| Microstructure and mechanical properties of friction stir welded and laser welded high entropy alloy CrMnFeCoNi |
22 |
| Important Factors on the Failure of Pipeline Steels with Focus on Hydrogen Induced Cracks and Improvement of Their Resistance: Review Paper |
18 |
| Plastic Deformation Behavior of 40Fe-25Ni-15Cr-10Co-10V High-Entropy Alloy for Cryogenic Applications |
14 |
| Liquid Metal Embrittlement of Resistance Spot Welded 1180 TRIP Steel: Effect of Electrode Force on Cracking Behavior |
13 |
| Reviews on factors affecting fatigue behavior of high-Mn steels |
13 |
| Microstructure and Properties of Novel Heat Resistant Al-Ce-Cu Alloy for Additive Manufacturing |
12 |
| Efficiency Analysis of Shot Peening Parameters on Variations of Hardness, Grain Size and Residual Stress via Taguchi Approach |
10 |
| Effect of Strontium and Magnesium Additions on the Microstructure and Mechanical Properties of Al-12Si Alloys |
10 |
| Microstructure and Mechanical Properties of Al-Co-Cr-Fe-Ni Base High Entropy Alloys Obtained Using Powder Metallurgy |
10 |
| Interfacial Microstructural and Corrosion Characterizations of Friction Stir Welded AA6061-T6 and AISI304 Materials |
9 |
| Effect of Main Parameters on the Mechanical and Wear Behaviour of Functionally Graded Materials by Centrifugal Casting: A Review |
9 |
| Back-Stress Effect on the Mechanical Strength of TWIP-IF Steels Layered Sheet |
9 |
| Tensile Properties and Serrated Flow Behavior of As-Cast CoCrFeMnNi High-Entropy Alloy at Room and Elevated Temperatures |
9 |
| Effect of Intercritical Annealing Conditions on Grain Growth Kinetics of Dual Phase Steel |
8 |
| Contributions of Rare Earth Element (La,Ce) Addition to the Impact Toughness of Low Carbon Cast Niobium Microalloyed Steels |
8 |
| Effect of Prestrain on Hydrogen Embrittlement Susceptibility of EH 36 Steels Using In Situ Slow-Strain-Rate Testing |
8 |
| Comparison Between Vanadium and Niobium Effects on the Mechanical Properties of Intercritically Heat Treated Microalloyed Cast Steels |
8 |
| Effects of Ta Content on Thermodynamic Properties and Transformation Temperatures of Shape Memory NiTi Alloy |
8 |
| Corrosion and Wear Characteristics of Electroless Ni-P, Ni-P-W and Composite Ni-P-W/Al2O3 Coatings on AZ91 Sheet |
8 |
| Microstructure and Tensile/Corrosion Properties Relationships of Directionally Solidified Al-Cu-Ni Alloys |
7 |
| Microstructure and Physical-Mechanical Properties of (TiAlSiY)N Nanostructured Coatings Under Different Energy Conditions |
7 |
| Effect of Aging Isothermal Time on the Microstructure and Room-Temperature Impact Toughness of Fe-24.8Mn-7.3Al-1.2C Austenitic Steel with kappa-Carbides Precipitation |
7 |
| Hot Deformation Behavior and Dynamic Recrystallization Characteristics of 12Cr Ultra-Super-Critical Rotor Steel |
7 |
| 3D Printed Parts with Honeycomb Internal Pattern by Fused Deposition Modelling; Experimental Characterization and Production Optimization |
7 |
| Electrochemical and Spectroscopic Study on the Corrosion of Ti-5Al and Ti-5Al-5Cu in Chloride Solutions |
7 |
| Failure Analysis of a Water Wall Boiler Tube for Power Generation in a District Heating System |
7 |
| Characterization of Hot Deformation Behavior and Processing Maps of Ti-19Al-22Mo Alloy |
7 |
| Discontinuous precipitation at the deformation band in copper alloy |
7 |
| High-Strength AZ91 Alloy Fabricated by Rapidly Solidified Flaky Powder Metallurgy and Hot Extrusion |
7 |
| Effects of Strain Rate on Compressive Properties in Bimodal 7075 Al-SiCp Composite |
7 |
| Effect of Heat Treatments on Microstructures and Tensile Properties of Cu-3 wt%Ag-0.5 wt%Zr Alloy |
7 |
| Metadynamic and static recrystallization softening behavior of a bainite steel |
6 |
| Microstructures and Mechanical Properties of Multiphase-Reinforced In Situ Aluminum Matrix Composites |
6 |
| Electroless Cu/Ni Plating on Graphite Flake and the Effects to the Properties of Graphite Flake/Si/Al Hybrid Composites |
6 |
| Formation of Secondary Phases and Their Effect on the Mechanical Properties of Joints Formed by TLP Bonding Using Fe-B-Si Insert Metal in Duplex Stainless Steel |
6 |
| Effects of Addition of Si and Sb on the Microstructure and Thermoelectric Properties of GeTe |
6 |
| Microstructure and crystallographic texture of pure titanium parts generated by laser additive manufacturing |
6 |
| Effect of Mn and C on Age Hardening of Fe-Mn-Al-C Lightweight Steels |
6 |
| Microstructure and Mechanical Properties of Laser Welded Joints of DZ125L and IN718 Nickel Base Superalloys |
6 |
| Characterization and Property Evaluation of Ti-Based Target Materials and Their Nitride Nano-composites Coating Layers |
6 |
| Relationships Between Stretch-Flangeability and Microstructure-Mechanical Properties in Ultra-High-Strength Dual-Phase Steels |
6 |
| Microstructure, Tensile and Fatigue Properties of Al-5 wt.%Mg Alloy Manufactured by Twin Roll Strip Casting |
6 |
| Effect of Precipitate State on Mechanical Properties, Corrosion Behavior, and Microstructures of Al-Zn-Mg-Cu Alloy |
6 |
| Microstructural Degradation and Creep Fracture Behavior of Conventionally and Thermomechanically Treated 9% Chromium Heat Resistant Steel |
6 |
| Effect of Aging on the Corrosion Resistance of 2209 Duplex Stainless Steel Weldments |
5 |
| Microstructure-Strengthening Interrelationship of an Ultrasonically Treated Hypereutectic Al-Si (A390) Alloy |
5 |
| Tailoring Mechanical Properties of a Low Carbon Cu-Containing Structural Steel by Two-Step Intercritical Heat Treatment |
5 |
| Effects of Ni and Cr on Cryogenic Impact Toughness of Bainite/Martensite Multiphase Steels |
5 |
| Evaluation of the Microstructural Aspects, Mechanical Properties and Dry Sliding Wear Response of MoTaNbVTi Refractory High Entropy Alloy |
5 |
| Hollow Twist Extrusion: Introduction, Strain Distribution, and Process Parameters Investigation |
5 |
