| Field performance of top-down fatigue cracking for warm mix asphalt pavements |
44 |
| Effects of material characteristics on asphalt and filler interaction ability |
21 |
| Using the visual intervention influence of pavement markings for rutting mitigation-part I: preliminary experiments and field tests |
19 |
| Evaluation of low temperature viscoelastic properties and fracture behavior of bio-asphalt mixtures |
16 |
| Using the visual intervention influence of pavement marking for rutting mitigation - Part II: visual intervention timing based on the finite element simulation |
16 |
| The search for a measure of fatigue cracking in asphalt binders - a review of different approaches |
14 |
| An adaptive hybrid genetic algorithm for pavement management |
12 |
| Development of ANN-GA program for backcalculation of pavement moduli under FWD testing with viscoelastic and nonlinear parameters |
12 |
| Characterising the asphalt concrete fracture performance from X-ray CT Imaging and finite element modelling |
12 |
| Experimental simulation of rapid clogging process of pervious concrete pavement caused by storm water runoff |
11 |
| Evaluation of asphalt-aggregate interaction based on the rheological properties |
11 |
| Effect of copper slag on performance of warm mix asphalt |
11 |
| Nanomechanistic properties of reclaimed asphalt pavement modified asphalt binders using an atomic force microscope |
10 |
| Rigid pavement performance models by means of Markov Chains with half-year step time |
10 |
| Feasibility study of ECC with self-healing capacity applied on the long-span steel bridge deck overlay |
10 |
| Long-term durability of epoxy-modified open-graded porous asphalt wearing course |
10 |
| Statistical evaluation of factors affecting the laboratory rutting susceptibility of asphalt mixtures |
10 |
| A laboratory procedure for predicting skid and polishing resistance of road surfaces |
9 |
| Performance of porous asphalt mixture with various additives |
9 |
| Permeable pavement in northern North American urban areas: research review and knowledge gaps |
9 |
| Development of a pseudo strain energy-based fatigue failure criterion for asphalt mixtures |
9 |
| Effects of thermally modified asphalt concrete on pavement temperature |
8 |
| Performance evaluation of rubberised asphalt mixes containing WMA additives |
8 |
| Thermo-oxidative aging of bitumen |
8 |
| Investigation on interface stripping damage at high-temperature using microstructural analysis |
8 |
| A sulphonated oil for stabilisation of expansive soils |
8 |
| Prediction of pavement fatigue cracking at an accelerated testing section using asphalt mixture performance tests |
8 |
| Viscoelastic continuum damage (VECD) models for cracking problems in asphalt mixtures |
8 |
| Influence of high content of reclaimed asphalt on the mechanical properties of cement-treated base under critical environmental conditions |
7 |
| An application of Markov chains to predict the evolution of performance indicators based on pavement historical data |
7 |
| Investigation into physical and mechanical properties of SRX-stabilised crushed rock using different compaction methods |
7 |
| Investigating the indirect tensile stiffness, toughness and fatigue life of hot mix asphalt containing copper slag powder |
7 |
| Kinetics-based aging prediction of asphalt mixtures using field deflection data |
7 |
| Contribution to pavement friction modelling: an introduction of the wetting effect |
6 |
| Mechanical properties and strength criteria of cement-stabilised recycled concrete aggregate |
6 |
| 3D FEM analysis of flexible base asphalt pavement structure under non-uniform tyre contact pressure |
6 |
| Bio-modification of rubberised asphalt binder to enhance its performance |
6 |
| Large-scale direct shear testing of geogrid-reinforced aggregate base over weak subgrade |
6 |
| Three-dimensional discrete element modelling of influence factors of indirect tensile strength of asphalt mixtures |
6 |
| Contextual heat island assessment for pavement preservation |
6 |
| Study on durability of high-modulus asphalt mixture based on TLA and fibre composite modification technology |
6 |
| Development of the pavement structural health index based on falling weight deflectometer testing |
6 |
| Evaluation on compactibility and workability of roller-compacted concrete for pavement |
6 |
| Field evaluation and analysis of road subgrade dynamic responses under heavy duty vehicle |
6 |
| Application of FTIR spectroscopy with solvent-cast film and PLS regression for the quantification of SBS content in modified asphalt |
6 |
| Terrestrial laser scanner for the analysis of airport pavement geometry |
6 |
| Continuous strain monitoring of an instrumented pavement section |
6 |
| Pavement performance follow-up and evaluation of polymer-modified test sections |
6 |
| Application of coal waste in sustainable roller compacted concrete pavement-environmental and technical assessment |
6 |
| Application of nano-silica and styrene-butadiene-styrene to improve asphalt mixture self healing |
5 |
