| Poly(o-phenylenediamine) thin film for organic solar cell applications |
23 |
| Synthesis of Ni3V2O8@graphene oxide nanocomposite as an efficient electrode material for supercapacitor applications |
18 |
| Enhanced electrochemical performance of LiNi0.8Co0.1Mn0.1O2 cathode via wet-chemical coating of MgO |
17 |
| Synthesis and electrochemical investigation of spinel cobalt ferrite magnetic nanoparticles for supercapacitor application |
15 |
| Electrodes and hydrogel electrolytes based on cellulose: fabrication and characterization as EDLC components |
15 |
| Enhancement of the electrocatalytic oxidation of dyeing wastewater (reactive brilliant blue KN-R) over the Ce-modified Ti-PbO2 electrode with surface hydrophobicity |
14 |
| Electrolyte for energy storage/conversion (Li+, Na+, Mg2+) devices based on PVC and their associated polymer: a comprehensive review |
13 |
| Application of TiO2-nanotubes/PbO2 as an anode for the electrochemical elimination of Acid Red 1 dye |
13 |
| Lithium garnet based free-standing solid polymer composite membrane for rechargeable lithium battery |
13 |
| Synthesis and characterization of bio-polymer electrolyte based on iota-carrageenan with ammonium thiocyanate and its applications |
13 |
| A high-performance and environment-friendly gel polymer electrolyte for lithium ion battery based on composited lignin membrane |
12 |
| Photoelectrocatalytic performance of conductive carbon black-modified Ti/F-PbO2 anode for degradation of dye wastewater (reactive brilliant blue KN-R) |
12 |
| Electrochemical performance of carbon paper supercapacitor using sodium molybdate gel polymer electrolyte and nickel molybdate electrode |
11 |
| Effects of indium, gallium, or bismuth additions on the discharge behavior of Al-Mg-Sn-based alloy for Al-air battery anodes in NaOH electrolytes |
11 |
| Influence of synthesis temperature on cobalt metal-organic framework (Co-MOF) formation and its electrochemical performance towards supercapacitor electrodes |
11 |
| MOF-derived binary mixed carbon/metal oxide porous materials for constructing simultaneous determination of hydroquinone and catechol sensor |
11 |
| Evaluation of graphene oxide and reduced graphene oxide in the immobilization of laccase enzyme and its application in the determination of dopamine |
10 |
| Processes associated with ionic current rectification at a 2D-titanate nanosheet deposit on a microhole poly(ethylene terephthalate) substrate |
9 |
| Applications of carbon in lead-acid batteries: a review |
9 |
| Effect of Mg content on discharge behavior of Al-0.05Ga-0.05Sn-0.05Pb-xMg alloy anode for aluminum-air battery |
9 |
| In situ X-ray absorption fine structure studies of amorphous and crystalline polyoxovanadate cluster cathodes for lithium batteries |
8 |
| Decolourisation of reactive black-5 at an RVC substrate decorated with PbO2/TiO2 nanosheets prepared by anodic electrodeposition |
8 |
| Electrochemical deposition of poly[ethylene-dioxythiophene] (PEDOT) films on ITO electrodes for organic photovoltaic cells: control of morphology, thickness, and electronic properties |
8 |
| Carbon fiber-bridged polyaniline/graphene paper electrode for a highly foldable all-solid-state supercapacitor |
8 |
| Zirconia fiber membranes based on PVDF as high-safety separators for lithium-ion batteries using a papermaking method |
8 |
| One-pot synthesis of copper nanoparticles on glass: applications for non-enzymatic glucose detection and catalytic reduction of 4-nitrophenol |
8 |
| Electrical bistability and memory switching phenomenon in Cu2FeSnS4 thin films: role of p-n junction |
8 |
| Single-frequency impedance analysis of biofunctionalized dendrimer-encapsulated Pt nanoparticles-modified screen-printed electrode for biomolecular detection |
7 |
| Influence of constant magnetic field on electrodeposition of metals, alloys, conductive polymers, and organic reactions |
7 |
| Ion and solvent transfer of polyaniline films electrodeposited from deep eutectic solvents via EQCM |
7 |
| Rational design of double-confined Mn2O3/S@Al2O3 nanocube cathodes for lithium-sulfur batteries |
7 |
| Effect of the soft and hard segment composition on the properties of waterborne polyurethane-based solid polymer electrolyte for lithium ion batteries |
7 |
| NiO/CNTs derived from metal-organic frameworks as superior anode material for lithium-ion batteries |
7 |
| Electrocatalysis of polysulfide conversion via sulfur-cobalt CoS2 on a carbon nanotube surface as a cathode for high-performance lithium-sulfur batteries |
7 |
| The synergistic effect between graphene oxide nanocolloids and silicon dioxide nanoparticles for gallic acid sensing |
7 |
| A comment on the need to distinguish between cell and electrode impedances |
7 |
| Use of poly[ionic liquid] as a conductive binder in lithium ion batteries |
7 |
| Electrochromic and electrochemical properties of copolymer films based on EDOT and phenylthiophene derivatives |
7 |
| Adsorption and diffusion on a phosphorene monolayer: a DFT study |
7 |
| Thermodynamic considerations of screening halide molten-salt electrolytes for electrochemical reduction of solid oxides/sulfides |
7 |
| A battery-supercapacitor hybrid device composed of metallic zinc, a biodegradable ionic liquid electrolyte and graphite |
7 |
| CoNi-embedded nitrogen-enriched porous carbon framework for long-life lithium-sulfur batteries |
7 |
| One-step synthesis of an octahedral Mn3O4/rGO composite for use as an electrocatalyst in the oxygen reduction reaction |
7 |
| Electrochemical co-reduction of Y(III) and Zn(II) and extraction of yttrium on Zn electrode in LiCl-KCl eutectic melts |
7 |
| Voltammetric determination of 17 beta-estradiol in human urine and buttermilk samples using a simple copper(II) oxide-modified carbon paste electrode |
7 |
| Immunosensor for electrodetection of the C-reactive protein in serum |
7 |
| Electrochemical sensor for estriol hormone detection in biological and environmental samples |
7 |
| Alachlor removal performance of Ti/Ru0.3Ti0.7O2 anodes prepared from ionic liquid solution |
7 |
| Acrylonitrile-butadiene-styrene (ABS) composite electrode for the simultaneous determination of vitamins B-2 and B-6 in pharmaceutical samples |
7 |
| Interlayer-expanded MoS2/graphene composites as anode materials for high-performance lithium-ion batteries |
7 |
