| Additive Manufacturing of Metallic Materials: A Review |
43 |
| Additive Manufacturing of Ceramic Heat Exchanger: Opportunities and Limits of the Lithography-Based Ceramic Manufacturing (LCM) |
18 |
| Corrosion Behavior of 316L Stainless Steel Fabricated by Selective Laser Melting Under Different Scanning Speeds |
17 |
| The Atomic Structure of Ti2C and Ti3C2 MXenes is Responsible for Their Antibacterial Activity Toward E-coli Bacteria |
17 |
| Grain Boundary Wetting by a Second Solid Phase in Ti-Fe Alloys |
13 |
| The Effects of Grain Refinement and Rare Earth Intermetallics on Mechanical Properties of As-Cast and Wrought Magnesium Alloys |
13 |
| Tribological Behavior of Pulsed Electrodeposited Ni-W/SiC Nanocomposites |
13 |
| Metallization of Carbon Fiber Reinforced Polymers for Lightning Strike Protection |
12 |
| A Perspective on Solid-State Additive Manufacturing of Aluminum Matrix Composites Using MELD |
12 |
| Modeling of Powder Bed Manufacturing Defects |
10 |
| High Chromium Cast Irons: Destabilized-Subcritical Secondary Carbide Precipitation and Its Effect on Hardness and Wear Properties |
10 |
| Effects of Disodium Phosphate Concentration (Na2HPO4 center dot 2H(2)O) on Microstructure and Corrosion Resistance of Plasma Electrolytic Oxidation (PEO) Coatings on 2024 Al Alloy |
10 |
| Build Orientation Effects on Texture and Mechanical Properties of Selective Laser Melting Inconel 718 |
10 |
| Preliminary Investigation of Building Strategies of Maraging Steel Bulk Material Using Wire plus Arc Additive Manufacture |
9 |
| Thermophysical Properties of High-Frequency Induction Heat Sintered Graphene Nanoplatelets/Alumina Ceramic Functional Nanocomposites |
9 |
| Formation of Lamellar Carbides in Alloy 617-HAZ and Their Role in the Impact Toughness of Alloy 617/9%Cr Dissimilar Welded Joint |
9 |
| Plasma Electrolytic Oxidation Coatings on Pure Ti Substrate: Effects of Na3PO4 Concentration on Morphology and Corrosion Behavior of Coatings in Ringer's Physiological Solution |
9 |
| An Analysis on the Constitutive Models for Forging of Ti6Al4V Alloy Considering the Softening Behavior |
9 |
| The Temperature Effect on the Compressive Behavior of Closed-Cell Aluminum-Alloy Foams |
9 |
| Nonlinear Resonance Response of Porous Beam-Type Implants Corresponding to Various Morphology Shapes for Bone Tissue Engineering Applications |
8 |
| Experimental and Numerical Investigation of PZT Response in Composite Structures with Variable Degradation Levels |
8 |
| Microstructure Characteristics and Comparative Analysis of Constitutive Models for Flow Stress Prediction of Inconel 718 Alloy |
8 |
| The Corrosion Behavior of Zn/Graphene Oxide Composite Coatings Fabricated by Direct Current Electrodeposition |
8 |
| Mechanical Properties and Wear Behavior of AA5182/WC Nanocomposite Fabricated by Friction Stir Welding at Different Tool Traverse Speeds |
8 |
| Characterizing the Effect of Thermal Processing on Feedstock Al Alloy Powder for Additive Manufacturing Applications |
8 |
| Structural and Mechanical Properties of Zr-Si-N Coatings Deposited by Arc Evaporation at Different Substrate Bias Voltages |
8 |
| Effect of Different Post-treatments on the Microstructure of EBM-Built Alloy 718 |
8 |
| Surface Treatment of Powder-Bed Fusion Additive Manufactured Metals for Improved Fatigue Life |
8 |
| Processing Parameter Effects on Residual Stress and Mechanical Properties of Selective Laser Melted Ti6Al4V |
8 |
| Wear Behavior of AZ31/Al2O3 Magnesium Matrix Surface Nanocomposite Fabricated via Friction Stir Processing |
8 |
| Additive Manufacturing of PLA and CF/PLA Binding Layer Specimens via Fused Deposition Modeling |
8 |
| Improved High-Temperature Aluminum Alloys Containing Cerium |
8 |
| Processing, As-Cast Microstructure and Wear Characteristics of a Monotectic Al-Bi-Cu Alloy |
7 |
| Effect of Zr Content on Mechanical Properties of Diamond/Cu-Zr Composites Produced by Gas Pressure Infiltration |
7 |
| Friction and Wear of Nanoadditive-Based Biolubricants in Steel-Steel Sliding Contacts: A Comparative Study |
7 |
| Effect of Wear on Surface Crack Propagation in Rail-Wheel Wet Contact |
7 |
| Influence of Melt-Pouring Temperature and Composition of Primary Coating of Shell Mold on Tensile Strength and Creep Resistance of Ni-Based Superalloy |
7 |
| Mechanical Integrity of Biodegradable Mg-HA Composite During In Vitro Exposure |
7 |
| Investigation on Microsegregation of IN718 Alloy During Additive Manufacturing via Integrated Phase-Field and Finite-Element Modeling |
7 |
| Experimental and Numerical Analysis of Liquid Metal Embrittlement Crack Location |
7 |
| AZ61 and AZ61-La Alloys as Anodes for Mg-Air Battery |
7 |
| Corrosion Inhibition of Pipeline Carbon Steel (N80) in CO2-Saturated Chloride (0.5 M of KCl) Solution Using Gum Arabic as a Possible Environmentally Friendly Corrosion Inhibitor for Shale Gas Industry |
7 |
| In Vitro Degradation, Antibacterial Activity and Cytotoxicity of Mg-3Zn-xAg Nanocomposites Synthesized by Mechanical Alloying for Implant Applications |
7 |
| Influence of Particle Size on the Basic and Time-Dependent Rheological Behaviors of Cemented Paste Backfill |
7 |
| Effects of Nb on Superelasticity and Low Modulus Properties of Metastable beta-Type Ti-Nb-Ta-Zr Biomedical Alloys |
6 |
| Electrochemical Properties of Commercially Pure Ti with TiB/TiB2 Coatings in Hanks' Balanced Salt Solution |
6 |
| Tribological and Corrosion Properties of Coatings Produced by Plasma Electrolytic Oxidation on the ZA27 Alloy |
6 |
| Effect of Process Parameters on the Mechanical Properties of Hastelloy X Alloy Fabricated by Selective Laser Melting |
6 |
| Microstructural Evolution and Properties of 24CrNiMoY Alloy Steel Fabricated by Selective Laser Melting |
6 |
| High Cycle Fatigue Performance in Laser Shock Peened TC4 Titanium Alloys Subjected to Foreign Object Damage |
6 |
