
| Sintering study of Ti6Al4V powders with different particle sizes and their mechanical properties |
4 |
| Ordering and disordering of in situ grown MgAl-layered double hydroxide and its effect on the structural and corrosion resistance properties |
4 |
| New high-strength Ti-Al-V-Mo alloy: from high-throughput composition design to mechanical properties |
4 |
| Linking leach chemistry and microbiology of low-grade copper ore bioleaching at different temperatures |
4 |
| Enhancement of the nickel converter slag-cleaning operation with the addition of spent potlining |
4 |
| Leaching behavior of V, Pb, Cd, Cr, and As from stone coal waste rock with different particle sizes |
4 |
| Azo dye degradation behavior of AlFeMnTiM (M = Cr, Co, Ni) high-entropy alloys |
4 |
| Relationship among the secretion of extracellular polymeric substances, heat resistance, and bioleaching ability of Metallosphaera sedula |
4 |
