| Evaluating the thermal failure risk of large-format lithium-ion batteries using a cone calorimeter |
6 |
| The impact of sulfur oxidation level on flame retardancy |
6 |
| Establishing pyrolysis kinetics for the modelling of the flammability and burning characteristics of solid combustible materials |
5 |
| Enhanced flame retardancy of epoxy resin containing a phenethyl-bridged DOPO derivative/montmorillonite compound |
5 |
| Powder-epoxy resin/glass fabric composites with reduced flammability |
4 |
| The effects of N,N-(pyromellitoyl)-bis-l-phenylalanine diacid ester glycol on the flame retardancy and physical-mechanical properties of rigid polyurethane foams |
4 |
| Response of stone wool-insulated building barriers under severe heating exposures |
3 |
| Critical ventilation velocity of two fire sources with different separating distances in road tunnel |
3 |
| Sensitivity analysis on the microscale combustion calorimeter for polyurethane foam using a full factorial design methodology |
3 |
| Burning process characterization of biodiesel pool fires |
3 |
| Flame retardance of modified graphene to pure cotton fabric |
3 |
| SEBS-based thermoplastic elastomers containing aluminum hypophosphite and melamine cyanurate: Thermal degradation, flame retardancy, and mechanical properties |
2 |
| Influence of thermo-oxidative aging on flame retardancy, thermal stability, and mechanical properties of long glass fiber-reinforced polypropylene composites filled with organic montmorillonite and intumescent flame retardant |
2 |
| Influence of volcanic ash, rice husk ash, and solid residue of catalytic pyrolysis on the flame-retardant properties of polypropylene composites |
2 |
| The synthesis and characterization of a DOPO derivative bearing an active terminal epoxy group: e-DOPO and its application in rigid polyurethane foam |
2 |
| Assessing fire-blocking effectiveness of barrier fabrics in the cone calorimeter |
2 |
| Experimental study on combustion characteristics of blended fuel pool fires |
2 |
| Using experimental sprinkler actuation times to assess the performance of Fire Dynamics Simulator |
2 |
| Experimental and numerical study on connecting pipe and vessel size effects on methane-air explosions in interconnected vessels |
2 |
| Characterization of stone wool properties for fire safety engineering calculations |
2 |
| An improved model for estimating heat release rate in horizontal cable tray fires in open space |
2 |
| Considerations on reaction to fire tests of polyethylene foam with a cone calorimeter apparatus |
2 |
| Tenability analysis for improvement of firefighters' performance in a methane fire event at a coal mine working face |
1 |
| Characterization of stovetop cooking oil fires |
1 |
| Influence of model assumptions on charring polymer decomposition in the cone calorimeter |
1 |
| Electrical safety of suppressing wildfires near high-voltage transmission lines using water mist |
1 |
| Flame-retardant mechanism of zinc borate and magnesium hydroxide in aluminum hypophosphite-based combination for TPE-S composites |
1 |
| The effect of intumescent mat on post-fire performance of carbon fibre reinforced composites |
1 |
| Modified xonotlite-type calcium silicate hydrate slabs for fire doors |
1 |
| Performance analysis of a heat transfer and sub-grid chemical reaction distributed activation energy model for fire simulations |
1 |
| Computational fluid dynamics simulations of the impact of a water spray on a fire-induced smoke layer inside a hood |
1 |
| In situ thermal-conductivity measurements and morphological characterization of intumescent coatings for fire protection |
1 |
| Influence of grammage on heat release rate of polypropylene fabrics |
1 |
| Assessment of the capabilities of FireFOAM to model large-scale fires in a well-confined and mechanically ventilated multi-compartment structure |
1 |
| Experimental study on fire behaviors of flexible photovoltaic panels using a cone calorimeter |
1 |
| Pyrolysis modeling, sensitivity analysis, and optimization techniques for combustible materials: A review |
0 |
| A modified zone model on vertical cable tray fire in a confined compartment in the nuclear power plant |
0 |
| Numerical and experimental investigation of carbon monoxide spread in underground mine fires |
0 |
| Fires originating in branch-circuit NM cables due to installation damage |
0 |
| Synthesis of hollow tin dioxide and its improvement of flame retardancy and toughness on poly(vinyl chloride) |
0 |
| Bench-scale test facility for evaluating the performance of thermal imagers for fire service applications |
0 |
| The use of expanded graphite sheet as an efficient method for preventing heat explosion in portable gas stoves |
0 |
| Experimental study of the characteristic parameters of the combustion of the wood of ancient buildings |
0 |
| Smoke emission and temperature characteristics of the long-term overloaded wire in space |
0 |
| Pyrolysis and ignition delay time of poly(methyl methacrylate) exposed to ramped heat flux |
0 |
| Compartment temperature estimation of a multiple-layer cable tray fire with different cable arrangements in a closed compartment |
0 |
| Evolution of pool fire plume characteristics during the depressurization process of an aircraft cargo compartment |
0 |
| Heat transfer and smoke flow filling progress in a super-high atrium under influence of fire source characteristics |
0 |
| Aluminum hypophosphite and aluminum phenylphosphinate: A comprehensive comparison of chemical interaction during pyrolysis in flame-retarded glass-fiber-reinforced polyamide 6 |
0 |
