| Preparation and In-vitro Degradation Behavior of Poly(L-lactide-co-glycolide-co-epsilon-caprolactone) Terpolymer |
8 |
| Melting and Crystallization Behaviors of Poly(Lactic Acid) Modified with Graphene Acting as a Nucleating Agent |
8 |
| Fabrication and Characterization of Polyethylene Nanocomposite Films Containing Zinc Oxide (ZnO) Nanoparticles Synthesized by a Cost-Effective and Safe Method |
6 |
| Electric Modulus Spectroscopic Studies of the Dielectric Properties of Carbon Nanotubes/Epoxy Polymer Composite Materials |
5 |
| Preparation of High-Quality Polyacrylonitrile Precursors for Carbon Fibers Through a High Drawing Ratio in the Coagulation Bath During a Dry-Jet Wet Spinning Process |
5 |
| Fabrication of Cellulose Aerogels Using a Green/Clean Procedure |
5 |
| Synthesis and Characterization of Terpolymers of poly(L-lactide-glycolide-epsilon-caprolactone) |
5 |
| In-Vitro Degradation Behaviors of Composite Scaffolds Based on 4-Butadnediamine Modified Poly(lactide-co-glycolide) and Nanobioceramics |
5 |
| Evaluation of Properties and Structural Transitions of Poly-L-lysine: Effects of pH and Temperature |
4 |
| Preparation and Properties of Polyurethane Hydrogels Based on Hexamethylene Diisocyanate/Polycaprolactone-Polyethylene Glycol |
4 |
| Fabrication of Polypropylene/Poly (TrimethyleneTerephthalate) Blend Fibers with Highly Improved Resiliency and Preserved Mechanical Properties |
4 |
| High-Speed Melt Spinning of Polylactide/Poly(Butyleneterephthalate) Bicomponent Fibers: Mechanism of Fiber Structure Development and Dyeing Behavior |
4 |
| Amphiphilic Drug Delivery Microcapsules via Layer-by-Layer Self-Assembly |
4 |
| Thermal Stability and Decomposition Kinetics of Poly(Methacryloyloxyethyl Trimethyl Ammonium Chloride-Co-Acrylamide) |
4 |
| In-vitro degradation behavior and biological properties of a novel maleated poly (D, L-lactide-co-glycolide) for biomedical applications |
3 |
| Mechanical and Thermal Properties of Polypropylene/Silica Aerogel Composites |
3 |
| Surface Modification of Poly (ether ether ketone) with a Medlite C6 (ND-YAG Q-Switched) Skin Treatment Laser |
3 |
| Rheological Behaviors and Properties of Poly (Ether Ether Ketone) In-Situ Blends: Effect of Chemical Structure of Added Thermotropic Liquid Crystalline Polyarylates |
3 |
| Structure and Properties of Polypropylene/Polyolefin Elastomer/Organic Montmorillonite Nanocomposites |
3 |
| Melt Crystallization Behavior of Injection-Molded High-Density Polyethylene Based Upon a Solidification Kinetic Analysis |
3 |
| Preparation and Rheology of Isocyanate Functionalized Graphene Oxide/Thermoplastic Polyurethane Elastomer Nanocomposites |
3 |
| Synthesis of Tapioca Cellulose-based Poly(amidoxime) Ligand for Removal of Heavy Metal Ions |
3 |
| Bio-Adsorbent from Carboxymethyl Cellulose and Tannin for Dye Adsorption |
3 |
| Temperature Dependence Characteristics of Biodegradable Polycaprolactone Grafted Propargyl Dehydroabietic Ester (PCL-g-DAPE) |
2 |
| Synthesis and Characterization of a Fluorescent Water-Borne Polyurethane Based on a Novel Naphthalimide Dye |
2 |
| Temperature Effect on the Elasticity of Acrylamide-n-Isopropylacrylamide Copolymers |
2 |
| Investigation of the Morphological and Mechanical Properties of Polyethylene Terephthalate (PET)/Ethylene Propylene Diene Rubber (EPDM) Blends in the Presence of Multi-Walled Carbon Nanotubes |
2 |
| Influence of Polycarbonate on the Crystallization Behavior of Poly(Trimethylene Terephthalate)/Polycarbonate Blends |
2 |
| Crystallization, Flame Retardancy and Mechanical Properties of Poly(Butylene Terephthalate)/Brominated Epoxy/Nano-Sb2O3 Composites Dispersed By High Energy Ball Milling |
2 |
| Rheology, Crystallization, Mechanical and Barrier Properties of Polyamide 6/66 Nanocomposites with Exfoliated Organoclays |
2 |
| Biodegradable Cell-Seeded Collagen Based Polymer Scaffolds for Wound Healing and Skin Reconstruction |
2 |
| Long-Term Hydrothermal Aging Behavior and Aging Mechanism of Glass Fibre Reinforced Polyamide 6 Composites |
2 |
| Poly (Vinyl Alcohol)/Chitosan/Akermanite Nanofibrous Scaffolds Prepared by Electrospinning |
2 |
| Relationship between Peroxide Initiators and Properties of Styrene Grafted Polypropylene via Reactive Extrusion |
2 |
| Investigation on Properties of Polypropylene/Multi-walled Carbon Nanotubes Nanocomposites Prepared by a Novel Eccentric Rotor Extruder Based on Elongational Rheology |
2 |
| Nonisothermal Crystallization Kinetics of Ethylene Vinyl Alcohol Copolymer with Poly(oxypropylene)diamine Intercalated Montmorrilonite |
2 |
| Mechanical Properties of Rubber Sheets Produced by Direct Molding of Ground Rubber Tire Powder |
2 |
| Influence of the Addition of Nano-porous Graphite/Parafffin Additive on the Wear Properties of Phenol-Formaldehyde Resin Composites |
2 |
| Shape Memory Properties of Melt-Blended Olefin Block Copolymer (OBC)/Ethylene-Vinyl Acetate Blends |
2 |
| Drug Release Behavior of a Drug-Loaded Polylactide Nanofiber Web Prepared via Laser-Electrospinning |
2 |
| Morphology and Mechanical Properties of Polyamide 6/Acrylonitrile-Butadiene-Styrene Blends Containing Carbon Nanotubes |
2 |
| Characterization of Polyvinyl Alcohol/ZnO Nanocomposite Hydrogels for Wound Dressings |
2 |
| Impact of the Structural Changes on the Fracture Behavior of Naturally Weathered Low-Density Polyethylene (LDPE) Films |
1 |
| Effect of Bamboo Flour (BF) Content on the Dynamic Rheological Characteristics of BF-filled High-density Polyethylene (HDPE) |
1 |
| Mechanical, Biodegradation and Morphological Properties of Sisal Fiber Reinforced Poly(Lactic Acid) Biocomposites |
1 |
| Styrene Butadiene Rubber/Silicone Rubber Blends Filled With Dough Moulding Compound |
1 |
| Phase Transitions in Isotactic Polybutene-1 |
1 |
| Characterization of Chitosan-Gelatin Blend Scaffolds |
1 |
| Friction and Wear Behaviors of Surface-Modified Carbon Fabric/Epoxy Resin Composites |
1 |
| Cellulose Acetate/Activated Carbon Composite Membrane with Effective Dye Adsorption Performance |
1 |
