| Experimental Testing and Evaluation of Neat Biodiesel and Heptanol Blends in Diesel Engine |
20 |
| Smart Cement Compressive Piezoresistive, Stress-Strain, and Strength Behavior with Nanosilica Modification |
12 |
| Simulated Road Profiles According to ISO 8608 in Vibration Analysis |
10 |
| On Comparing Two Dependent Linear and Nonlinear Regression Models |
9 |
| Mechanical, Microstructural and Thermal Characterization of Epoxy-Based Human Hair-Reinforced Composites |
9 |
| Modeling of Permeation and Fracturing Grouting in Sand: Laboratory Investigations |
7 |
| Water Immersion-Induced Strength Performance of Solidified Soils with Reactive MgO-A Green and Low Carbon Binder |
6 |
| Machine Repair System with F-Policy, Two Unreliable Servers, and Warm Standbys |
6 |
| On the Mechanical Behavior of Granite Material With Particular Emphasis on the Influence From Pre-Existing Cracks and Defects |
6 |
| Performance Evaluation of Warm-Mix Recycled Asphalt Binders after Long-Term Aging |
5 |
| Performance of the Variable Parameters (X)over-bar Control Chart in Presence of Measurement Errors |
5 |
| Dynamic Response of Shallow-Buried Tunnels under Asymmetrical Pressure Distributions |
5 |
| Utilizing Digital Image Correlation (DIC) in Asphalt Pavement Testing |
5 |
| Evaluation of Nano-ZnO Dispersed State in Bitumen with Digital Imaging Processing Techniques |
5 |
| Relationship Between Machinability, Microstructure, and Mechanical Properties of Al-7Si Alloy |
5 |
| Comparative Study of RC Members with Strengthening Using Strain Hardening Cementitious Composite and Fiber Reinforced Mortar |
5 |
| Utilization of Fine Solid Waste in Asphalt Mortar |
5 |
| Robot Evaluation and Selection Using the Hesitant Fuzzy Linguistic MULTIMOORA Method |
4 |
| The Energy-Saving of Urban Tunnel Ventilation Based on the Investigation of the Annual Discount Rate of CO Baseline Emission in City of Shenzhen |
4 |
| Reacted and Activated Rubber (RAR)-Modified Dense-Graded Asphalt Mixtures: Design and Performance Evaluation |
4 |
| Characteristic Analysis of Welding Crack Acoustic Emission Signals Using Synchrosqueezed Wavelet Transform |
4 |
| A New Method for Direct Tensile Testing of Concrete |
4 |
| Cracking Behaviors of Rock-Like Specimens Containing Two Sets of Preexisting Cross Flaws under Uniaxial Compression |
4 |
| Evaluation of Synthetic Fiber Reinforced Concrete Pipe Performance Using Three-Edge Bearing Test |
4 |
| Using a Polymer-Based Sealant Material to Make Crack Repair of Asphalt Pavement |
4 |
| Investigation of Carbonyl of Asphalt Binders Containing Antiaging Agents and Waste Cooking Oil Using FTIR Spectroscopy |
4 |
| Effect of Closely Spaced Twin Tunnel Construction beneath an Existing Subway Station: A Case Study |
4 |
| Experimental Study on Lime and Fly Ash-Stabilized Sintered Red Mud in Road Base |
4 |
| Experimental Study on the Impact Properties of Concrete Bridge Pier Reinforced with Stainless Steel Rebar |
4 |
| Effects of Process Parameters on the Surface Roughness of Stainless Steel 316L Parts Produced by Selective Laser Melting |
4 |
| Micromechanical Simulation of Influence Factors of Indirect Tensile Test of Asphalt Mixture |
3 |
| Effect of Waste Human Hair Fibers on Shear Behavior of Sand in Dry and Saturated Conditions |
3 |
| Experimental Investigation on Lemongrass Oil Water Emulsion in Low Heat Rejection Direct Ignition Diesel Engine |
3 |
| New Design Method of Asphalt Mixtures Considering Uncertainty |
3 |
| Laboratory Investigation of Microsurfacing Asphalt Modified with Nanosilica and Nanoclay Combined with Polyethylene Fibers |
3 |
| Optimization of Laboratory Preparation of the Emulsified Bioasphalt with Two Emulsifiers |
3 |
| Seismic Isolation Characteristics of a Friction System |
3 |
| Experimental and 3-D Finite Element Analyses on Geocell-Reinforced Embankments |
3 |
| Fragmentation Evolution and Fractal Characteristics of Deep Rocks by Lab Compression-Shear Tests |
3 |
| Earthquake Isolation of a Spring-Damper-Friction System with a Convex Friction Distribution |
3 |
| Assessment of Hazardous Substances in Electrical Cables: Implementation of RoHS Regulations in India |
3 |
| Mixed Mode I/II Fracture Strength of Modified HMA Concretes Subjected to Different Temperature Conditions |
3 |
| Fracture Resistance of HMA Mixtures Modified with Nanoclay and Nano-Al2O3 |
3 |
| Numerical Simulation and Laboratory Testing Verification on the Performance of an Asphalt Pavement Seal Coat with Superficially Permeating and Solidifying Properties |
3 |
| Diagnosis of Photovoltaic (PV) Panel Defects Based on Testing and Evaluation of Thermal Image |
3 |
| Development and Application of the New Explosive Loading Experimental System of Digital Laser Dynamic Caustics |
3 |
| The Surface Tension of Synthetic Blood Used for ASTM F1670 Penetration Tests |
3 |
| An Experimental Study on the Effects of Adding Steel and Polypropylene Fibers to Concrete on Its Resistance after Different Temperatures |
3 |
| Production of Garcinia gummi-gutta Methyl Ester (GGME) as a Potential Alternative Feedstock for Existing Unmodified DI Diesel Engine: Combustion, Performance, and Emission Characteristics |
3 |
| Prediction of Mechanical Performance of Cemented Paste Backfill by the Electrical Resistivity Measurement |
3 |
