| An Integrated Study on the Evolution of Inclusions in EH36 Shipbuilding Steel with Mg Addition: From Casting to Welding |
21 |
| Additive Manufacturing of a Steel-Ceramic Multi-Material by Selective Laser Melting |
15 |
| A Phase-Field Lattice-Boltzmann Study on Dendritic Growth of Al-Cu Alloy Under Convection |
13 |
| Novel Cooling Rate Correlations in Molten Metal Gas Atomization |
11 |
| A Review of Physical and Numerical Approaches for the Study of Gas Stirring in Ladle Metallurgy |
11 |
| Efficient Separation and Extraction of Vanadium and Chromium in High Chromium Vanadium Slag by Selective Two-Stage Roasting-Leaching |
11 |
| Experimental Investigation of Gas/Slag/Matte/Tridymite Equilibria in the Cu-Fe-O-S-Si System in Controlled Gas Atmosphere: Experimental Results at 1523 K (1250 A degrees C) and P(SO2)=0.25 atm |
10 |
| Dendritic Growth Under Natural and Forced Convection in Al-Cu Alloys: From Equiaxed to Columnar Dendrites and from 2D to 3D Phase-Field Simulations |
10 |
| Transient Evolution of Nonmetallic Inclusions During Calcium Treatment of Molten Steel |
10 |
| Viscosity of TiO2-FeO-Ti2O3-SiO2-MgO-CaO-Al2O3 for High-Titania Slag Smelting Process |
10 |
| A Comprehensive Analysis of Macrosegregation Formation During Twin-Roll Casting |
10 |
| Effect of Nozzle Port Angle on Transient Flow and Surface Slag Behavior During Continuous Steel-Slab Casting |
10 |
| Understanding the Relationship Between Structure and Thermophysical Properties of CaO-SiO2-MgO-Al2O3 Molten Slags |
9 |
| In Situ Observation of Calcium Aluminate Inclusions Dissolution into Steelmaking Slag |
8 |
| Effect of Weld Consumable Conditioning on the Diffusible Hydrogen and Subsequent Residual Stress and Flexural Strength of Multipass Welded P91 Steels |
8 |
| Rapid Identification of Calcium Aluminate Inclusions in Steels Using Cathodoluminescence Analysis |
8 |
| Electrochemical Deoxidation of Titanium in Molten MgCl2-YCl3 |
8 |
| Effect of Li2O on the Behavior of Melting, Crystallization, and Structure for CaO-Al2O3-Based Mold Fluxes |
8 |
| Transformation of Inclusions in Linepipe Steels During Heat Treatment |
8 |
| Effect of Ladle Changeover Condition on Transient Three-Phase Flow in a Five-Strand Bloom Casting Tundish |
8 |
| In Situ Observation of the Precipitation, Aggregation, and Dissolution Behaviors of TiN Inclusion on the Surface of Liquid GCr15 Bearing Steel |
8 |
| In Situ Observation of the Nucleation and Growth of Ferrite Laths in the Heat-Affected Zone of EH36-Mg Shipbuilding Steel Subjected to Different Heat Inputs |
8 |
| Deoxidation of Titanium Using Mg as Deoxidant in MgCl2-YCl3 Flux |
8 |
| Tuning Weld Metal Mechanical Responses via Welding Flux Optimization of TiO2 Content: Application into EH36 Shipbuilding Steel |
8 |
| Synergistic Effect of Nitrogen and Refractory Material on TiN Formation and Equiaxed Grain Structure of Ferritic Stainless Steel |
7 |
| Controlled Solidification of Liquids Within the SFC Primary Phase Field of the Fe2O3-CaO-SiO2 System in Air |
7 |
| Molecular Dynamics Simulation on the Effect of MgO/Al2O3 Ratio on Structure and Properties of Blast Furnace Slag Under Different Basicity Conditions |
7 |
| Experimental Liquidus Study of the Ternary CaO-ZnO-SiO2 System |
7 |
| Interfacial Microstructural Evolution and Metallurgical Bonding Mechanisms for IN718 Superalloy Joint Produced by Hot Compressive Bonding |
7 |
| Thermodynamic Considerations of Direct Oxygen Removal from Titanium by Utilizing the Deoxidation Capability of Rare Earth Metals |
7 |
| Effect of Deoxidation Process on Inclusion and Fatigue Performance of Spring Steel for Automobile Suspension |
7 |
| Three-Dimensional Mathematical Model of Oxygen Transport Behavior in Electroslag Remelting Process |
7 |
| Distribution of Ni, Co, Precious, and Platinum Group Metals in Copper Making Process |
7 |
| Study on the Fluid Flow Characteristics of Coherent Jets with CO2 and O-2 Mixed Injection in Electric Arc Furnace Steelmaking Processes |
7 |
| Evolution of Oxide Inclusions in Si-Mn-Killed Steel During Protective Atmosphere Electroslag Remelting |
7 |
| Novel Approach to Studying Influences of Na2O and K2O Additions on Viscosity and Thermodynamic Properties of BF Slags |
7 |
| Fluid Flow, Dissolution, and Mixing Phenomena in Argon-Stirred Steel Ladles |
7 |
| Kinetics of Reduction of Low-Grade Nickel Laterite Ore Using Carbon Monoxide |
7 |
| Effect of Cooling Rate on Microsegregation During Solidification of Superalloy INCONEL 718 Under Slow-Cooled Conditions |
7 |
| Formation Mechanism of Oxide-Sulfide Complex Inclusions in High-Sulfur-Containing Steel Melts |
7 |
| Effects of the Cr2O3 Content on the Viscosity of CaO-SiO2-10 Pct Al2O3-Cr2O3 Quaternary Slag |
7 |
| Reduction of CaO and MgO Slag Components by Al in Liquid Fe |
6 |
| Experimental Investigation of Gas/Slag/Matte/Spinel Equilibria in the Cu-Fe-O-S-Si System at 1473 K (1200 A degrees C) and P(SO2)=0.25 atm |
6 |
| Formation of Titanium Sulfide from Titanium Oxycarbonitride by CS2 Gas |
6 |
| The Effect of CaO on Gas/Slag/Matte/Tridymite Equilibria in Fayalite-Based Copper Smelting Slags at 1473 K (1200 A degrees C) and P(SO2)=0.25 Atm |
6 |
| Precipitation Behaviors of TiN Inclusion in GCr15 Bearing Steel Billet |
6 |
| Characterization of Inclusions in 3rd Generation Advanced High-Strength Steels |
6 |
| Deformability of Oxide Inclusions in Tire Cord Steels |
6 |
| Dissolution Behavior of Mg from Magnesia-Chromite Refractory into Al-killed Molten Steel |
6 |
| Synthesis of Titanium Oxycarbide from Titanium Slag by Methane-Containing Gas |
6 |
