| Corrosion resistance of chromium-steel and stainless steel reinforcement in concrete |
12 |
| Adsorption and corrosion inhibition properties of pyridine-2-aldehyde-2-quinolylhydrazone for Q235 steel in acid medium: Electrochemical, thermodynamic, and surface studies |
12 |
| Understanding the corrosion behaviour of the magnesium alloys EV31A, WE43B, and ZE41A |
11 |
| A critical examination of corrosion rate measurement techniques applied to reinforcing steel in concrete |
11 |
| Effect of Cu, Cr and Ni alloying elements on mechanical properties and atmospheric corrosion resistance of weathering steels in marine atmospheres of different aggressivities |
10 |
| Corrosion behaviour of 316L stainless steel manufactured by selective laser melting |
9 |
| Dynamic electrochemical impedance study of fluoride conversion coating on AZ31 magnesium alloy to improve bio-adaptability for orthopedic application |
9 |
| Protection of copper by treatment with hot vapors of octadecylamine, 3-benzotriazole, and their mixtures |
9 |
| Chitosan as a green inhibitor for mild steel corrosion: Thermodynamic and electrochemical evaluations |
8 |
| The electrochemical behavior of Mg-9Al-0.5Zn, Mg-9Al-0.7Zn, and Mg-9Al-1.0Zn in a NaCl solution |
7 |
| Accelerated degradation rate of AZ31 magnesium alloy by copper additions |
7 |
| Synergistic effects of corrosion time and stress on corrosion of casing steel in H2S/CO2 gas wells |
7 |
| Tannin of Acacia mearnsii as green corrosion inhibitor for AA7075-T6 alluminum alloy in acidic medium |
7 |
| Synthesis and characterization of pH-responsive mesoporous chitosan microspheres loaded with sodium phytate for smart water-based coatings |
6 |
| Experimental and theoretical studies of the inhibition performance of two furan derivatives on mild steel corrosion in acidic medium |
6 |
| Atmospheric corrosion study in a harbor located in a tropical island |
6 |
| Electrochemical and electrical resistance behavior of cathodic arc PVD TiN, CrN, AlCrN, and AlTiN coatings in simulated proton exchange membrane fuel cell environment |
6 |
| Stress corrosion cracking and corrosion fatigue cracking behavior of A7N01P-T4 aluminum alloy |
6 |
| Structures and corrosion properties of the AlCrFeNiMo0.5Tix high entropy alloys |
6 |
| Qualitative use of potentiodynamic polarization and anodic hydrogen evolution in the assessment of corrosion susceptibility in AA2198-T851 Al-Cu-Li alloy |
6 |
| Comparison of atmospheric corrosion behavior of Al-Mn and Al-Zn-Mg-Cu alloys in a tropical coastal environment |
6 |
| Corrosion and mechanical properties of plasma electrolytic oxidation-coated AZ80 magnesium alloy |
5 |
| Effect of heat treatment on the phase distribution and corrosion resistance of selective laser melting manufactured Inconel 718 superalloy |
5 |
| Corrosion protection performance of nanoparticle incorporated epoxy paint assessed by linear polarization and electrochemical impedance spectroscopy |
5 |
| A new solid-state mode of hot corrosion at temperatures below 700 degrees C |
5 |
| Effect of pressure and impurities on oxidation in supercritical CO2 |
5 |
| Atmospheric corrosion of low carbon steel in a coastal zone of Ecuador: Anomalous behavior of chloride deposition versus distance from the sea |
5 |
| Evaluation of as-extruded ternary Zn-Mg-Zr alloys for biomedical implantation material: In vitro and in vivo behavior |
5 |
| A study on corrosion behaviors of laser cladded Fe-Cr-Ni coating in as-cladded and machined conditions |
5 |
| Effect of the pH of the electrolyte on the formation and on the corrosion properties of ceria based coating on carbon steel |
5 |
| Correlated pitting stages of 304 stainless steel with recurrence quantification analysis of electrochemical noise |
5 |
| Tropical/non-tropical marine environments impact on the behaviour of carbon steel and galvanised steel |
5 |
| Synergistic effect of halide ions and gum arabic for the corrosion inhibition of API5L X70 pipeline steel in H2SO4 |
5 |
| Optimization of the atmospheric corrosivity mapping of Guangdong Province |
4 |
| Quantitative characterization of degradation processes in situ by means of a bioreactor coupled flow chamber under physiological conditions using time-lapse SR mu CT |
4 |
| Corrosion behaviour of Ti-Al-xV-yFe experimental alloys in 3.5wt% NaCl and 3.5M H2SO4 |
4 |
| Pitting corrosion of aluminum alloys in anhydrous ethanol |
4 |
| Atmospheric corrosion of zinc in coastal atmospheres |
4 |
| Effect of graphene on the electrochemical protection of zinc-rich coatings |
4 |
| Atmospheric corrosion patterns of electrogalvanized mild steel at east southern coastal areas of CPEC |
4 |
| Effect of the T6 heat treatment on corrosion behavior of additive manufactured and gravity cast AlSi10Mg alloy |
4 |
| Heteroatoms and pi electrons as favorable factors for efficient corrosion protection |
4 |
| Electrochemical inhomogeneities of steel in steel/copper alloy couple during galvanic corrosion in static and flowing seawater |
4 |
| Advantages of asymmetrical over symmetrical cells for detection of under deposit CO2 corrosion using electrochemical noise |
4 |
| Corrosion behavior of under peak and over-aged 6063 alloy: A comparative study |
4 |
| Effect of NaAlO2 sealing on corrosion resistance of 2024 aluminum alloy anodized film |
4 |
| Effects of the extrusion ratio on the intergranular corrosion behaviour of 6082 aluminium alloy |
4 |
| A comparative study on potentiodynamic and potentiostatic critical pitting temperature of austenitic stainless steels |
4 |
| Effect of machining-induced surface integrity on the corrosion behavior of Al-Li alloy 2A97 in sodium chloride solution |
4 |
| Solid solution treatment on strength and corrosion of biodegradable Mg6Ag wires |
4 |
