| Vision-Based Defect Detection for Mobile Phone Cover Glass using Deep Neural Networks |
13 |
| The experimental research on gear eccentricity error of backlash-compensation gear device based on transmission error |
13 |
| Topology Optimization and Additive Manufacturing of Customized Sports Item Considering Orthotropic Anisotropy |
11 |
| Design and testing of a new 3-DOF spatial flexure parallel micropositioning stage |
9 |
| A Review of Thickness Measurements of Thick Transparent Layers Using Optical Interferometry |
8 |
| Fuzzy Adaptive Sliding Mode Control for the Precision Position of Piezo-Actuated Nano Positioning Stage |
8 |
| Design and Test of the MEMS Coupled Piezoelectric-Electromagnetic Energy Harvester |
8 |
| Review of Soft Actuator Materials |
8 |
| An Investigation on the Motion Error of Machine Tools' Hexapod Table |
8 |
| Effects of Vibration on Microstructure and Thermal Properties of Friction Stir Spot Welded (FSSW) Aluminum Alloy (Al5083) |
8 |
| Non-pulsed Energy Modeling Based on Energy Consumption Subunits in Wire Electrical Discharge Machining (WEDM) Process |
7 |
| Effects of Electrode and Workpiece Materials on the Sustainability of Micro-EDM Drilling Process |
7 |
| Environment Friendly Machining of Inconel 625 under Nano-Fluid Minimum Quantity Lubrication (NMQL) |
7 |
| Seals Based on Magnetic Fluids for High Precision Spindles of Machine Tools |
7 |
| A Study on Cutting Characteristics in Turning Operations of Titanium Alloy used in Automobile |
7 |
| Study on Robust Lateral Controller for Differential GPS-Based Autonomous Vehicles |
7 |
| Experimental Investigation of Dynamic Errors in Coordinate Measuring Machines for High Speed Measurement |
7 |
| Robotic Machining: A Review of Recent Progress |
7 |
| Numerical analysis for controlling residual stresses in welding design of dissimilar materials girth joints |
7 |
| Damping controller design for nanopositioners: A hybrid reference model matching and virtual reference feedback tuning approach |
6 |
| A robust time-delay nonlinear controller for a pneumatic artificial muscle |
6 |
| Extended High Gain Observer-Based Sliding Mode Control for an Electro-hydraulic System with a Variant Payload |
6 |
| Aggregated Hierarchical Sliding Mode Control for a Spatial Ridable Ballbot |
6 |
| Optimal Design of Thickness and Young's Modulus of Multi-Layered Foldable Structure Considering Bending Stress, Neutral Plane and Delamination under 2.5 mm Radius of Curvature |
6 |
| A 3D Printed Paper-Based Thermally Driven Soft Robotic Gripper Inspired by Cabbage |
6 |
| Drop-on-Demand Electrohydrodynamic Printing of High Resolution Conductive Micro Patterns for MEMS Repairing |
6 |
| Dynamic Posture Stabilization of a Biped Robot SUBO-1 on Slope-Changing Grounds |
6 |
| Optimal On-Machine Measurement of Position-Independent Geometric Errors for Rotary Axes in Five-Axis Machines with a Universal Head |
6 |
| Optimization of Cutting Parameters for Minimizing Environmental Impact: Considering Energy Efficiency, Noise Emission and Economic Dimension |
6 |
| Effects of Nickel Additive on Micro-Arc Oxidation Coating of AZ63B Magnesium Alloy |
5 |
| Inverse Analysis of Inconel 718 Laser-Assisted Milling to Achieve Machined Surface Roughness |
5 |
| A Comparative Study of AA6351 Mono-Composites Reinforced with Synthetic and Agro Waste Reinforcement |
5 |
| A Model Prediction Control Design for Inverse Multiplicative Structure Based Feedforward Hysteresis Compensation of a Piezo Nanopositioning Stage |
5 |
| The Mixed Kernel Function SVM-Based Point Cloud Classification |
5 |
| The Development of Gelatin-Based Bio-Ink for Use in 3D Hybrid Bioprinting |
5 |
| A Comparative Study of Non-destructive Evaluation of Glass Fiber Reinforced Polymer Composites Using Terahertz, X-ray, and Ultrasound Imaging |
5 |
| Touch Probe Tip Compensation Using a Novel Transformation Algorithm for Coordinate Measurements of Curved Surfaces |
5 |
| Impact Attenuation of the Soft Pads and the Wearable Airbag for the Hip Protection in the Elderly |
5 |
| Steering Performance Evaluation of Active Steering System for a Railway Vehicle by Simulating Real Track Running |
5 |
| Kriging Model Based Optimization of MacPherson Strut Suspension for Minimizing Side Load using Flexible Multi-Body Dynamics |
5 |
| Multi-objective Optimization in Drilling Kevlar Fiber Reinforced Polymer Using Grey Fuzzy Analysis and Backpropagation Neural Network-Genetic Algorithm (BPNN-GA) Approaches |
5 |
| Convolutional Neural Network Based Surface Inspection System for Non-patterned Welding Defects |
5 |
| FE Modeling and Experimental Analysis of Residual Stresses in Vibration Assisted Turning of Ti6Al4V |
5 |
| Effect of fabrication parameters on surface roughness of FDM parts |
5 |
| Trajectory Planning with Minimum Synthesis Error for Industrial Robots Using Screw Theory |
5 |
| Post-processing of Laser Additive Manufactured Inconel 718 Using Laser Shock Peening |
5 |
| Microchannel Fabrication on Glass Materials for Microfluidic Devices |
5 |
| Tool edge radius wear and material removal rate performance charts for titanium micro-milling |
5 |
| Dual NURBS Path Smoothing for 5-Axis Linear Path of Flank Milling |
4 |
| Design and Optimization of a New Compliant Rotary Positioning Stage with Constant Output Torque |
4 |
