| On Mechanical Properties of Cellular Steel Solids With Shell-Like Periodic Architectures Fabricated by Selective Laser Sintering |
8 |
| Monte Carlo Model for Piezoresistivity of Hybrid Nanocomposites |
6 |
| Hybrid Hollow Microlattices With Unique Combination of Stiffness and Damping |
5 |
| Effects of Graphene Oxide Thin Films and Nanocomposite Coatings on Flame Retardancy and Thermal Stability of Aircraft Composites: A Comparative Study |
5 |
| Atomistic Energetics and Critical Twinning Stress Prediction in Face and Body Centered Cubic Metals: Recent Progress |
5 |
| Thermomechanically Tunable Elastic Metamaterials With Compliant Porous Structures |
4 |
| Constitutive Behavior for Quenching of Al-Cu-Mg Alloy With Consideration of Precipitation |
4 |
| Compressibility, Damage, and Age-Hardening Effects of Solid Propellants Using Finite Strain Constitutive Model |
4 |
| Effect of Tungsten Inert Gas Remelting on Microstructure, Interface, and Wear Resistance of Fe-Based Coating |
3 |
| Influence of Inhomogeneous Deformation on Tensile Behavior of Sheets Processed Through Constrained Groove Pressing |
3 |
| Production of Al Metal Matrix Composites Reinforced With Carbon Nanotubes by Two-Stage Melt-Based HPDC-CE Method |
3 |
| Mechanical Behavior of Silicon Carbide Under Static and Dynamic Compression |
3 |
| The Use of Genetic Algorithms to Calibrate Johnson-Cook Strength and Failure Parameters of AISI/SAE 1018 Steel |
3 |
| The Rapid Cooling Effect on Microstructure of Nickel-Based Alloys Welding Joint |
3 |
| Micro-Computed Tomography as a Tool to Investigate the Deformation Behavior of Particulate-Filled Composite Materials |
3 |
| Effect of Shot Peening Process on the Fatigue Life of Shot Peened Low Alloy Steel |
3 |
| A Model for Calculating Hyperelastic Material Properties Under Thermal Aging |
3 |
| Numerical Investigation of the Origin of Anomalous Tensile Twinning in Magnesium Alloys |
2 |
| High Strain Rate Behavior of Carbon Nanotubes Reinforced Aluminum Foams |
2 |
| Warm Hydromechanical Deep Drawing of AA 5754-0 and Optimization of Process Parameters |
2 |
| Effect of Tailoring Martensite Shape and Spatial Distribution on Tensile Deformation Characteristics of Dual Phase Steels |
2 |
| Microstructure Modeling of Dynamically Recrystallized Grain Size of Sintered Al-4 wt % B4C Composite During Hot Upsetting |
2 |
| High Strain Rate and High Temperature Behavior of Ti-6Al-4V Alloy Under Compressive Loading |
2 |
| Surface Quality and Contamination on Si Wafer Surfaces Sliced Using Wire-Electrical Discharge Machining |
2 |
| Investigation of Oil Adsorption Performance of Polypropylene Nanofiber Nonwoven Fabric |
2 |
| Viscoelastic Response of Closed-Cell Polyurethane Foams From Half Hour-Long Creep Tests: Identification of Lomnitz Behavior |
2 |
| A Microstructure-Based Model for Creep of Gamma Prime Strengthened Nickel-Based Superalloys |
2 |
| Parallelized Finite Element Analysis of Knitted Textile Mechanical Behavior |
2 |
| A 149 Line Homogenization Code for Three-Dimensional Cellular Materials Written in MATLAB |
2 |
| Mechanical Behavior of Differently Oriented Electron Beam Melting Ti-6Al-4V Components Using Digital Image Correlation |
2 |
| Bridging Length Scales in the Analysis of Transient Tests for Metallic Materials |
2 |
| Polymer Modulus of Elasticity and Hardness From Impact Data |
1 |
| Mechanical Characterization and Modeling of Direct Metal Laser Sintered Stainless Steel GP1 |
1 |
| Experimental Characterization and Finite Element Prediction of Large Strain Spring-Back Behavior of Poly(Methyl Methacrylate) |
1 |
| Cold Metal Transfer Welding of AA6061 to AA7075: Mechanical Properties and Corrosion |
1 |
| Development of Gradient Concentrated Single-Phase Fine Mg-Zn Particles and Effect on Structure and Mechanical Properties |
1 |
| Crystal Viscoplasticity of a Ni-Base Superalloy in the Aged State |
1 |
| Interference-Fit Effect on Improving Bearing Strength and Fatigue Life in a Pin-Loaded Woven Carbon Fiber-Reinforced Plastic Laminate |
1 |
| Stress-State, Temperature, and Strain Rate Dependence of Vintage ASTM A7 Steel |
1 |
| Mechanical and Electrical Characterization of Two Carbon/Ultra High Molecular Weight Polyethylene Composites Created Via Equal Channel Angular Processing |
1 |
| Analysis and Numerical Simulation of the Structural Performance of Fused Deposition Modeling Samples With Variable Infill Values |
1 |
| Influence of Thermal Ratcheting on the Creep and Mechanical Properties of High-Density Polyethylene |
1 |
| Thermofluid Properties of Ti-6Al-4V Melt Pool in Powder-Bed Electron Beam Additive Manufacturing |
1 |
| The Precise Determination of the Johnson-Cook Material and Damage Model Parameters and Mechanical Properties of an Aluminum 7068-T651 Alloy |
1 |
| Investigating Discrepancies in Vibration Bending Fatigue Behavior of Additively Manufactured Titanium 6Al-4V |
1 |
| Impact of the Lattice Angle on the Effective Properties of the Octet-Truss Lattice Structure |
1 |
| A Numerical and Experimental Study of Distribution of the Residual Stress on the Shot Peened Low Alloy Steel |
1 |
| Quantum Conductance of Copper-Carbon Nanotube Composites |
1 |
| Multiscale Material Modeling and Simulation of the Mechanical Behavior of Dual Phase Steels Under Different Strain Rates: Parametric Study and Optimization |
1 |
| On the Utility of Crystal Plasticity Modeling to Uncover the Individual Roles of Microdeformation Mechanisms on the Work Hardening Response of Fe-23Mn-0.5C TWIP Steel in the Presence of Hydrogen |
1 |
