| Coast/breakwater-integrated OWC: A theoretical model |
22 |
| Corrosion behaviour of aluminium alloys in deep-sea environment: A review and the KM3NeT test results |
15 |
| The influence of the inner steel tube on the compression behaviour of the concrete filled double skin steel tube (CFDST) columns |
14 |
| Review of experiments and calculation procedures for ship collision and grounding damage |
13 |
| Mechanical performances of stiffened and reinforced concrete-filled steel tubes under axial compression |
13 |
| Analytical behavior of carbon steel-concrete-stainless steel double-skin tube (DST) used in submarine pipeline structure |
13 |
| A numerical simulation method for predicting global and local hydroelastic response of a ship based on CFD and FEA coupling |
13 |
| Characteristics of global waves based on the third-generation wave model SWAN |
13 |
| Experimental and numerical analyses on the dynamic response of aluminum foam core sandwich panels subjected to localized air blast loading |
12 |
| Multi-mode flow-induced vibrations of two side-by-side slender flexible cylinders in a uniform flow |
12 |
| Full-field analysis of AL/FE explosive welded joints for shipbuilding applications |
11 |
| Vibration behavior of metallic sandwich panels with Hourglass truss cores |
11 |
| Finite element modelling of concrete-filled double-skin short compression members with CHS outer and SHS inner tubes |
11 |
| Materials selection for XL wind turbine support structures: A corrosion-fatigue perspective |
10 |
| Environmental contours based on inverse SORM |
10 |
| Strength assessment of an intact and damaged container ship subjected to asymmetrical bending loadings |
10 |
| Probabilistic examination of the change in eigenfrequencies of an offshore wind turbine under progressive scour incorporating soil spatial variability |
9 |
| Ultimate strength analysis of a SWATH ship subjected to transverse loads |
9 |
| Numerical simulation of vortex-induced vibration of a circular cylinder with different surface roughnesses |
9 |
| A macro-element for integrated time domain analyses representing bucket foundations for offshore wind turbines |
9 |
| Localised upheaval buckling of buried subsea pipelines |
8 |
| A method to predict the cyclic loading profiles (one-way or two-way) for monopile supported offshore wind turbines |
8 |
| Ship collision damage assessment and validation with experiments and numerical simulations |
8 |
| Analytical study of distributed buoyancy sections to control lateral thermal buckling of subsea pipelines |
8 |
| Underwater shaking table tests on bridge pier under combined earthquake and wave-current action |
7 |
| A time-domain method for hydroelasticity of very large floating structures in inhomogeneous sea conditions |
7 |
| Elastic-plastic buckling of deep sea spherical pressure hulls |
7 |
| MARSTRUCT benchmark study on nonlinear FE simulation of an experiment of an indenter impact with a ship side-shell structure |
7 |
| Numerical investigation of wave forces on two side-by-side non-identical boxes in close proximity under wave actions |
7 |
| Effect of proximity of imperfections on buckle interaction in deep subsea pipelines |
7 |
| Review of risk-based design for ice-class ships |
7 |
| Experimental and numerical study on ultimate strength of steel tubular members with pitting corrosion damage |
7 |
| A hypoplastic macroelement model for a caisson foundation in sand under monotonic and cyclic loadings |
7 |
| Modeling, testing and calibration of ductile crack formation in grade DH36 ship plates |
7 |
| Low cycle fatigue test and enhanced lifetime estimation of high-strength steel S550 under different strain ratios |
7 |
| A two-step damage assessment method based on frequency spectrum change in a scaled wind turbine tripod with strain rosettes |
6 |
| A brute-force spectral approach for wave estimation using measured vessel motions |
6 |
| Soil reaction curves for monopiles in clay |
6 |
| Time domain simulation of riser VIV in current and irregular waves |
6 |
| Achieving special mechanical properties with considering dwell time of AA5052 sheets welded by a simple novel friction stir spot welding |
6 |
| Hydrodynamic load modeling and analysis of a floating bridge in homogeneous wave conditions |
6 |
| Reducing hydroelastic responses of pontoon-type VLFS using vertical elastic mooring lines |
6 |
| The effect of low stress triaxialities and deformation paths on ductile fracture simulations of large shell structures |
6 |
| On the damage detection of a laboratory scale model of a tripod supporting structure by vibration-based methods |
6 |
| A semi-analytical frequency domain model for efficient design evaluation of spar floating wind turbines |
6 |
| Chloride diffusion model for concrete in marine environment with considering binding effect |
6 |
| An efficient time-domain prediction model for vortex-induced vibration of flexible risers under unsteady flows |
6 |
| Influence of vertical shear stresses due to pile-soil interaction on lateral dynamic responses for offshore monopiles |
5 |
| Experimental modal analysis of British rock lighthouses |
5 |
| Ice loads on inclined marine structures - Virtual experiments on ice failure process evolution |
5 |
