| Thermohydraulic performance evaluation of heat exchangers equipped with centrally perforated twisted tape: Laminar and turbulent flows |
4 |
| Investigation on the effect of fractal soot aggregation on radiative transfer in homogeneous gas-soot mixture using full-spectrum k-distribution method |
3 |
| Performance evaluation of a battery-cooling system using phase-change materials and heat pipes for electric vehicles under the short-circuited battery condition |
2 |
| Implementation of thermal and fuel stratification strategies to extend the load limit of HCCI engine |
2 |
| Numerical simulation on the thermal performance enhancement of energy storage tank with phase change materials |
2 |
| Thermodynamic performance analysis of the double effect absorption-vapour compression cascade refrigeration cycle |
2 |
| Effect of axial conduction on heat transfer in a rectangular microchannel with local heat flux |
2 |
| Magnetoconvection and entropy generation of nanofluid in an enclosure with an isothermal block: Performance evaluation criteria analysis |
2 |
| Research on coupled heat transfer of film cooling in LOX/GH(2) thrust chambers |
1 |
| Thermodynamic evaluation of open cycle gas turbines with carbon-free fuels H-2 and NH3 at high temperatures |
1 |
| Oxygen chemisorption and low-temperature oxidation behaviors of sub-bituminous coal |
1 |
| Large eddy simulation of film cooling on turbine vane |
1 |
| Thermo-physical evaluation of dielectric mineral oil-based nitride and oxide nanofluids for thermal transport applications |
1 |
| Estimation of radiative heat transfer and phase change in participating medium from TD radiation measurement signals with PCA approach |
1 |
| OH planar laser-induced fluorescence measurement for H-2/O-2 jet diffusion flames in rocket combustion condition up to 7.0 MPa |
1 |
| Shape optimization of a bended film-cooling hole to enhance cooling effectiveness |
1 |
| Development of a water-cooled multi-hole calibration burner for optical measurements of flames with high pressures and temperatures |
1 |
| Effect of geometrical parameters on turbulent flow and heat transfer behaviors in triple-start corrugated tubes |
1 |
| Analytical solutions to hyperbolic heat conductive models using Green's function method |
1 |
| Wall heat flux measurements in a GO(2)/GH(2) heat-sink combustion chamber |
1 |
| Development and verification of a supersonic nozzle with a rectangular cross section at a Mach number of 2.8 for a scramjet model combustor |
1 |
| Total temperature estimation of a hydrogen/air burned-gas torch igniter for a scramjet combustor |
1 |
| Numerical investigation of internal crossflow effects on film cooling performance at turbine blade suction surface |
1 |
| Multi-field coupling analysis on the film-cooling with transverse and arched trenches |
1 |
| Comparative study of fluid flow and heat transfer between usual fluids and nanofluids in a heated horizontal pipe |
0 |
| Intelligent predetermined control method for sinusoidal temperature testing on a cylindrical environmental chamber |
0 |
| Investigations of the leakage characteristic and the sealing effectiveness on turbine bite rim seals |
0 |
| Effective dynamic prediction of air conditions within car cabin via bilateral analyses of theoretical models and artificial neural networks |
0 |
| Oxygen combustion of CH4-CO2 mixture in a small-scale counterflow burner |
0 |
| Numerical investigation on a travelling wave thermoacoustic heat pump |
0 |
| Effect of wavelength of sinusoidal wavy wall surface on drag and heat transfer at turbulent thermal boundary layer flow |
0 |
| Scale model experiments for evaluation of liquid water transport in the gas diffusion layer of PEFCs |
0 |
| Evaluation on cooling performance and reliability of low-height aluminum thermosyphon in high-temperature environment |
0 |
| Numerical investigation on unstable behaviors of cellular premixed flames at low Lewis numbers based on the diffusive-thermal model and compressible Navier-Stokes equations |
0 |
| Utilization of transport of species and heat release to a DRG-method-based reduction |
0 |
| Physical instability suppression of microencapsulated phase change material(MPCM) suspensions |
0 |
| Airside heat transfer and pressure drop of louver-finned parallel flow heat exchanger having a drainage channel |
0 |
| Experimental investigation of spray cooling performance with enhanced heating surface structures |
0 |
| Three-dimensional microstructure of frost layer measured by using X-ray mu CT |
0 |
| Development of measurement technique of mass diffusion coefficient of aqueous methanol solutions in polymer electrolyte membranes based on infrared Soret forced Rayleigh scattering method using single crystal diamond window in a sample cell |
0 |
| Unsteady three-dimensional computations and experiments of compression flow formed by collision of supermulti-jets |
0 |
| Heat transfer enhancement of a loop thermosyphon with a hydrophobic spot-coated surface |
0 |
| Flow field and flame surface density of turbulent flames by simultaneous PIV/OH-PLIF measurements |
0 |
| Modification on prediction method of heat transfer coefficient from a vertical-finite-length cylinder in saturated film boiling to discuss local heat transfer performance near the lower corner |
0 |
| Dynamic response of wall-stagnating lean methane-air premixed flame to equivalence ratio oscillation |
0 |
| Laboratory investigations and numerical analysis of thermal performance of the single U-tube VBHE in multiple-layer substrates |
0 |
| Heat-transfer performance of a cooling tube with an obstacle for protection under frosting conditions |
0 |
| Impact of microcapsules wettability on thermal conductivity of microencapsulated phase change material(MPCM) suspensions |
0 |
| Performance of Curzon-Ahlborn engine along with its engine speed and compression ratio |
0 |
| Energy-loss mechanism of boilers system in large-scale coal-fired power plants and the corresponding energy-saving approaches |
0 |
