| Towards a greater understanding of serrated flows in an Al-containing high-entropy-based alloy |
34 |
| Probing the phase transformation and dislocation evolution in dual-phase high-entropy alloys |
28 |
| Strength and ductility of CrFeCoNiMo alloy with hierarchical microstructures |
28 |
| An integrated crystal plasticity-phase field model for spatially resolved twin nucleation, propagation, and growth in hexagonal materials |
27 |
| Anisotropic yield function based on stress invariants for BCC and FCC metals and its extension to ductile fracture criterion |
26 |
| Modeling of continuous dynamic recrystallization of Al-Zn-Cu-Mg alloy during hot deformation based on the internal-state-variable (ISV) method |
24 |
| Simultaneously enhancing strength and ductility of a high-entropy alloy via gradient hierarchical microstructures |
22 |
| Is stored energy density the primary meso-scale mechanistic driver for fatigue crack nucleation? |
22 |
| Improving ductility of a Mg alloy via non-basal < a > slip induced by Ca addition |
20 |
| Tensile properties, strain rate sensitivity, and activation volume of additively manufactured 316L stainless steels |
20 |
| Slip transfer and deformation structures resulting from the low cycle fatigue of near-alpha titanium alloy Ti-6242Si |
20 |
| Study of microstructural grain and geometric size effects on plastic heterogeneities at grain-level by using crystal plasticity modeling with high-fidelity representative microstructures |
19 |
| On the characteristics of Portevin-Le Chatelier bands in cold-rolled 7Mn steel showing transformation induced plasticity |
19 |
| An elastoplastic model for saturated freezing soils based on thermo-poromechanics |
18 |
| Beyond the strain recoverability of martensitic transformation in NiTi |
18 |
| Thermodynamically consistent and scale-dependent phase field approach for crack propagation allowing for surface stresses |
18 |
| Realizing strength-ductility combination of coarse-grained Al0.2Co1.5CrFeNi1.5Ti0.3 alloy via nano-sized, coherent precipitates |
18 |
| Hydrogen embrittlement controlled by reaction of dislocation with grain boundary in alpha-iron |
18 |
| Mechanical response, twinning, and texture evolution of WE43 magnesium-rare earth alloy as a function of strain rate: Experiments and multi-level crystal plasticity modeling |
17 |
| Structural representation of additively manufactured 316L austenitic stainless steel |
17 |
| Deformation and failure of lithium-ion batteries treated as a discrete layered structure |
17 |
| Modulating heterogeneity and plasticity in bulk metallic glasses: Role of interfaces on shear banding |
17 |
| Latent hardening within the elasto-plastic self-consistent polycrystal homogenization to enable the prediction of anisotropy of AA6022-T4 sheets |
16 |
| Strain gradient continuum plasticity theories: Theoretical, numerical and experimental investigations |
16 |
| Strain-rate dependent deformation mechanism of graphene-Al nanolaminated composites studied using micro-pillar compression |
16 |
| Influence of local stresses on motion of edge dislocation in aluminum |
15 |
| A micro-mechanics based plastic damage model for quasi-brittle materials under a large range of compressive stress |
15 |
| Superb strength and high plasticity in laves phase rich eutectic medium-entropy-alloy nanocomposites |
15 |
| Phase field approach for stress- and temperature-induced phase transformations that satisfies lattice instability conditions. Part I. General theory |
15 |
| Precipitation hardening effects on extension twinning in magnesium alloys |
15 |
| Cyclic plasticity experiments and polycrystal plasticity modeling of three distinct Ti alloy microstructures |
15 |
| Dislocation mechanism based size-dependent crystal plasticity modeling and simulation of gradient nano-grained copper |
14 |
| Slip transfer across phase boundaries in dual phase titanium alloys and the effect on strain rate sensitivity |
14 |
| Fractional order plasticity modelling of state-dependent behaviour of granular soils without using plastic potential |
14 |
| A thermodynamically-based viscoelastic-viscoplastic model for the high temperature cyclic behaviour of 9-12% Cr steels |
14 |
| Micromechanical modeling on thermomechanical coupling of cyclically deformed superelastic NiTi shape memory alloy |
14 |
| Temperature dependent strain hardening and fracture behavior of TWIP steel |
13 |
| Hierarchical multiscale modeling of plasticity in copper: From single crystals to polycrystalline aggregates |
13 |
| On the plastic deformation accompanying cyclic martensitic transformation in thermomechanically loaded NiTi |
13 |
| Microstructural and micromechanical evolution during dynamic recrystallization |
13 |
| Evolution of twinning systems and variants during sequential twinning in cryo-rolled titanium |
13 |
| Strengthening and deformation mechanisms in nanolaminated graphene-Al composite micro-pillars affected by graphene in-plane sizes |
13 |
| The dislocation behaviour and GND development in a nickel based superalloy during creep |
13 |
| A micromechanical constitutive model for grain size dependent thermo-mechanically coupled inelastic deformation of super-elastic NiTi shape memory alloy |
12 |
| Quantitative investigation of micro slip and localization in polycrystalline materials under uniaxial tension |
12 |
| Effects of grain refinement on the quasi-static compressive behavior of AISI 321 austenitic stainless steel: EBSD, TEM, and XRD studies |
12 |
| Experimental analysis and constitutive modelling of cyclic behaviour of 316L steels including hardening/softening and strain range memory effect in LCF regime |
12 |
| Strain rate sensitivities of deformation mechanisms in magnesium alloys |
12 |
| A polycrystal plasticity based thermo-mechanical-dynamic recrystallization coupled modeling method and its application to light weight alloys |
12 |
| Machine-learning based temperature- and rate-dependent plasticity model: Application to analysis of fracture experiments on DP steel |
12 |
