| Influence of graphene and multi-walled carbon nanotube additives on tribological behaviour of lubricants |
4 |
| Effect of lubrication on the wear behaviour of CrN coating deposited by PVD process |
4 |
| Tribological study on hybrid reinforced aluminium-based metal matrix composites |
4 |
| A comparative study of tribological and mechanical properties of composite polymer coatings on bearing steel |
3 |
| Microstructure and wear behaviour of laser hardened SAE 4130 steels |
3 |
| Wear of chromium nitride coating under high loads and speeds |
3 |
| Solid particle erosion studies on fibre composite with egg shell as filler materials |
3 |
| Experimental study on the tribological properties of CuO-based biodegradable nanolubricants for machine tool slideways |
3 |
| Tribological performance of DLC/DLC and steel/DLC contacts in the presence of additivated oil |
2 |
| Wear and friction behaviour of aluminium metal composite reinforced with graphite particles |
2 |
| Microscopic analysis of the Sol-Gel alumina grinding wheel after the introduction of a synthetic organosilicon polymer-based impregnate dedicated for near dry grinding processes |
2 |
| Wet-chemical etching of GaAs(211)B wafers for controlling the surface properties |
2 |
| Finite element-based contact analysis of a radially functionally graded hemisphere and a rigid flat |
2 |
| Effect of mechanical milling of fly ash on friction and wear response of brake friction composites |
1 |
| Characterisation of electroless Ni-P and electroless composite coatings Ni-P/Ni-PTFE |
1 |
| Pull-off strength and abrasion resistance of anti-corrosive polymer and composite coatings |
1 |
| Mechanical and anti-wear properties of multi-module Cr/CrN coatings |
1 |
| Variation of surface roughness, micro-hardness and friction behaviour during sheet-metal forming |
1 |
| Effect of Al2O3 nanoparticles on tribological behaviour of Mg-6Al alloy-based nanocomposites |
1 |
| SEM-based observations and analysis of the green silicon carbide grinding wheel active surfaces after the graphite and silicone impregnation process |
1 |
| Solid particle erosion studies of D-gun sprayed cermet coatings on ASTM A36 steel |
1 |
| Effect of microwave power on morphology of AgO thin film grown using microwave plasma CVD |
1 |
| Electrochemical studies and surface analyses of laser deposited Zn-Al-Sn coatings on AISI 1015 steel |
1 |
| In-situ formation, anti-corrosion and hardness values of Ti-6Al-4V biomaterial with niobium via laser deposition |
1 |
| Effects of pH on CdO films deposited onto ITO coated glass substrates by electrodeposition |
0 |
| Observation and characterisation of the surface hardness enhancement of the laser remelted NiCrBSi coating |
0 |
| An efficient method for nonlinear characteristic analysis of fixed contact surface and interface in bolted joint and its application |
0 |
| Effect of laser surface texturing on tribological behaviour of grey cast iron |
0 |
| Electrophoretic deposition of zinc-doped hydroxyapatite coatings on titanium: deposition kinetics and coating morphology |
0 |
| Dry sliding friction and wear behaviour of developed copper metal matrix hybrid composites |
0 |
| Mechanical and tribological properties of diamond-like carbon and DLC:Si coatings deposited on stainless steel/WC-Co substrates |
0 |
| Surface energy modification for coating adhesion improvement on polypropylene |
0 |
| Tribological properties of bronze filled PTFE under dry sliding conditions and aqueous environments (distilled water and sea water) |
0 |
| The effect of polymeric biomaterial binder content on corrosion behaviour, magnetic and tribological properties of the magnetic composite based on RE-M-B powder |
0 |
| Copper electrodeposition on silicon electrodes |
0 |
| White light interferometry and MountainsMap (R) - case studies in static load capacity of bearings and surface finish optimisation of orthotic knee joints |
0 |
| Superficial alterations in the generation of a 3D surface. The case of machining by turning. Application of principal component analysis to the study of the various factors involved |
0 |
| A review on plasma sprayed titanium and hydroxyapatite coatings on polyetheretherketone implants |
0 |
| The effect of wollastonite silane-treatment on mechanical and tribological performance of NAO brake-pads |
0 |
| Characterisation and comparison of disc brake pads of heavy vehicles by experimental methods |
0 |
| Surface-modified substrates for the Langmuir-Blodgett deposition of patterned ultra-thin and highly oriented collagen coatings |
0 |
| Friction properties and lubrication mechanism of self-lubricating composite solid lubricant on laser textured AISI 52100 surface in sliding contact |
0 |
| Study of rapid thermal treatment on the microstructural evolution and surface characteristics of the electrodeposited modify Zn/TiO2 composite coatings on AISI 1015 steel |
0 |
| Theoretical models for surface roughness in turning considering inclination and rake angles |
0 |
| A comparative study for the leverage of micro and nano SiC fillers on thermo-mechanical and erosion wear peculiarity of woven glass fibre-based vinyl ester composites |
0 |
