| Edge Effect in Hot Embossing and its Influence on Global Pattern Replication of Polymer-Based Microneedles |
6 |
| Production of Thermoplastic Elastomers Based on Recycled PE and Ground Tire Rubber: Morphology, Mechanical Properties and Effect of Compatibilizer Addition |
5 |
| Extensional Rheology and Processing of Polymeric Materials |
4 |
| Effect of the Addition of ENR on Foam Properties of EVA/NR/Clay Nanocomposites |
4 |
| Morphology and Properties of Unvulcanized and Dynamically Vulcanized PVC/NBR Blend Reinforced by Graphene Nanoplatelets |
4 |
| Flow-Fiber Coupled Viscosity in Injection Molding Simulations of Short Fiber Reinforced Thermoplastics |
4 |
| Flow-Induced Crystallization of Polyamide-6 |
4 |
| Optical and Structural Characteristics of CdSe/PMMA Nanocomposites |
4 |
| Influence of Titanium Dioxide Modified Expandable Graphite and Ammonium Polyphosphate on Combustion Behavior and Physicomechanical Properties of Rigid Polyurethane Foam |
3 |
| Mechanical and Thermal Properties of Teak Wood Flour/Starch Filled High Density Polyethylene Composites |
3 |
| Electrical, Morphological and Thermal Properties of Microinjection Molded Polypropylene/Multi-Walled Carbon Nanotubes Nanocomposites |
3 |
| Characterizing Ultrasonic Micro-Molding Process of Polyetheretherketone (PEEK) |
3 |
| Flow Behavior of a Polypropylene Melt in Capillary Dies |
2 |
| Melt Flow and Flexural Properties of Polypropylene Composites Reinforced with Graphene Nano-Platelets |
2 |
| Influence of Processing Conditions on the Preparation of Clay-Based Nanocomposites by Twin-Screw Extrusion |
2 |
| Enhancement of Injection Molding Consistency by Adjusting Velocity/Pressure Switching Time Based on Clamping Force |
2 |
| Thermoplastic Blends of PP and Waste Rubber Powder: Effects of Compatibilizer on Tensile Properties, Thermal Behavior and Decomposition Kinetics |
2 |
| Numerical Investigations of Fiber Orientation Models for Injection Molded Long Fiber Composites |
2 |
| Numerical Predictions of Fiber Orientation for Injection Molded Rectangle Plate and Tensile Bar with Experimental Validations |
2 |
| Fabrication of Polyethylene Terephthalate Microfluidic Chip Using CO2 Laser System |
2 |
| Structural and Optical Characteristics of Laser Irradiated CdSe/PVA Nanocomposites |
2 |
| Study of Bonding Formation between the Filaments of PLA in FFF Process |
2 |
| Study of Rheology and Plug Assist Thermoforming of Linear and Branched PP Homopolymer and Impact Copolymer |
2 |
| Global Modeling of Single Screw Extrusion with Slip Effects |
2 |
| Modification of Syndiotactic Polypropylene with Nano-Calcium Carbonate and Halloysite |
2 |
| PLA Crystallization Kinetics and Morphology Development |
2 |
| A Criterion for the Formation of Fibrillar Layers in Injection Molded Parts |
2 |
| Influence of Glass Microsphere Filler on the Rheological Behavior of an Epoxy Resin |
2 |
| Using a Visualization Mold to Discuss the Influence of Gas Counter Pressure and Mold Temperature on the Fountain Flow Effect |
2 |
| Effects of Mean Particle Size and Addition Weight Percentage of CaCO3 on Selected Rheological Properties of Filled LDPE |
1 |
| Development of a Segmented Temperature Control for Targeted Solidification in Injection Molding |
1 |
| An Effective alpha/beta Nucleating Agent Compound for the Preparation of Polypropylene |
1 |
| Interfacial Tension Properties in Biopolymer Blends: From Deformed Drop Retraction Method (DDRM) to Shear and Elongation Rheology-Application to Blown Film Extrusion |
1 |
| Experimental and Theoretical Study on Screw Filling in Starve Fed Single Screw Extruders |
1 |
| The Effect of Cellulose Nanocrystals (CNC) on Isothermal Crystallization Kinetics of LLDPE and HDPE |
1 |
| Preparation of Poly(l-lactic acid) Scaffolds by Thermally Induced Phase Separation: Role of Thermal History |
1 |
| Thermomechanical Degradation of Polyetherimide (PEI) by Friction-Based Joining and the Effects on Quasi-Static Mechanical Strength of Hybrid Joints |
1 |
| Kinetic Analysis on Thermal Decomposition of Poly(lactic acid) Toughened by Calcium Sulfate Whiskers |
1 |
| Research on Influencing Factors of the Thermal Contact Resistance in Thin-Wall Injection Molding |
1 |
| Roll-to-Roll Hot Embossing of High Aspect Ratio Micro Pillars for Superhydrophobic Applications |
1 |
| Flame Retardancy Effects on Intumescent Coatings with Vinyl Acetate Copolymers |
1 |
| Modeling of Solid Conveying Pressure Throughput Behavior of Single Screw Smooth Barrel Extruders under Consideration of Backpressure and High Screw Speeds |
1 |
| Investigation of Thermal and Dielectric Properties of Epoxy Based Hybrid Composites for Microelectronics Applications |
1 |
| Influence of PA6 as a Charring Agent on Flame Retardancy, Thermal and Mechanical Properties of LGFR PP Composites |
1 |
| Fill Factor Effects in Highly-Viscous Non-Isothermal Rubber Mixing Simulations |
1 |
| Morphology and Isothermal Crystallization Kinetics of Polypropylene/Poly(ethylene-co-vinyl alcohol) Blends |
1 |
| Study on Influence of Co-Injection Molding Process on Self-Reinforcing Characteristics of Self-Reinforced Polypropylene Composite via Visualization |
1 |
| Influence of Ultrasonic Transducer Structural Parameters on the Frictional Plasticizing Heat Generation of Polymer Particles |
1 |
| Damping, Thermal and Mechanical Analyses of Polycarbonate/Cerium Oxide Composites for Structural Applications |
1 |
| On Induced Properties and Self Heating during Free Blowing of PET Preform |
1 |
