| A new analytical method of strain and deformation of pipeline under fault movement |
10 |
| Stress corrosion cracking and fatigue crack growth of an API 5L X70 welded joint in an ethanol environment |
10 |
| Effect of hydrodynamics on the flow accelerated corrosion (FAC) and electrochemical impedance behavior of line pipe steel for petroleum industry |
9 |
| Effect of helix angle on residual stress in the spiral welded oil pipelines: Experimental and finite element modeling |
9 |
| Grain refinement mechanisms and strength-hardness correlation of ultrafine grained grade 91 steel processed by equal channel angular extrusion |
9 |
| Microstructure and impact toughness of reheated coarse grain heat affected zones of API X65 and API X80 linepipe steels |
9 |
| A Fuzzy Logic method: Predicting pipeline external corrosion rate |
9 |
| Residual stress in pipeline girth welds- A review of recent data and modelling |
9 |
| Nonlinear vibration characteristics of shear deformable functionally graded curved panels with porosity including temperature effects |
8 |
| Thermal, metallurgical and mechanical analysis of circumferentially multi-pass welded P92 steel pipes |
8 |
| Compound technique-based inline design strategy for water-hammer control in steel pressurized-piping systems |
8 |
| Ratcheting behavior of pressurized-bending elbow pipe after thermal aging |
8 |
| Analysis of compression and transport of the methane/hydrogen mixture in existing natural gas pipelines |
8 |
| Experimental and numerical studies on the buckling of the hemispherical shells made of maraging steel subjected to extremely high external pressure |
7 |
| Resonance analyses of a pipeline-riser system conveying gas-liquid two-phase flow with flow-pattern evolution |
7 |
| Effects of hydrogen on the fracture toughness of 42CrMo4 steel quenched and tempered at different temperatures |
7 |
| Influence of filler metals and PWHT regime on the microstructure and mechanical property relationships of CSEF steels dissimilar welded joints |
7 |
| Design functionally graded rotating disks under thermoelastic loads: Weight optimization |
6 |
| Further investigation on the water-hammer control branching strategy in pressurized steel-piping systems |
6 |
| Assessment of yield strength mismatch in X80 pipeline steel welds using instrumented indentation |
6 |
| Evaluation of the thermal ageing of austenitic stainless steel welds with 10% of delta-ferrites |
6 |
| Bayesian Network inference for probabilistic strength estimation of aging pipeline systems |
6 |
| The effect of temperature, CO H2S gases and the resultant iron carbonate and iron sulfide compounds on the sour corrosion behaviour of ASTM A-106 steel for pipeline transportation |
6 |
| Investigating optimal cutting configurations for the contour method of weld residual stress measurement |
6 |
| Reliability assessment of thick high strength pipelines with corrosion defects |
5 |
| Application of the GTN model to ductile crack growth simulation in through-wall cracked pipes |
5 |
| Fatigue behavior of Zircaloy-2 under asymmetric loading at 400 degrees C |
5 |
| Evolution of microstructure and toughness in 2.25Cr-1Mo steel welds |
5 |
| Buckling and strength of an externally pressurized spherical shell with reinforced opening |
5 |
| Unified constitutive modeling of three alloys under a wide range of temperature |
5 |
| Corrosion defect analysis using domain failure assessment diagram |
5 |
| Microcrack nucleation and early crack growth of a nuclear grade nitrogen alloyed austenitic stainless steel X2CrNiMo18.12 under thermomechanical fatigue loading |
5 |
| Analytical solution for buckling analysis of cylinders with varying thickness subjected to combined axial and radial loads |
5 |
| Modeling of pipeline corrosion degradation mechanism with a Levy Process based on ILI (In-Line) inspections |
5 |
| Mechanical properties and hydrogen induced cracking behaviour of API X70 SAW weldments |
5 |
| Seismic fragility analysis of pressurized piping systems considering ratcheting: A case study |
5 |
| Hybrid laser/arc welding of 304L stainless steel tubes, part 2-Effect of filler wires on microstructure and corrosion behavior |
5 |
| Effect of heat input and role of nitrogen on the phase evolution of 2205 duplex stainless steel weldment |
5 |
| Analysis of creep behavior of welded joints of P91 steel at 600 degrees C |
5 |
| Dual control technique for mitigating water-hammer phenomenon in pressurized steel-piping systems |
5 |
| Swage autofrettage analysis - Current status and future prospects |
4 |
| Role of prior austenite grain boundaries in short fatigue crack growth in hydrogen charged RPV steel |
4 |
| Improved resonance reliability and global sensitivity analysis of multi-span pipes conveying fluid based on active learning Kriging model |
4 |
| Deformation and fracture of cylindrical tubes under detonation loading: A review of numerical and experimental analyses |
4 |
| Effect of electrochemical hydrogen charging on an API X70 pipeline steel with focus on characterization of inclusions |
4 |
| Corrosion risk-based subsea pipeline design |
4 |
| A Fuzzy logic-possibilistic methodology for risk-based inspection (RBI) planning of oil and gas piping subjected to microbiologically influenced corrosion (MIC) |
4 |
| Influence of ovalisation on the plastic collapse of thick cylindrical tubes under uniform bending |
4 |
| Thermal insulation of subsea pipelines for different materials |
4 |
| Interfacial leakage of elastomer seals at low temperatures |
4 |
