| A 3-D conjugated bond-pair-based peridynamic formulation for initiation and propagation of cracks in brittle solids |
47 |
| On hierarchical honeycombs under out-of-plane crushing |
30 |
| Crack twisting and toughening strategies in Bouligand architectures |
25 |
| Shear-induced anisotropy of granular materials with rolling resistance and particle shape effects |
24 |
| A cellular metastructure incorporating coupled negative thermal expansion and negative Poisson's ratio |
22 |
| Numerical analysis of 3D dry-stone masonry structures by combined finite-discrete element method |
20 |
| Wave propagation in elastic metamaterial beams and plates with interconnected resonators |
20 |
| Circular inhomogeneity with Steigmann-Ogden interface: Local fields, neutrality, and Maxwell's type approximation formula |
17 |
| Simulating drop-weight impact and compression after impact tests on composite laminates using conventional shell finite elements |
15 |
| Lower-order symmetric mechanism modes and bifurcation behavior of deployable bar structures with cyclic symmetry |
15 |
| Three scales asymptotic homogenization and its application to layered hierarchical hard tissues |
15 |
| A physically-based damage model for soft elastomeric materials with anisotropic Mullins effect |
14 |
| Buckling of quasi-perfect cylindrical shell under axial compression: A combined experimental and numerical investigation |
14 |
| High fidelity modelling of the compression behaviour of 2D woven fabrics |
14 |
| Enhanced Piola-Hencky discrete models for pantographic sheets with pivots without deformation energy: Numerics and experiments |
14 |
| Development of an RVE and its stiffness predictions based on mathematical homogenization theory for short fibre composites |
14 |
| A high-fidelity approximate model for determining lower-bound buckling loads for stiffened shells |
14 |
| Mechanical properties of 3D double-U auxetic structures |
14 |
| Optimization of postbuckling behaviour of variable thickness composite panels with variable angle tows: Towards Buckle-Free design concept |
13 |
| Multiphase-field modeling of martensitic phase transformation in a dual-phase microstructure |
13 |
| An evolving non-associated Hill48 plasticity model accounting for anisotropic hardening and r-value evolution and its application to forming limit prediction |
13 |
| Nonreciprocal phenomenon in nonlinear elastic wave metamaterials with continuous properties |
13 |
| Exploring the influence of rock inherent heterogeneity and grain size on hydraulic fracturing using discrete element modeling |
12 |
| Probability that a band-gap extremum is located on the irreducible Brillouin-zone contour for the 17 different plane crystallographic lattices |
12 |
| Hyperbolic heat conduction and thermoelastic solution of functionally graded CNT reinforced cylindrical panel subjected to heat pulse |
12 |
| A bond-based micropolar peridynamic model with shear deformability: Elasticity, failure properties and initial yield domains |
12 |
| Microscale phase field modeling of the martensitic transformation during cyclic loading of NiTi single crystal |
12 |
| Aging-dependent strain localization in amorphous glassy polymers: From necking to shear banding |
12 |
| A reduced micromorphic single crystal plasticity model at finite deformations. Application to strain localization and void growth in ductile metals |
12 |
| Toughening strategies in adhesive joints |
12 |
| Finite bending and pattern evolution of the associated instability for a dielectric elastomer slab |
12 |
| Contact involving a functionally graded elastic thin film and considering surface effects |
11 |
| Mechanical properties and failure mechanisms of sandwich panels with ultra-lightweight three-dimensional hierarchical lattice cores |
11 |
| Elastically-isotropic truss lattice materials of reduced plastic anisotropy |
11 |
| Solution of the dynamic frictional contact problem between a functionally graded coating and a moving cylindrical punch |
11 |
| Local fields and overall transverse properties of unidirectional composite materials with multiple nanofibers and Steigmann-Ogden interfaces |
11 |
| Plastic anisotropy and ductile fracture of bake-hardened AA6013 aluminum sheet |
11 |
| Two-scale micropolar plate model for web-core sandwich panels |
11 |
| A novel positive/negative projection in energy norm for the damage modeling of quasi-brittle solids |
10 |
| Buckling analysis of variable angle tow composite plates with a through-the-width or an embedded rectangular delamination |
10 |
| Evaluation and calibration of anisotropic yield criteria in shear Loading: Constraints to eliminate numerical artefacts |
10 |
| Modelling FRP-to-substrate joints using the bilinear bond-slip rule with allowance for friction Full-range analytical solutions for long and short bonded lengths |
10 |
| Micro-sphere based viscoplastic constitutive model for uncured green rubber |
10 |
| Fractal labyrinthine acoustic metamaterial in planar lattices |
10 |
| Analysis of the damage initiation in a SiC/SiC composite tube from a direct comparison between large-scale numerical simulation and synchrotron X-ray micro-computed tomography |
10 |
| Mori-Tanaka estimates of the effective elastic properties of stress-gradient composites |
10 |
| Experimental validation of cylindrical shells under axial compression for improved knockdown factors |
10 |
| A simple homogenized orthotropic model for in-plane analysis of regular masonry walls |
10 |
| Metasurface constituted by thin composite beams to steer flexural waves in thin plates |
10 |
| A cohesive-zone crack healing model for self-healing materials |
10 |
