| RECOVERY AND SEPARATION OF IRON FROM IRON ORE USING INNOVATIVE FLUIDIZED MAGNETIZATION ROASTING AND MAGNETIC SEPARATION |
7 |
| COPPER MATTE - SLAG REACTION SEQUENCES AND SEPARATION PROCESSES IN MATTE SMELTING |
7 |
| CARBOTHERMIC REDUCTION OF MECHANICALLY ACTIVATED NiO-CARBON MIXTURE: NON-ISOTHERMAL KINETICS |
6 |
| CHLORINE CORROSION OF BLAST FURNACE GAS PIPELINES: ANALYSIS FROM THERMAL PERSPECTIVE |
6 |
| AB INITIO AND CALPHAD-TYPE THERMODYNAMIC INVESTIGATION OF THE Ti-Al-Zr SYSTEM |
6 |
| CHARACTERIZATION OF Ti6Al4V POWDERS PRODUCED BY DIFFERENT METHODS FOR SELECTIVE ELECTRON BEAM MELTING |
5 |
| TEMPERING OF DEFORMED AND AS-QUENCHED MARTENSITE IN STRUCTURAL STEEL |
4 |
| FORMATION MECHANISM OF Fe-Mo MASTER ALLOY BY ALUMINOTHERMIC REDUCTION OF MoS2 -Fe2O3 IN THE PRESENCE OF LIME |
4 |
| UPGRADING IRON AND REMOVING PHOSPHORUS OF HIGH PHOSPHORUS OOLITIC IRON ORE BY SEGREGATION ROASTING WITH CALCIUM CHLORIDE AND CALCIUM HYPOCHLORITE |
4 |
| EFFECT OF CaF2 SUBSTITUTION WITH TiO2 ON. THE CRYSTALLIZATION CHARACTERISTICS OF LOW-FLUORIDE SLAG FOR ELECTROSLAG REMELTING |
4 |
| IRON OXIDE RECOVERY FROM FAYALITE IN WATER VAPOR AT HIGH TEMPERATURE |
4 |
| CONTINUOUS COOLING TRANSFORMATION DIAGRAMS OF HSLA STEEL FOR SEAMLESS TUBES PRODUCTION |
3 |
| EFFECT OF ELECTROSLAG REMELTING ON THE NON-METALLIC INCLUSIONS IN H11 TOOL STEEL |
3 |
| EXTRACTING LITHIUM FROM A LITHIUM ALUMINATE COMPLEX BY VACUUM ALUMINOTHERMIC REDUCTION |
3 |
| ANALYSIS OF THE GROWTH KINETICS OF Fe2B LAYERS BY THE INTEGRAL METHOD |
3 |
| A SYSTEM OF ANALYSIS AND PREDICTION OF THE LOSS OF FORGING TOOL MATERIAL APPLYING ARTIFICIAL NEURAL NETWORKS |
3 |
| THERMODYNAMIC AND KINETICS ANALYSIS OF THE SULFUR-FIXED ROASTING OF ANTIMONY SULFIDE USING ZnO AS SULFUR-FIXING AGENT |
2 |
| SUPPORT ALGORITHM FOR BLAST FURNACE OPERATION WITH OPTIMAL FUEL CONSUMPTION |
2 |
| ATOMIC MOBILITY IN TITANIUM GRADE 5 (Ti6Al4V) |
2 |
| EFFECT OF ALLOYING ELEMENTS ON THE STACKING FAULT ENERGIES OF DILUTE AL-BASED ALLOYS |
2 |
| THE EFFECT OF COAL RATIO ON THE HIGH-LEAD SLAG REDUCTION PROCESS |
2 |
| INVESTIGATION OF THE STRUCTURE OF CaO-Al2O3-SiO2 MELTS AS A BASIS FOR THE DEVELOPMENT OF NEW AGGLOMERATED WELDING FLUXES AND INDUSTRIAL REFRACTORIES |
2 |
| INFLUENCE OF MECHANICAL ACTIVATION AND HEAT TREATMENT ON. MAGNETIC PROPERTIES OF NANOSTRUCTURED MIXTURE Ni85.8Fe10.6Cu2.2W1.4 |
2 |
| PREPARATION AND RECOVERY OF IRON CARBIDE FROM PYRITE CINDER USING CARBURIZATION-MAGNETIC SEPARATION TECHNOLOGY |
2 |
| COBALT AND COPPER RECOVERY FROM THE ANCIENT FLOTATION TAILINGS BY SELECTIVE SULFATION ROAST - LEACHING PROCESS |
2 |
| SPHEROIDIZATION HEAT TREATMENT AND INTERCRITICAL ANNEALING OF LOW CARBON STEEL |
2 |
