| Interaction behaviour between top blown jet and molten steel during BOF steelmaking process |
8 |
| Investigation of in-flight reduction of magnetite concentrate by hydrogen |
7 |
| Titanium microalloyed steels |
7 |
| Online prediction and monitoring of mechanical properties of industrial galvanised steel coils using neural networks |
6 |
| Precipitation behaviour and control of TiN inclusions in rail steels |
6 |
| Effect of CaO on the reduction behaviour of iron ore-coal composite pellets in multi-layer bed rotary hearth furnace |
5 |
| Coordinating optimisation of F-EMS and soft reduction during bloom continuous casting process for special steel |
5 |
| Graphitisation effect of coke with changing annealing time and temperature on pore structure and apparent gasification rate with H2O |
5 |
| Research of microalloy elements to induce intragranular acicular ferrite in shipbuilding steel |
5 |
| Thermal and thermomechanical evalutions of channel induction furnace applying strong insulation containing lightweight aggregates |
5 |
| Preparation of blast furnace burdens with middle-low basicity from high-SiO2 -content iron concentrates by composite agglomeration process (CAP) |
5 |
| Distribution of macro-inclusions in low carbon aluminium-killed steel slabs |
5 |
| Modelling inclusion evolution in Al-Ti-killed steels during ladle mixing process |
5 |
| Study of the combustion behaviour and temperature of pulverised coal in a tuyere zone of blast furnace |
5 |
| Effect of initial large-sized inclusion content on inclusion removal during electroslag remelting of H13 die steel |
4 |
| Numerical modelling of the transport and removal of inclusions in an industrial gas-stirred ladle |
4 |
| Effect of snorkel shape on the fluid flow during RH degassing process: mathematical modelling |
4 |
| Effect of TiO2 on the crystallisation behaviour of CaF2-CaO-Al2O3-MgO slag for electroslag remelting of Ti-containing tool steel |
4 |
| Effects of Cr and V additions on the microstructure and properties of high-vanadium wear-resistant alloy steel |
4 |
| Toughness improvement by Zr addition in the simulated coarse-grained heat-affected zone of high-strength low-alloy steels |
4 |
| Hydrodynamic effects created by argon stirring liquid steel in a one-strand tundish |
4 |
| Improvement of centre segregation in continuous casting bloom and the resulting carbide homogeneity in bearing steel GCr15 |
4 |
| Value-in-use of biocarbon fuel for direct injection in blast furnace ironmaking |
4 |
| Hot metal dephosphorisation by low basicity slag in the early stage of converting process |
4 |
| Analysis on morphology and stress concentration in continuous casting bloom to learn the formation and propagation of internal cracks induced by soft reduction technology |
4 |
| Inclusions modification in heat resistant steel containing rare earth elements |
4 |
| The effects of MgO and Al2O3 behaviours on softening-melting properties of high basicity sinter |
4 |
| Participating patterns of trace elements in PM2.5 formation during iron ore sintering process |
4 |
| Numerical analysis of effect of the solutes on formation of MnS in non-tempered steel |
4 |
| Water consumption and wastewater discharge in China's steel industry |
4 |
| Exploration of morphology evolution of the inclusions in Mg-treated 16MnCrS5 steel |
4 |
| Viscous characteristics and modelling of CaO-Al2O3-based mould flux with B2O3 as a substitute for CaF2 |
3 |
| Improvement in casting practice by controlling the drainage rate and hearth liquid level to develop an efficient casthouse management practice in blast furnace |
3 |
| A novel dual plugs gas blowing mode for efficient ladle metallurgy |
3 |
| Utilisation of low-grade raw materials for preparation of reactive catalysed-coke for blast furnace application |
3 |
| Study on the melting characteristics of steel scrap in molten steel |
3 |
| Coupling relationship between dephosphorisation and desulphurisation abilities or potentials for CaO-FeO-Fe2O3-Al2O3-P2O5 slags over a large variation range of slag oxidisation ability during secondary refining process of molten steel |
3 |
| Optimisation of the blast furnace burden based on its primary slag formation behaviour |
3 |
| The effects of strength ratio on the forming limit diagram of tailor-welded blanks |
3 |
| Temperature measurement of molten iron in taphole of blast furnace combined temperature drop model with heat transfer model |
3 |
| Understanding mould powders for high-speed casting |
3 |
| Transport phenomena during horizontal single belt casting process using an optimized inclined feeding system |
3 |
| Fuzzy grey relational analysis for influencing factors of heat transfer in a blast furnace hearth |
3 |
| Optimisation model of fuel distribution in materials bed of iron ore sintering process |
3 |
| Inclusion evolution after calcium addition in Ti-bearing Al-kill steel |
3 |
| A review of high-temperature experimental techniques used to investigate the cohesive zone of the ironmaking blast furnace |
3 |
| Effect of magnesium addition in low-carbon steel part 1: behaviour of austenite grain growth |
3 |
| Effects of heavy reduction technology on internal quality of continuous casting bloom |
3 |
| A thermodynamic model for calculating manganese distribution ratio between CaO-SiO2-MgO-FeO-MnO-Al2O3-TiO2-CaF2 ironmaking slags and carbon saturated hot metal based on the IMCT |
3 |
| Reduction of synthetic stainless steel slags by aluminium |
3 |
