| A physical view of computational neurodynamics |
38 |
| Synchronization stability between initial-dependent oscillators with periodical and chaotic oscillation |
19 |
| A numerical investigation of the flow of nanofluids through a micro Tesla valve |
16 |
| The overall layout of rocket-based combined-cycle engines: a review |
10 |
| Mode transition process in a typical strut-based scramjet combustor based on a parametric study |
8 |
| Experimental and numerical investigation of flow forces in a seat valve using a damping sleeve with orifices |
7 |
| Critical penetration condition and Ekman suction-extraction mechanism of a sink vortex |
7 |
| Numerical research on the anti-sloshing effect of a ring baffle in an independent type C LNG tank |
7 |
| Urban railway ground vibrations induced by localized defects: using dynamic vibration absorbers as amitigation solution |
6 |
| Wear performance of metal parts fabricated by selective laser melting: a literature review |
6 |
| An overview of fluid-structure interaction experiments in single-elbow pipe systems |
5 |
| Stagnation point flow and heat transfer past a permeable stretching/shrinking Riga plate with velocity slip and radiation effects |
5 |
| Condition-based scheduled maintenance optimization of structures based on reliability requirements under continuous degradation and random shocks |
5 |
| Environmental impact assessment of ecological migration in China: a survey of immigrant resettlement regions |
5 |
| Novel integration methodology for an inward turning waverider forebody/inlet |
5 |
| Heat generation and transfer in automotive dry clutch engagement |
5 |
| Discrete element analysis of a cross-river tunnel under random vibration levels induced by trains operating during the flood season |
4 |
| Design and numerical simulation of a clamshell-shaped inlet cover for air-breathing hypersonic vehicles |
4 |
| Tuning bandgaps in metastructured beams: numerical and experimental study |
4 |
| Numerical and experimental investigation of damping in a dam-break problem with fluid-structure interaction |
4 |
| Hypoplasticmodeling of soil-structure interfaces in offshore applications |
4 |
| Characteristics of mixing enhancement achieved using a pulsed plasma synthetic jet in a supersonic flow |
4 |
| Designing Pd-based supported bimetallic catalysts for environmental applications |
4 |
| Co-benefit of hazardous trace elements capture in dust removal devices of ultra-low emission coal-fired power plants |
4 |
| Influence of substrate surface morphology on wetting behavior of tracks during selective laser melting of aluminum-based alloys |
4 |
| Bounded adaptive output feedback tracking control for flexible-joint robot manipulators |
3 |
| Development of natural gas liquefaction processes using mixed refrigerants: a review of featured process configurations and performance |
3 |
| Influence of wet-dry cycles on vertical cutoff walls made of reactive magnesia-slag-bentonite-soil mixtures |
3 |
| Grafting of nano-silica onto ramie fiber for enhanced mechanical and interfacial properties of ramie/epoxy composite |
3 |
| Local loss model of dividing flow in a bifurcate tunnel with a small angle |
3 |
| Role of the pore-size distribution function on water flow in unsaturated soil |
3 |
| Bearing capacity and failure mechanism of ground improved by deep mixed columns |
3 |
| Modelling and validation of a roller-cam rail mechanism used in a 2D piston pump |
3 |
| Engineered metabarrier as shield from longitudinal waves: band gap properties and optimization mechanisms |
3 |
| A review of key parameters for effective electrophoretic deposition in the fabrication of solid oxide fuel cells |
2 |
| Comparison of different cellular structures for the design of selective laser melting parts through the application of a new lightweight parametric optimisation method |
2 |
| Numerical study on the dynamic response of a massive liquefied natural gas outer tank under impact loading |
2 |
| Parameters optimization of a parallel-flow heat exchanger with a new type of anti-vibration baffle and coiled wire using Taguchi method |
2 |
| Analysis of pressure and flow compound control characteristics of an independent metering hydraulic system based on a two-level fuzzy controller |
2 |
| Group effect in piles under eccentric lateral loading in sand |
2 |
| EPR-RCGA-based modelling of compression index and RMSE-AIC-BIC-based model selection for Chinese marine clays and their engineering application |
2 |
| Automated impact device with non-synchronous impacts: a practical solution for modal testing during operation |
2 |
| Continuum damage modeling and progressive failure analysis of a Type III composite vessel by considering the effect of autofrettage |
2 |
| Variable bead width of material extrusion-based additive manufacturing |
2 |
| Thermo-mechanical behaviour of floating energy pile groups in sand |
2 |
| A strength degradation model of saturated soft clay and its application in caisson breakwater |
2 |
| Enhanced compressive performance of concrete via 3D-printing reinforcement |
2 |
| Parameters of a discrete element ballasted bed model based on a response surface method |
2 |
| Structural design and analysis of a composite wing with high aspect ratio |
2 |
| Recent advances in dust collection technology and ISO standardization in bag filtration |
2 |
