| Activated carbons prepared by the KOH activation of a hydrochar from garlic peel and their CO2 adsorption performance |
19 |
| Carbon-supported metal single atom catalysts |
18 |
| Synthesis of porous carbons from coal tar pitch for high-performance supercapacitors |
10 |
| Synthesis and electrochemical performance of flexible cellulose nanofiber-carbon nanotube/natural rubber composite elastomers as supercapacitor electrodes |
9 |
| Hydrolysis and carbonization mechanism of cotton fibers in subcritical water |
7 |
| Large-surface-area carbons derived from lotus stem waste for efficient CO2 capture |
7 |
| Preparation of a biochar with a high calorific value from chestnut shells |
7 |
| Effects of the ultrasound-assisted H-3 PO4 impregnation of sawdust on the properties of activated carbons produced from it |
6 |
| Synthesis and properties of a silane and copolymer-modified graphene oxide for use as a water-reducing agent in cement pastes |
6 |
| Synthesis of a biocompatible nanoporous carbon and its conjugation with florescent dye for cellular imaging and targeted drug delivery to cancer cells |
6 |
| Effect of the graphene content on the microstructures and properties of graphene/aluminum composites |
6 |
| Preparation and antibacterial activities of copper nanoparticles encapsulated by carbon |
5 |
| Stabilizing graphene layers by intercalating laponite between them |
5 |
| A molecularly-imprinted polymer decorated on graphene oxide for the selective recognition of quercetin |
5 |
| Rapid and green synthesis of fluorescent carbon dots from starch for white light-emitting diodes |
5 |
| Synthesis of porous graphene-like carbon materials for high-performance supercapacitors from petroleum pitch using nano-CaCO3 as a template |
5 |
| A two-step method for the preparation of high performance corncob-based activated carbons as supercapacitor electrodes using ammonium chloride as a pore forming additive |
4 |
| Synthesis and photoluminescence of graphdiyne |
4 |
| Preparation of an activated carbon from hazelnut shells and its hybrids with magnetic NiFe2O4 nanoparticles |
4 |
| Almost total desulfurization of high-sulfur petroleum coke by Na2CO3-promoted calcination combined with ultrasonic-assisted chemical oxidation |
4 |
| Preparation of nitrogen-doped carbon dots with a high fluorescence quantum yield for the highly sensitive detection of Cu2+ ions, drawing anti-counterfeit patterns and imaging live cells |
4 |
| Nanohybrids of silver nanoparticles grown in-situ on a graphene oxide silver ion salt: simple synthesis and their enhanced antibacterial activity |
3 |
| Effects of the oxygen content of reduced graphene oxide on the mechanical and electromagnetic interference shielding properties of carbon fiber/reduced graphene oxide-epoxy composites |
3 |
| Efficient removal of organic dyes using a three-dimensional graphene aerogel with excellent recycling stability |
3 |
| Effect of the CO2 activation parameters on the pore structure of silicon carbide-derived carbons |
3 |
| Preparation and characterization of high softening point and homogeneous isotropic pitches produced from distilled ethylene tar by a novel bromination method |
3 |
| Sulfidation of iron confined in nitrogen-doped carbon nanotubes to prepare novel anode materials for lithium ion batteries |
3 |
| Co-carbonization of brominated petroleum pitch, coal tar pitch and benzoyl chloride to prepare cokes |
3 |
| Research progress of the application of graphene-based materials in the treatment of water pollutants |
3 |
| Nd-doped TiO2-C hybrid aerogels and their photocatalytic properties |
3 |
| Fabrication of magnetic activated carbons from corn cobs using the pickle liquor from the surface treatment of iron and steel |
3 |
| Piezoresistive response of carbon nanotube yarns under tension: Parametric effects and phenomenology |
3 |
| Phase change materials coated with modified graphene-oxide as fillers for silicone rubber used in thermal interface applications |
3 |
| Improved corrosion resistance of copper coated by graphene |
3 |
| The effects of graphene content on the corrosion resistance , and electrical , thermal and mechanical properties of graphene/copper composites |
3 |
| Carbon materials in a high temperature gas-cooled reactor pebble-bed module |
2 |
| Improved decontamination performance of biofilm systems using carbon fibers as carriers for microorganisms |
2 |
| Graphene-based in-plane heterostructures for atomically thin electronics |
2 |
| A first-principles study of lithium and sodium storage in two-dimensional graphitic carbon nitride |
2 |
| Reduced graphene oxide hydrogels prepared in the presence of phenol for high-performance electrochemical capacitors |
2 |
| Effect of the oxygen content and the functionality of spinnable pitches derived from ethylene tar by distillation on the mechanical properties of carbon fibers |
2 |
| The evolution of microstructure and thermal conductivity of mesophase pitch-based carbon fibers with heat treatment temperature |
2 |
| Modification of a rice husk-based activated carbon by thermal treatment and its effect on its electrochemical performance as a supercapacitor electrode |
2 |
| The cytotoxicity of water-soluble carbon nanotubes on human embryonic kidney and liver cancer cells |
2 |
| Specific heat capacities and flow resistance of an activated carbon with adsorbed helium as a regenerator material in refrigerators |
1 |
| The thermal and mechanical properties of carbon fiber/flake graphite/cyanate ester composites |
1 |
| Temperature-variable Raman scattering study on micromechanical properties of the carbon fiber reinforced polyimide composite film |
1 |
| Effect of gelation time on the microstructures, mechanical properties and cyclization reactions of dry-jet gel-spun polyacrylonitrile fibers |
1 |
| A flexible carbon nanotube-pyrolytic carbon sandwich paper with a stable structure and high heat-dissipation capacity |
1 |
| The effect of the oxidation method of an activated carbon on the selective catalytic reduction of NOx with NH3 over CeO2/activated carbon catalysts |
1 |
