| Ionic liquids-based magnetic nanofluids as lubricants |
8 |
| Role of size of hexagonal boron nitride particles on tribo-performance of nano and micro oils |
8 |
| A contribution to the thermal effects of DLC coatings on fluid friction in EHL contacts |
7 |
| Tribological behaviour of SnO2 nanoparticles as an oil additive on brass |
7 |
| Tribological performance of oil-based ZnO and diamond nanofluids |
7 |
| Combined experimental and multiphase computational fluid dynamics analysis of surface textured journal bearings in mixed regime of lubrication |
7 |
| Tribological evaluation of calcium-copper-titanate/cerium oxide-based nanolubricants in sliding contact |
7 |
| Growth of adsorbed additive layer for further friction reduction |
6 |
| Preparation and tribological properties of chemically decorated MoS2 nanosheets with oleic diethanolamide |
4 |
| Wear particle classification using genetic programming evolved features |
4 |
| The purification and tribological property of the synthetic magnesium silicate hydroxide modified by oleic acid |
3 |
| Effect of dispersant on nano-PTFE: Striking the balance between stability and tribo-performance |
3 |
| Tribocorrosion of different biomaterials under reciprocating sliding conditions in artificial saliva |
3 |
| Comparison of the oxidation resistance of synthetic ester oils DOA and TDTM: Experimental evaluation and theoretical calculation |
3 |
| Effect of displacement amplitude on fretting wear of 304 stainless steel in air and sea water |
3 |
| Study on the thickness of lubricating film of M50-Ag self-lubricating composites |
3 |
| A field test method to quantitatively determine oxidation stability of gasoline engine oil |
2 |
| In situ formed ionic liquids in lard oil as high-performance lubricants for steel/steel contacts at elevated temperature |
2 |
| The thermocapillary migration on rough surfaces |
2 |
| Experimental and quantum chemical investigations on the oxidative stability of sesame oil base stock with synthetic antioxidant additives |
2 |
| Characterising the friction and wear behaviour of lubricated metal-metal pairings with an optical online particle detection system |
2 |
| Effect of the static pressure on the power dissipation of gearboxes |
2 |
| Micro morphological observation and mechanism analysis of boundary layer evolution in mixed powder lubrication |
2 |
| An appraisal of the thermal decomposition mechanisms of ILs as potential lubricants |
2 |
| Film building in circular EHL contact lubricated by oil droplet groups |
2 |
| Synthesis of ionic liquids with multifunctional tribological properties as excellent single-component package additives for turbine oils |
2 |
| Influences of cutting fluid conditions and cutting parameters on surface integrity of Inconel 718 under high-pressure jet-assisted machining (HPJAM) |
2 |
| Mixed EHL analysis of planetary drives with small teeth number difference considering real tooth geometry |
2 |
| Synergistic effects of phosphate ionic liquids and octadecylaminen-oleoyl sarcosinate as lubricating grease additives |
1 |
| Synthesis and antiwear properties of dicarboxylic acid derivatives containing dialkyl dithiophosphate groups |
1 |
| Friction performance of MoDTP and ester-containing lubricants between CKS piston ring and cast iron cylinder liner |
1 |
| Effect of magnetic field on tribological performances of two lubricating oils with phosphorus-containing additives |
1 |
| The tribological properties of the polyurea greases based on oil-miscible phosphonium-based ionic liquids |
1 |
| Enhanced lubricity of zinc phosphate coating by stearic acid |
1 |
| Automatic transmission fluid corrosion inhibitor interactions with copper |
1 |
| Effect of microtexturing on powder boundary layer: An experimental study based on laser microscopy and profilometry measurements |
1 |
| A finite element simulation of MOM (metal-on-metal) hip implant |
1 |
| A dynamic and tribological simulation of a monolayer graphene sheet for a carbon atom-graphene contact |
1 |
| Effect of topography parameter, load, and surface roughness on friction coefficient in mixed lubrication regime |
1 |
| Thermal elastohydrodynamic lubrication analysis of helical gear pair under starved lubrication condition |
1 |
| Tribological research of leaf-surface wax derived from plants of Pinaceae |
1 |
| Effect of electrochemical potential on the corrosive wear behavior of 5052 aluminum alloy in 0.5 M NaCl solution |
1 |
| Study on geometric contact model of elastohydrodynamic lubrication of arbitrary intersecting line gear |
1 |
| Tribological behavior of zirconium phosphate-4-dimethylpiperazine compound as lubricant additives |
1 |
| Tribological characterisation of plant oil derived fatty acid esters of higher polyols: Comparative experimental study |
1 |
| Synergy of two fatty acids as additives on lubricity of a nematic liquid crystal 5CB |
1 |
| Solid lubrication in fluid film lubrication |
1 |
| Influence of squeezing and interface slippage on the performance of water-lubricated tilting-pad thrust bearing during start-up and shutdown |
1 |
| A simple 3-dimensional model to analyse wheel-rail adhesion under wet condition |
1 |
| Analysis of couple-stress effects in gas foil bearings using the V. K. Stokes micro-continuum theory |
1 |
