| Utilizing Fundamental Beam-Mode Shaping Technique for Top-Hat Laser Intensities in Direct Laser Interference Patterning |
6 |
| High Power Laser Processing with Ultrafast and Multi-Parallel Beams |
6 |
| High-Efficiency Nanostructuring using Multi-Beam Interference by Consecutively Deposited Ultrashort Laser Pulses on Tool Steel |
5 |
| Multi Pulse Pump-Probe Diagnostics for Development of Advanced Transparent Materials Processing |
5 |
| Biomimetic Anti-adhesive Surface Micro-structures of Electrosurgical Knife Fabricated by Fibre Laser |
5 |
| Ablation Characteristics of Alumina and Zirconia Ceramics on Ultra-short Pulsed Laser Machining |
5 |
| Positive Effect of Laser Structured Surfaces on Tribological Performance |
4 |
| In-Situ Analysis of Ultrashort Pulsed Laser Ablation with Pulse Bursts |
4 |
| Homogeneous Low Spatial Frequency LIPSS on Dielectric Materials Generated by Beam-Shaped Femtosecond Pulsed Laser Irradiation |
4 |
| Laser-Induced Periodic Surface Structures (LIPSS) on Polymers Processed with Picosecond Laser Pulses |
4 |
| Controllable Spatial Array of Bessel-like Beams with Independent Axial Intensity Distributions for Laser Microprocessing |
3 |
| Influence of Pulse Duration on High-Precision Manufacturing of 3D Geometries |
3 |
| Vector Beams with Parabolic and Elliptic Cross-Sections for Laser Material Processing Applications |
3 |
| Optical Bessel-like Beams with Engineered Axial Phase and Intensity Distribution |
3 |
| Multi-Material Deposition of Polymer Powders with Vibrating Nozzles for a New Approach of Laser Sintering |
3 |
| Early Stage Material Motion and Transient Optical Properties of Metals after Ultrashort Laser Pulse Irradiation |
3 |
| Short and Ultrashort Pulsed Laser Processing of Zinc: Resolidification Morphology of Ablated Craters |
3 |
| Extremely Low Ablation Rate of Metals Using Xecl Excimer Laser |
2 |
| Ultrafast-Laser Manufacture of Radially Emitting Optical Fiber Diffusers for Medical Applications |
2 |
| Microfabrication of Au Film Using Optical Vortex Beam |
2 |
| A New Approach to Seal Polymer Microfluidic Devices Using Ultrashort Laser Pulses |
2 |
| Multimaterial Manufacture Through Combining Optical Tweezers with Multiphoton Fabrication |
2 |
| High-Efficiency Sub-Micrometer Multi-Beam Interference Structuring for Large-Scale Surface Using Ultrashort Laser Pulses |
2 |
| Fabrication of Nickel-Gold Microsensor Using In Situ Laser-Induced Metal Deposition Technique |
2 |
| Laser Micro Machining of Alumina by a Picosecond Laser |
2 |
| Protecting Sub-Micrometer Surface Features in Polymers from Mechanical Damage Using Hierarchical Patterns |
2 |
| Large Scale Ultrafast Laser Micro Texturing with Multi-Beams |
2 |
| High Pulse Repetition Frequency Micro Hole Drilling of Silicon Using Ultrashort Pulse Laser Radiation |
2 |
| Effect of Circular Arc Radius on Laser Scribing Width and Depth of Al2O3 Ceramics: Experiment and Numerical Simulation |
1 |
| Welding of Glass and Copper with a Rough Surface using Femtosecond Fiber Laser Pulses |
1 |
| An Improved Scanning Strategy for Long Pulsed Laser Drilling of Carbon Fiber Textiles |
1 |
| Effect of the Combination of Femtosecond Laser Pulses Exposure on the Etching Rate of Fused Silica in Hydrofluoric Acid |
1 |
| Evaluation of Key Geometrical and Mechanical Properties for Remote Laser Welded AC-170PX Aluminium Joints |
1 |
| Parabolic Vector Focus Wave Modes |
1 |
| Fabrication of High Aspect Ratio Channels in Fused Silica Using Femtosecond Pulses and Chemical Etching at Different Conditions |
1 |
| Laser Ablation and Seeding for the Preparation of Highly Transparent Copper Conductive Networks on Glass |
1 |
| Laser Processing High Aspect Ratio Groove Wick for Improving the Thermal Performance of Flat Micro Heat Pipe |
1 |
| Increasing Productivity of Ultrashort Pulsed Laser Ablation in Advance for a Combination Process with ns-laser |
1 |
| Ultrafast Laser Structuring within a Process Chain - Influence of the Surface Morphology |
1 |
| Hybrid Laser Scribing and Chemical Etching Technique using Pulsed Nd3+:YAG Laser to Fabricate Controlled Micro Channel Profile |
1 |
| Vertical Microchannels for Microfluidic Multilayer Interconnections in PMMA |
1 |
| Laser-Induced Backside Wet Etching of SiO2 with a Visible Ultrashort Laser Pulse by Using KMnO4 Solution as an Absorber Liquid |
1 |
| Heat Accumulation Effects during Ultrashort Pulse Laser Ablation with Spatially Shaped Beams |
1 |
| Static and Dynamic Contact Angle of Water Influenced by Femtosecond Laser Based Ripple Structures on Metals |
1 |
| Embedded Metal Microstructures in Glass Substrates by a Combined Laser Trenching and Printing Process |
1 |
| Laser-induced Microplasma as Effective Tool for Phase Elements Fabrication on Amorphous and Crystalline Materials |
1 |
| Controlling Micron and Submicron Scale Laser Induced Surface Structures on Stainless Steel with Industrial Femtosecond Lasers |
1 |
| Direct Laser Printing of Liver Cells on Porous Collagen Scaffolds |
1 |
| Single Track of Selective Laser Melting Process: Modeling and Experimental Comparison |
1 |
| Adaption of Energy Deposition in Helical Drilling of Multidimensional Micro Holes Using Ultrashort Laser Pulses |
1 |
