| Viability Assessment of a Concentrated Solar Power Tower With a Supercritical CO2 Brayton Cycle Power Plant |
21 |
| A Review on Different Design Modifications Employed in Inclined Solar Still for Enhancing the Productivity |
14 |
| Latent Heat Storage: Container Geometry, Enhancement Techniques, and Applications-A Review |
10 |
| Quantitative Assessment of Phase Change Material Utilization for Building Cooling Load Abatement in Composite Climatic Condition |
8 |
| Performance Investigation of a Triangular Solar Air Heater Duct Having Broken Inclined Roughness Using Computational Fluid Dynamics |
8 |
| Numerical Analysis of Heat Transfer Enhancement in a Parabolic Trough Collector Based on Geometry Modifications and Working Fluid Usage |
8 |
| Experimental Test of Properties of KCl-MgCl2 Eutectic Molten Salt for Heat Transfer and Thermal Storage Fluid in Concentrated Solar Power Systems |
7 |
| A Study of Wind Turbine Wakes in Complex Terrain Through RANS Simulation and SCADA Data |
7 |
| Solar Thermal Application for Decentralized Food Baking Using Scheffler Reflector Technology |
7 |
| Effectiveness of Phase Change Material for Cooling of Photovoltaic Panel for Hot Climate |
7 |
| Evolution and Progress in the Development of Savonius Wind Turbine Rotor Blade Profiles and Shapes |
6 |
| A Comparative Performance Study of Double Basin Single Slope Solar Still With and Without Using Nanoparticles |
6 |
| Efficiency Improvement of a Photovoltaic Module Using Front Surface Cooling Method in Summer and Winter Conditions |
6 |
| Sizing of Photovoltaic-Wind-Battery Hybrid System for a Mediterranean Island Community Based on Estimated and Measured Meteorological Data |
6 |
| Ducted Wind Turbine Optimization |
5 |
| Optimal Analysis of Entropy Generation and Heat Transfer in Parabolic Trough Collector Using Green-Synthesized TiO2/Water Nanofluids |
5 |
| Improving the Energy Conversion Efficiency of a Savonius Rotor Using Automatic Valves |
5 |
| Scenario-Based Multi-Objective Optimization of an Air-Based Building-Integrated Photovoltaic/Thermal System |
5 |
| A Comprehensive Review of Solar Milk Pasteurization System |
5 |
| Numerical Analysis of Flat Plate Solar Air Heater Integrated With an Array of Pin Fins on Absorber Plate for Enhancement in Thermal Performance |
5 |
| Energy and Exergy Analysis of Marquise Shaped Channel Flat Plate Solar Collector Using Al2O3-Water Nanofluid and Water |
5 |
| Evaluation of Alternative Designs for a High Temperature Particle-to-sCO(2) Heat Exchanger |
5 |
| Performance Evaluation of Combined Photovoltaic Thermal Water Cooling System for Hot Climate Regions |
4 |
| On the Use of Longitudinal Fins to Enhance the Performance in Rectangular Duct of Solar Air Heaters-A Review |
4 |
| Energetic and Exergetic Performance of a Solar Flat-Plate Collector Working With Cu Nanofluid |
4 |
| Sizing of a Photovoltaic-Wind-Oil Shale Hybrid System: Case Analysis in Jordan |
4 |
| Concept of Triple Heat Exchanger-Assisted Solar Pond Through an Improved Analytical Model |
4 |
| Experimental and Modeling Study on Solar System Using Linear Fresnel Lens and Thermoelectric Module |
4 |
| Prediction of Solar Photovoltaic/Thermal Collector Power Output Using Fuzzy Logic |
4 |
| Heat Transfer Model of a 50 kW Solar Receiver-Reactor for Thermochemical Redox Cycling Using Cerium Dioxide |
4 |
| Simulation of Flow and Heat Transfer in Triangular Cross-Sectional Solar-Assisted Air Heater |
4 |
| Drying Kinetics, Quality Assessment, and Economic Analysis of Bitter Gourd Flakes Drying Inside Forced Convection Greenhouse Dryer |
4 |
| Wind Effect Modeling and Analysis for Estimation of Photovoltaic Module Temperature |
3 |
| Thermal Performance Evaluation of Textile Waste as an Alternative Solution for Heat Transfer Reduction in Buildings |
3 |
| Investigation of Thermal Performance of a Solar Pond With External Heat Addition |
3 |
| Design and Development of a Fiber-Optic Hybrid Day-Lighting System |
3 |
| Optimal Hybrid Power Energy Systems for Residential Communities in Saudi Arabia |
3 |
| Design and Analysis of a Novel Integrated Wind-Solar-OTEC Energy System for Producing Hydrogen, Electricity, and Fresh Water |
3 |
| Analysis of Nanofluid-Based Parabolic Trough Collectors for Solar Thermal Applications |
3 |
| Optimal Placement and Sizing of Photovoltaic Based Distributed Generation Considering Costs of Operation Planning of Monocrystalline and Thin-Film Technologies |
3 |
| On Analyzing the Optical Performance of Solar Central Tower Systems on Hillsides Using Biomimetic Spiral Distribution |
3 |
| Characterization of a New 10 kW(e) High Flux Solar Simulator Via Indirect Radiation Mapping Technique |
3 |
| Performance Assessment of a Heat Recovery System for Monolithic Receiver-Reactors |
3 |
| Experimental Framework for Evaluation of the Thermodynamic and Kinetic Parameters of Metal-Oxides for Solar Thermochemical Fuel Production |
3 |
| Evaluation on the Performance of Photovoltaic-Thermal Hybrid System Using CO2 as a Working Fluid |
3 |
| Design of Phase Change Material Based Domestic Solar Cooking System for Both Indoor and Outdoor Cooking Applications |
3 |
| Exergy Analysis of a Flat Plate Solar Collector With Grooved Absorber Tube Configuration Using Aqueous ZnO-Ethylene Glycol |
3 |
| Integration of Soiling-Rate Measurements and Cleaning Strategies in Yield Analysis of Parabolic Trough Plants |
3 |
| Evaluation of the Effect of Spar Cap Fiber Angle of Bending-Torsion Coupled Blades on the Aero-Structural Performance of Wind Turbines |
3 |
| Thermal Modeling of a Rooftop Photovoltaic/Thermal System With Earth Air Heat Exchanger for Combined Power and Space Heating |
3 |
