| Cemented carbide microstructures: a review |
83 |
| Reactive spark plasma sintering of TiB2-SiC-TiN novel composite |
47 |
| Microstructural, thermal and mechanical characterization of TiB2-SiC composites doped with short carbon fibers |
46 |
| Spark plasma sintering of ZrB2-based composites co-reinforced with SiC whiskers and pulverized carbon fibers |
43 |
| Pressureless sintering of ZrB2 ceramics codoped with TiC and graphite |
41 |
| Selective laser melting of titanium alloy with 50 wt% tantalum: Effect of laser process parameters on part quality |
29 |
| Synergistic effects of graphite nano-flakes and submicron SiC particles on the characteristics of spark plasma sintered ZrB2 nanocomposites |
28 |
| A critical review of diamond like carbon coating for wear resistance applications |
24 |
| Methods for improving ductility of tungsten - A review |
23 |
| Selective laser melting of tungsten and tungsten alloys |
23 |
| Effect of processing parameters on the densification, microstructure and crystallographic texture during the laser powder bed fusion of pure tungsten |
16 |
| Mechanical and electrical properties of NbMoTaW refractory high-entropy alloy thin films |
15 |
| Formation of scanning tracks during Selective Laser Melting (SLM) of pure tungsten powder: Morphology, geometric features and forming mechanisms |
15 |
| Wear resistance of ZrB2 based ceramic composites |
15 |
| The influence of grain growth inhibitors on the microstructure and properties of submicron, ultrafine and nano-structured hardmetals - A review |
15 |
| Study on the adhesion and tribological behavior of PVD TiA1N coatings with a multi-scale textured substrate surface |
15 |
| High-temperature mechanical properties and thermal shock behavior of ternary-layered MAB phases Fe2AlB2 |
14 |
| Microstructures and wear behaviour of (FeCoCrNi)(1-x)(WC)(x) high entropy alloy composites |
13 |
| Traditional and additive manufacturing of a new Tungsten heavy alloy alternative |
13 |
| Mechanisms of deformation and ductility in tungsten - A review |
12 |
| Friction and wear behavior of laser cladded WC-Co and Ni/WC-Co deposits at high temperature |
12 |
| A low-cost, efficient, and industrially feasible pathway for large scale preparation of tungsten nanopowders |
12 |
| High temperature wear resistance and thermal fatigue behavior of Stellite-6/WC coatings produced by laser cladding with Co-coated WC powder |
11 |
| Effect of process parameters on the Selective Laser Melting (SLM) of tungsten |
11 |
| Effects of different sintering methods on the properties of SiC-TiC, SiC-TiB2 composites |
11 |
| The brittle-to-ductile transition in cold rolled tungsten plates: Impact of crystallographic texture, grain size and dislocation density on the transition temperature |
11 |
| Fabrication of tougher ZTA ceramics with sustainable high hardness through (RSM) optimisation |
11 |
| Effect of hard phase content on the mechanical properties of TiC-316 L stainless steel cermets |
11 |
| Effect of processing parameters on microstructure and properties of tungsten heavy alloys fabricated by SLM |
11 |
| Improving tribological performance of cemented carbides by combining laser surface texturing and W-S-C solid lubricant coating |
10 |
| Solid solutioning in ZrB2 with HfB2: Effect on densification and oxidation resistance |
10 |
| Molybdenum and tungsten manufactured by selective laser melting: Analysis of defect structure and solidification mechanisms |
10 |
| Investigation of stress-strain response, microstructure and texture of hot deformed pure molybdenum |
10 |
| Preparation of ultrafine Mo powders via carbothermic pre-reduction of molybdenum oxide and deep reduction by hydrogen |
10 |
| The brittle-to-ductile transition in cold rolled tungsten: On the decrease of the brittle-to-ductile transition by 600 K to-65 degrees C |
10 |
| Wear, erosion and corrosion resistance of HVOF-sprayed WC and Cr3C2 based coatings for electrolytic hard chrome replacement |
10 |
| Selective laser melting of W-Ni-Cu composite powder: Densification, microstructure evolution and nano-crystalline formation |
10 |
| Properties and tribological performance of ceramic-base chromium and vanadium carbide composite coatings |
10 |
| Study on the tool wear and its effect of PCD tool in micro milling of tungsten carbide |
10 |
| Recent progress in development of tungsten-copper composites: Fabrication, modification and applications |
9 |
| Tensile properties of baseline and advanced tungsten grades for fusion applications |
9 |
| Wear mechanisms of diamond-containing hardmetals in comparison with diamond-based materials |
9 |
| The superior thermal stability and tensile properties of hot rolled W-HfC alloys |
9 |
| Densification and flexural strength of ZrB2-30 vol% SiC with different amount of HfB2 |
9 |
| Microstructure and mechanical behavior of ternary phase ZrB2-SiC-AlN nanocomposite |
9 |
| Slurry erosion-corrosion resistance and microbial corrosion electrochemical characteristics of HVOF sprayed WC-10Co-4Cr coating for offshore hydraulic machinery |
9 |
| Fabrication and properties of extrusion-based 3D-printed hardmetal and cermet components |
9 |
| Size-controlled synthesis of nano Mo powders via reduction of commercial MoO3 with carbon black and hydrogen |
9 |
| Effects of Ni addition on mechanical properties and corrosion behaviors of coarse-grained WC-10(Co, Ni) cemented carbides |
9 |
| Wear properties of sintered WC-12%Co processed via Binder Jet 3D Printing (BJ3DP) |
8 |
