| Review-Organic-Inorganic Hybrid Functional Materials: An Integrated Platform for Applied Technologies |
63 |
| Effect of Ambient Storage on the Degradation of Ni-Rich Positive Electrode Materials (NMC811) for Li-Ion Batteries |
61 |
| Is Cobalt Needed in Ni-Rich Positive Electrode Materials for Lithium Ion Batteries? |
49 |
| Nickel, Manganese, and Cobalt Dissolution from Ni-Rich NMC and Their Effects on NMC622-Graphite Cell |
45 |
| A Wide Range of Testing Results on an Excellent Lithium-Ion Cell Chemistry to be used as Benchmarks for New Battery Technologies |
44 |
| Review-Li Metal Anode in Working Lithium-Sulfur Batteries |
41 |
| Lithium Mechanics: Roles of Strain Rate and Temperature and Implications for Lithium Metal Batteries |
41 |
| A Study of the Physical Properties of Li-Ion Battery Electrolytes Containing Esters |
37 |
| Updating the Structure and Electrochemistry of LixNiO2 for 0 <= x <= 1 |
36 |
| Composite Poly(norbornene) Anion Conducting Membranes for Achieving Durability, Water Management and High Power (3.4 W/cm(2)) in Hydrogen/Oxygen Alkaline Fuel Cells |
36 |
| Synthesis of Single Crystal LiNi0.6Mn0.2Co0.2O2 with Enhanced Electrochemical Performance for Lithium Ion Batteries |
36 |
| Factors Limiting Li+ Charge Transfer Kinetics in Li-Ion Batteries |
36 |
| Requirements for Enabling Extreme Fast Charging of High Energy Density Li-Ion Cells while Avoiding Lithium Plating |
35 |
| Analysis of Voltage Losses in PEM Water Electrolyzers with Low Platinum Group Metal Loadings |
35 |
| Review-Recent Developments on Graphene-Based Electrochemical Sensors toward Nitrite |
35 |
| Lithium Metal Penetration Induced by Electrodeposition through Solid Electrolytes: Example in Single-Crystal Li6La3ZrTaO12 Garnet |
35 |
| Depth-Dependent Redox Behavior of LiNi0.6Mn0.2Co0.2O2 |
34 |
| Carbon Corrosion in PEM Fuel Cells and the Development of Accelerated Stress Tests |
34 |
| The Effect of Electrode-Electrolyte Interface on the Electrochemical Impedance Spectra for Positive Electrode in Li-Ion Battery |
32 |
| Method Comparison for Deconvoluting Capacitive and Pseudo-Capacitive Contributions to Electrochemical Capacitor Electrode Behavior |
32 |
| Review-Solid Electrolytes for Safe and High Energy Density Lithium-Sulfur Batteries: Promises and Challenges |
32 |
| Resolving the Discrepancy in Tortuosity Factor Estimation for Li-Ion Battery Electrodes through Micro-Macro Modeling and Experiment |
31 |
| Exploring the Impact of Mechanical Pressure on the Performance of Anode-Free Lithium Metal Cells |
31 |
| Determination of Diffusion Coefficients Using Impedance Spectroscopy Data |
29 |
| Electro-Catalytic Behavior of Mg-Doped ZnO Nano-Flakes for Oxidation of Anti-Inflammatory Drug |
29 |
| How Observable Is Lithium Plating? Differential Voltage Analysis to Identify and Quantify Lithium Plating Following Fast Charging of Cold Lithium-Ion Batteries |
27 |
| Control of Growth Mechanism of Electrodeposited Nanocrystalline NiFe Films |
27 |
| CuO-CNT Nanocomposite/Ionic Liquid Modified Sensor as New Breast Anticancer Approach for Determination of Doxorubicin and 5-Fluorouracil Drugs |
27 |
| Microwave Hydrothermal Synthesis of In2O3-ZnO Nanocomposites and Their Enhanced Photoelectrochemical Properties |
26 |
| Flow Battery Molecular Reactant Stability Determined by Symmetric Cell Cycling Methods |
26 |
| Impact of Pore Tortuosity on Electrode Kinetics in Lithium Battery Electrodes: Study in Directionally Freeze-Cast LiNi0.8Co0.15Al0.05O2 (NCA) |
26 |
| XPS-Surface Analysis of SEI Layers on Li-Ion Cathodes: Part II. SEI-Composition and Formation inside Composite Electrodes |
25 |
| Water-in-Salt for Supercapacitors: A Compromise between Voltage, Power Density, Energy Density and Stability |
24 |
| Intermetallic Phases in Aluminum Alloys and Their Roles in Localized Corrosion |
24 |
| Energy Density of Cylindrical Li-Ion Cells: A Comparison of Commercial 18650 to the 21700 Cells |
24 |
| Fabrication of 3D Expanded Graphite-Based (MnO2 Nanowalls and PANI Nanofibers) Hybrid as Bifunctional Material for High-Performance Supercapacitor and Sensor |
24 |
| Reduction Reactions of Electrolyte Salts for Lithium Ion Batteries: LiPF LiBF LiDFOB, LiBOB, and LiTFSI |
24 |
| Commercializing Lithium Sulfur Batteries: Are We Doing the Right Research? |
23 |
| Core-Shell Nanoparticles/Two-Dimensional (2D) Hexagonal Boron Nitride Nanosheets with Molecularly Imprinted Polymer for Electrochemical Sensing of Cypermethrin |
23 |
| Structural Modification of V2O5 as High-Performance Aqueous Zinc-Ion Battery Cathode |
23 |
| Mesoscale Analysis of Conductive Binder Domain Morphology in Lithium-Ion Battery Electrodes |
23 |
| CO2 Electrolysis to CO and O-2 at High Selectivity, Stability and Efficiency Using Sustainion Membranes |
23 |
| Review-Ammonia Oxidation Electrocatalysis for Hydrogen Generation and Fuel Cells |
23 |
| Practical Aspects of Cyclic Voltammetry: How to Estimate Reduction Potentials When Irreversibility Prevails |
23 |
| Gold Nanoparticles/Two-Dimensional (2D) Hexagonal Boron Nitride Nanosheets Including Diethylstilbestrol Imprinted Polymer: Electrochemical Detection in Urine Samples and Validation |
22 |
| Mechanism of Thermal Runaway in Lithium-Ion Cells |
21 |
| Tortuosity of Battery Electrodes: Validation of Impedance-Derived Values and Critical Comparison with 3D Tomography |
21 |
| Beyond 1.0 W cm(-2) Performance without Platinum: The Beginning of a New Era in Anion Exchange Membrane Fuel Cells |
21 |
| Ambient Storage Derived Surface Contamination of NCM811 and NCM111: Performance Implications and Mitigation Strategies |
21 |
| Fast Charging of Li-Ion Cells: Part I. Using Li/Cu Reference Electrodes to Probe Individual Electrode Potentials |
21 |