| MINERAL PHASES IN IRON ORE SINTERS PRODUCED WITH OAK SAWDUST SUBSTITUTE FUEL |
2 |
| OPTIMIZED FATIGUE PERFORMANCE OF MARTENSITIC STAINLESS STEEL AISI 440C USING DEEP ROLLING INTEGRATED INTO HARDENING PROCESS |
2 |
| THERMODYNAMIC MODEING OF THE Hf-N SYSTEM |
1 |
| ANALYSIS OF NATURALLY ETCHED SURFACE OF BRASS SHEATHING FROM A NINETEENTH-CENTURY SHIPWRECK |
1 |
| CHARACTERIZATION AND PROCESS DEVELOPMENT FOR THE SELECTIVE REMOVAL OF Sn, Sb, AND As FROM ANODE SLIME OBTAINED FROM ELECTROLYTIC COPPER REFINING |
1 |
| REDUCTIVE-SULFURIZING SMELTING TREATMENT OF SMELTER SLAG FOR COPPER AND COBALT RECOVERY |
1 |
| NON-EQUILIBRIUM SOLIDIFICATION AND MICROSEGREGATION IN CENTRIFUGALLY CAST HIGH SPEED STEEL FOR ROLLS |
1 |
| EXPERIMENTAL CARBOTHERMAL REDUCTION OF MgO AT LOW PRESSURE USING CONCENTRATED SOLAR ENERGY |
1 |
| THE EFFECT OF ELECTROSLAG REMELTING ON THE CLEANLINESS OF CrNiMoWMnV ULTRAHIGH-STRENGTH STEELS |
1 |
| THE EFFECT OF CaO ON THE RECOVERY OF Fe AND Ni IN A VACUUM CARBOTHERMAL REDUCTION OF GARNIERITE |
1 |
| RECOVERY OF THE VALUABLE METALS FROM COMPLEX CONVERTER SLAG AT ELEVATED TEMPERATURE WITH SULFURIC ACID SOLUTION |
1 |
| FLUIDIZED BED ROASTING TECHNOLOGY IN IRON ORES DRESSING IN CHINA - A REVIEW ON EQUIPMENT DEVELOPMENT AND APPLICATION PROSPECT |
1 |
| INFLUENCE OF NICKEL ADDITION AND CASTING MODULUS ON THE PROPERTIES OF HYPO-EUTECTIC DUCTILE CAST IRON |
1 |
| THE EFFECT OF PLATINUM-ALUMINIDE COATING FEATURES ON HIGH-TEMPERATURE FATIGUE LIFE OF NICKEL-BASED SUPERALLOY RENE (R) 80 |
1 |
| MICROSTRUCTURE AND TRIBOLOGICAL BEHAVIOR OF W-Mo ALLOY COATING ON POWDER METALLURGY GEARS BASED ON DOUBLE GLOW PLASMA SURFACE ALLOYING TECHNOLOGY |
1 |
| MODELING AND EXPERIMENT OF SLAG CORROSION ON THE LIGHTWEIGHT ALUMINA REFRACTORY WITH STATIC MAGNETIC FIELD FACING GREEN METALLURGY |
1 |
| AN EFFECTIVE PROCESS FOR SIMULTANEOUS EXTRACTION OF VALUABLE METALS (V, Cr, Ti, Fe, Mn) FROM VANADIUM SLAG USING ACIDIC SODIUM CHLORATE SOLUTION UNDER WATER BATH CONDITIONS |
1 |
| PHYSICAL PROPERTIES OF NANOSTRUCTURED ZnO THIN FILMS DEPOSITED BY DC MAGNETRON SPUTTERING METHOD WITH DIFFERENT VOLUME OF O-2 IN A CARRIER GAS |
1 |
| REDUCTION BEHAVIOR OF Tin-CONTAINING PHASE IN Tin-BEARING IRON CONCENTRATES UNDER CO-CO2 MIXED GASES |
1 |
| EXPERIMENTAL INVESTIGATION AND THERMODYNAMIC CALCULATIONS OF THE Bi-Ni-Pb PHASE DIAGRAM |
1 |
| PREPARATION OF MgO ADDED IRON ORE PELLETS AND EFFECTS ON A PILOT SCALE BLAST FURNACE OPERATION |
1 |
| ISOTHERMAL SECTION OF THE Ni-Mn-Sb TERNARY SYSTEM AT 773K |
1 |
| ISOBARIC (VAPOUR plus LIQUID) EQUILIBRIA OF BINARY Pb-Sn AND Sb-Sn SYSTEM AT 2Pa |
1 |
| INVESTIGATION OF DISSOLUTION RESISTANCE OF BLANK AND GAS-NITRIDED CARBON STEELS IN STATIONARY SAC305 SOLDER ALLOY MELT |
1 |
