| Effect of scanning strategies on residual stress and mechanical properties of Selective Laser Melted Ti6Al4V |
64 |
| Microstructure and mechanical properties of Inconel 718 produced by selective laser melting: Sample orientation dependence and effects of post heat treatments |
56 |
| Correlation between process parameters, microstructure and properties of 316 L stainless steel processed by selective laser melting |
53 |
| A novel ZrB2-VB2-ZrC composite fabricated by reactive spark plasma sintering |
42 |
| Transition of twinning behavior in CoCrFeMnNi high entropy alloy with grain refinement |
39 |
| Effect of heat treatment on microstructure, mechanical and corrosion properties of austenitic stainless steel 316L using arc additive manufacturing |
36 |
| Influence of heat treatments on microstructure evolution and mechanical properties of Inconel 625 processed by laser powder bed fusion |
33 |
| Tailoring the microstructure and mechanical properties of AISI 316L austenitic stainless steel via cold rolling and reversion annealing |
31 |
| Effects of initial microstructures on hot tensile fracture characteristics of Ti-6Al-4V alloy |
31 |
| Microstructural characterization and mechanical properties of TiB2 reinforced Al6061 matrix composites produced using stir casting process |
31 |
| Comparison of microstructures and mechanical properties of Inconel 718 alloy processed by selective laser melting and casting |
30 |
| Ultra-high strength WNbMoTaV high-entropy alloys with fine grain structure fabricated by powder metallurgical process |
30 |
| Effects of nano-graphite content on the characteristics of spark plasma sintered ZrB2-SiC composites |
29 |
| Effect of annealing treatment on microstructure evolution and creep behavior of a multiphase Ni3Al-based superalloy |
29 |
| Effect of microstructural refinement and intercritical annealing time on mechanical properties of high-formability dual phase steel |
27 |
| Thermal shock resistance of continuous carbon fiber reinforced ZrC based ultra-high temperature ceramic composites prepared via Zr-Si alloyed melt infiltration |
27 |
| Correlation between arc mode, microstructure, and mechanical properties during wire arc additive manufacturing of 316L stainless steel |
27 |
| Effects of Selective Laser Melting additive manufacturing parameters of Inconel 718 on porosity, microstructure and mechanical properties |
26 |
| Porosity formation mechanisms and fatigue response in Al-Si-Mg alloys made by selective laser melting |
26 |
| Deformation microstructures and strengthening mechanisms for the wire plus arc additively manufactured Al-Mg4.5Mn alloy with inter-layer rolling |
26 |
| Role of melt pool boundary condition in determining the mechanical properties of selective laser melting AlSi10Mg alloy |
25 |
| Strengthening of stainless steel by titanium carbide addition and grain refinement during selective laser melting |
25 |
| Selective laser melting of Ti-35Nb composite from elemental powder mixture: Microstructure, mechanical behavior and corrosion behavior |
25 |
| Wire arc additive manufacturing of Al-6Mg alloy using variable polarity cold metal transfer arc as power source |
25 |
| Evaluation of the mechanical and wear properties of titanium produced by three different additive manufacturing methods for biomedical application |
25 |
| A study of the microstructures and mechanical properties of Ti6A14V fabricated by SLM under vacuum |
24 |
| Deformation behaviors and cyclic strength assessment of AZ31B magnesium alloy based on steady ratcheting effect |
23 |
| Ultra-high strengthening efficiency of graphene nanoplatelets reinforced magnesium matrix composites |
23 |
| Anisotropic mechanical properties of graphene/copper composites with aligned graphene |
23 |
| Effect of Sn content on strain hardening behavior of as-extruded Mg-Sn alloys |
22 |
| Effects of annealing on the microstructure and mechanical properties of selective laser melted AlSi7Mg alloy |
22 |
| Heavy carbon alloyed FCC-structured high entropy alloy with excellent combination of strength and ductility |
22 |
| Effect of heat treatment on microstructure and mechanical properties of 316L steel synthesized by selective laser melting |
22 |
| Effect of temperature rise on microstructural evolution during high-pressure torsion |
22 |
| Effect of morphologies of martensite-austenite constituents on impact toughness in intercritically reheated coarse-grained heat-affected zone of HSLA steel |
22 |
| The evolution of bainite and mechanical properties of direct laser deposition 12CrNi2 alloy steel at different laser power |
22 |
| Microstructure and enhanced strength of laser aided additive manufactured CoCrFeNiMn high entropy alloy |
22 |
| Microstructures and mechanical properties of spray deposited 2195 Al-Cu-Li alloy through thermo-mechanical processing |
21 |
| High-strength beta stabilized Ti-Nb-Fe-Cr alloys with large plasticity |
21 |
| Compression behavior of the graded metallic auxetic reentrant honeycomb: Experiment and finite element analysis |
20 |
| Effect of heat-treatment temperature on microstructures and mechanical properties of Co-Cr-Mo alloys fabricated by selective laser melting |
20 |
| Contribution of Mg2Si precipitates to the strength of direct metal laser sintered AlSi10Mg |
20 |
| Microstructures and mechanical properties of TixNbMoTaW refractory high entropy alloys |
20 |
| Heat treatment effect on the mechanical properties and fracture mechanism in AlSi10Mg fabricated by additive manufacturing selective laser melting process |
20 |
| Electrochemical characterization and stress corrosion cracking of E690 high strength steel in wet-dry cyclic marine environments |
19 |
| Effects of SiC particle size on mechanical properties of SiC particle reinforced aluminum metal matrix composite |
19 |
| Microstructure and mechanical properties of stainless steel 316L vertical struts manufactured by laser powder bed fusion process |
19 |
| Laser weldability of cast and rolled high-entropy alloys for cryogenic applications |
19 |
| Additive manufacturing of functionally graded materials: A review |
19 |
| An approach for fabricating Ni@graphene reinforced nickel matrix composites with enhanced mechanical properties |
19 |
