| Comprehensive beam models for buckling and bending behavior of simple nanobeam based on nonlocal strain gradient theory and surface effects |
21 |
| Fundamental solution of the steady oscillations equations in porous thermoelastic medium with dual-phase-lag model |
19 |
| An implicit formulation of the elasto-plastic self-consistent polycrystal plasticity model and its implementation in implicit finite elements |
18 |
| Effect of functionalized process and CNTs aggregation on fracture mechanism and mechanical properties of polymer nanocomposite |
13 |
| Evaluation of effective properties of piezoelectric hybrid composites containing carbon nanotubes |
12 |
| Thermo-mechanical properties of shape memory polymer nanocomposites reinforced by carbon nanotubes |
12 |
| Stress-state and strain-rate dependent ductile fracture of dual and complex phase steel |
12 |
| On the indentation of elastoplastic functionally graded materials |
11 |
| Mechanistic insight into the role of severe plastic deformation and post-deformation annealing in fracture behavior of Al-Mn-Si alloy |
11 |
| Modeling ignition prediction of HMX-based polymer bonded explosives under low velocity impact |
11 |
| Thermomechanical constitutive modeling of fiber reinforced shape memory polymer composites based on thermodynamics with internal state variables |
11 |
| Static and dynamic response of graphene nanocomposite plates with flexoelectric effect |
11 |
| Effects of adding CNTs on the thermo-mechanical characteristics of hybrid titanium nanocomposites |
11 |
| Experimental and computational issues for automated extraction of plasticity parameters from spherical indentation |
10 |
| Constitutive model for metals with dynamic strain aging |
10 |
| Simulation of anisotropic load transfer and stress distribution in sicp/Al composites subjected to tensile loading |
10 |
| A 3D crystal plasticity model of monotonic and cyclic simple shear deformation for commercial-purity polycrystalline Ti with a harmonic structure |
10 |
| A mechanism-based spatiotemporal non-local constitutive formulation for elastodynamics of composites |
10 |
| The interface behavior of a thin piezoelectric film bonded to a graded substrate |
9 |
| Heterogeneity in deformation of granite under dynamic combined compression/shear loading |
9 |
| Diode behavior and nonreciprocal transmission in nonlinear elastic wave metamaterial |
9 |
| Improved design of fused deposition modeling equipment for 3D printing of high-performance PEEK parts |
9 |
| Simulation of the flow behavior of AZ91 magnesium alloys at high deformation temperatures using a piecewise function of constitutive equations |
8 |
| A thermoviscoelastic model incorporated with uncoupled structural and stress relaxation mechanisms for amorphous shape memory polymers |
8 |
| Strength failure criteria analysis for a flax fibre reinforced composite |
8 |
| Crushing and densification of rapid prototyping polylactide foam: Meso-structural effect and a statistical constitutive model |
8 |
| Residual stresses in functionally graded thermal barrier coatings |
8 |
| Curvature changes and weight loss of polymeric nano-composite plates with consideration of the thermal cycle fatigue effects and different resin types: An experimental approach |
8 |
| Hot deformation behavior of Mg-8Li-3Al-2Zn-0.2Zr alloy based on constitutive analysis, dynamic recrystallization kinetics, and processing map |
8 |
| A novel approach for the prediction of deformation and fracture in hard coatings: Comparison of numerical modeling and nanoindentation tests |
8 |
| Analysis of the hybrid composite materials reinforced with natural fibers considering digital image correlation (DIC) measurements |
8 |
| On a general numerical scheme for the fractional plastic flow rule |
8 |
| Stress concentration around an elliptical hole with surface tension based on the original Gurtin-Murdoch model |
8 |
| Effective electrical conductivity of transversely isotropic rocks with arbitrarily oriented ellipsoidal inclusions |
8 |
| Comparison between the Mori-Tanaka and generalized self-consistent methods in the framework of anti-plane strain inclusion problem in strain gradient elasticity |
8 |
| Electro-magnetostriction under large deformation : Modeling with experimental validation |
8 |
| Modeling thermal recovery of the Mullins effect |
7 |
| Effects of Al2OCuO and TiO2 nanoparticles son thermal, phase transition and crystallization properties of solid-solid phase change material |
7 |
| Inherent negative refraction on acoustic branch of two dimensional phononic crystals |
7 |
| Constitutive model of salt concentration-sensitive hydrogel |
7 |
| High temperature damping behavior and dynamic Young's modulus of magnesium matrix composite reinforced by Ti2AlC MAX phase particles |
7 |
| High-strain-rate plastic deformation and fracture behaviour of Ti-5Al-5Mo-5V-1Cr-1Fe titanium alloy at room temperature |
7 |
| Stability analysis of the phase-field method for fracture with a general degradation function and plasticity induced crack generation |
7 |
| Modeling and experimental verification of nonlinear behavior of cellulose nanocrystals reinforced poly(lactic acid) composites |
7 |
| Cooperative-VBO model for polymer/graphene nanocomposites |
6 |
| A-micromechanical model for the grain size dependent super-elasticity degeneration of NiTi shape memory alloys |
6 |
| Finite element modelling effects of inter-yarn friction on the single-layer high-performance fabrics subject to ballistic impact |
6 |
| Fractional viscoelastic models with non-singular kernels |
6 |
| Effect of anisotropy on the mechanical properties of polyurethane foams: An experimental and numerical study |
6 |
| Surface Stress Effect on Silicon Nanowire Mechanical Behavior: Size and Orientation Dependence |
6 |
