| Challenges and opportunities in corrosion of steel in concrete |
35 |
| FTIR spectral analysis of bituminous binders: reproducibility and impact of ageing temperature |
28 |
| Prediction of dynamic modulus of asphalt mixture using micromechanical method with radial distribution functions |
27 |
| Testing superabsorbent polymer (SAP) sorption properties prior to implementation in concrete: results of a RILEM Round-Robin Test |
20 |
| Recommendation of RILEM TC 260-RSC: testing sorption by superabsorbent polymers (SAP) prior to implementation in cement-based materials |
18 |
| Reactivity tests for supplementary cementitious materials: RILEM TC 267-TRM phase 1 |
18 |
| The effect of the steel-concrete interface on chloride-induced corrosion initiation in concrete: a critical review by RILEM TC 262-SCI |
15 |
| Recommendation of RILEM TC 260-RSC: using superabsorbent polymers (SAP) to mitigate autogenous shrinkage |
15 |
| Report of TC 238-SCM: hydration stoppage methods for phase assemblage studies of blended cements-results of a round robin test |
15 |
| Recommendation of RILEM Technical Committee 250-CSM: Test method for Textile Reinforced Mortar to substrate bond characterization |
15 |
| Development of bio-cemented constructional materials through microbial induced calcite precipitation |
14 |
| Performance of Limestone Calcined Clay Cement (LC3) with various kaolinite contents with respect to chloride transport |
13 |
| Evaluation of roughcast on the adhesion mechanisms of mortars on ceramic substrates |
12 |
| RILEM TC-238 SCM recommendation on hydration stoppage by solvent exchange for the study of hydrate assemblages |
10 |
| Bamboo reinforced concrete: a critical review |
10 |
| Effect of capsule addition and healing temperature on the self-healing potential of asphalt mixtures |
10 |
| Towards a more effective and reliable salt crystallization test for porous building materials: state of the art |
10 |
| Effect of ageing on the morphology and creep and recovery of polymer-modified bitumens |
10 |
| Microstructures, thermal and mechanical properties of epoxy asphalt binder modified by SBS containing various styrene-butadiene structures |
9 |
| Curing behavior and mechanical properties of an eco-friendly cold-mixed epoxy asphalt |
9 |
| CFRP confinement in retrofitted RC columns via CSB technique under reversed lateral cyclic loading |
9 |
| Influence of moisture condition on chloride diffusion in partially saturated ordinary Portland cement mortar |
8 |
| Direct shear test for the assessment of rheological parameters of concrete for 3D printing applications |
8 |
| Influence of supplementary cementitious materials on the sustainability parameters of cements and concretes in the Indian context |
8 |
| Eggshell waste to produce building lime: calcium oxide reactivity, industrial, environmental and economic implications |
8 |
| Transitions in unmodified and modified bitumen using FTIR spectroscopy |
8 |
| Influence of encapsulated sunflower oil on the mechanical and self-healing properties of dense-graded asphalt mixtures |
8 |
| Propagation of reinforcement corrosion: principles, testing and modelling |
8 |
| Prediction of autogenous shrinkage in concrete from material composition or strength calibrated by a large database, as update to model B4 |
8 |
| Enhancing the efficiency of electrochemical desalination of stones: a proton pump approach |
7 |
| Penetration of cement pastes into sand packings during 3D printing: analytical and experimental study |
7 |
| Investigating the effect of filler types on thermodynamic parameters and their relationship with moisture sensitivity of asphalt mixes |
6 |
| Experimental study on flexural performance of glued-laminated-timber- bamboo beams |
6 |
| Cavitation of water in hardened cement paste under short-term desorption measurements |
6 |
| Design considerations of high RAP-content asphalt produced at reduced temperatures |
6 |
| Meso-scale modelling of stress effect on chloride diffusion in concrete using three-phase composite sphere model |
6 |
| A microstructural insight into the hygro-mechanical behaviour of a stabilised hypercompacted earth |
6 |
| Novel wedge-shaped bond anchorage system for pultruded CFRP plates |
6 |
| Fatigue and healing performance assessment of asphalt binder from rheological and chemical characteristics |
6 |
| Performance-based criteria to assess the suitability of geopolymer concrete in marine environments using modified ASTM C1202 and ASTM C1556 methods |
6 |
| Mechanical behavior of asphalt mixtures containing silica gels as warm additives |
6 |
| A methodology for quantifying the impact of casting procedure on anisotropy in fiber-reinforced concrete using X-ray CT |
6 |
| Recommendations of RILEM TC 260-RSC for using superabsorbent polymers (SAP) for improving freeze-thaw resistance of cement-based materials |
5 |
| Influence of fly ash blending on hydration and physical behavior of belite-alite-ye'elimite cements |
5 |
| Evaluation of corrosion level of naturally corroded bars using different cleaning methods, computed tomography, and 3D optical scanning |
5 |
| Century-long expansion of hydrating cement counteracting concrete shrinkage due to humidity drop from selfdesiccation or external drying |
5 |
| Structural effects of FRC creep |
5 |
| Influence of service time of recycled coarse aggregate on the mechanical properties of recycled aggregate concrete |
5 |
| Physical and chemical characterization of rejuvenated reclaimed asphalt pavement (RAP) binders using rheology testing and pyrolysis gas chromatography-mass spectrometry |
5 |
| A new test method to determine the gaseous oxygen diffusion coefficient of cement pastes as a function of hydration duration, microstructure, and relative humidity |
5 |
