| Theory of the double-tuned side-inlet side-outlet muffler |
3 |
| Numerically stable explicit time-domain finite element method for room acoustics simulation using an equivalent impedance model |
3 |
| Optimization of geometric parameters of the standardized multilayer microperforated panel with finite dimension |
3 |
| Low-frequency impact sound pressure fields in small rooms within lightweight timber buildings - suggestions for simplified measurement procedures |
3 |
| Active control for vehicle interior noise using the improved iterative variable step-size and variable tap-length LMS algorithms |
2 |
| The influence analysis of curvature on transverse vibration of multi-curved shafting based on numerical and experimental results |
2 |
| Structural equation models of road traffic and aircraft noise annoyance in Vietnam |
2 |
| Experimental investigation of the effect of roundabouts on noise emission level from motor vehicles |
1 |
| The reduction of quadcopter propeller noise |
1 |
| Vibration of and radiated acoustic power from a simply-supported panel excited by a turbulent boundary layer excitation at low Mach number |
1 |
| Analysis of acoustic characteristics of the expansion chamber water muffler considering acoustic-structure interaction |
1 |
| Variations in sound insulation from 20 Hz in lightweight dwellings |
1 |
| CFD analysis of flow noise at tees at natural gas station |
1 |
| Axial flow fan performance improvement via leading-edge reshaping |
1 |
| The potential use of a NIOSH sound level meter smart device application in mining operations |
1 |
| Alternative method to the Oberst technique to measure the complex elastic modulus of viscoelastic materials |
1 |
| Dynamic modeling of a galloping structure equipped with piezoelectric wafers and energy harvesting |
1 |
| Acoustic performance analysis of Helmholtz resonators with conical necks and its application |
1 |
| Comparisons of regularization methods and regularization parameter selection methods in sound source identification using inverse boundary element method |
1 |
| Vibration analysis of a deployable structure using Constant-Q nonstationary Gabor transform and Fourier transform |
1 |
| Rapid engineering assessment method for acoustic design of metro trains |
1 |
| Sound intensity transfer path analysis and its application to analyze the acoustics in vehicle interior |
1 |
| Evaluating noise exposure levels of laboratories in civil engineering education |
1 |
| Case study: Establishment of a vehicle noise emission model for gradient roads |
1 |
| Thin multi-tone sound absorbers based on analog circuit shunt loudspeakers |
1 |
| The identification of minimum-weight sound packages |
1 |
| Experimental methods to reduce noise generated by haul trucks and LHDs |
1 |
| Reduction and optimization of a vehicle's rear side window buffeting |
1 |
| Study on vibration and noise characteristics of rounded-jointed silent chain system |
1 |
| On development of rational design guidelines for large side-inlet side-outlet perforated element mufflers |
1 |
| Determination of effective parameters for diagnosis and classification of air-conditioning refrigerant noise by logistic regression |
0 |
| Fluctuating traffic noise levels calculated from time-dependent traffic data: an engineering approach |
0 |
| Numerical investigation of external radiation noise induced by dipole and quadrupole sources in an axial piston pump |
0 |
| Prediction of sound absorption property of metal rubber using general regression neural network |
0 |
| Reducing tonal sound from a cascade of flat plates by varying the thickness ratio of neighboring plates |
0 |
| Experimental studies on acoustics of corrugated tubes |
0 |
| Wavelet analysis of flame blowout of a liquid-fueled swirl burner with quarls |
0 |
| Active control of compressor noise in the machinery room of refrigerators |
0 |
| Case study: Measurement and treatment of severe flutter echo caused by a barrel-vaulted sanctuary ceiling |
0 |
| Case study: Sonic effect of product setup on perceived quality: an approach to home appliance design |
0 |
| Psychoacoustic active noise control system based on empirical mode decomposition |
0 |
| Noise reduction of a tractor exhaust tailpipe with bionic convex textures |
0 |
| Comparative study on non-traditional torsional vibration isolators for automotive clutch dampers |
0 |
| Noise suppression method by jointly using bone- and air-conducted speech signals |
0 |
| Influence of weather on the acoustical properties of a ground surface: measurements and models |
0 |
| Case study: An improvement study of damping ring applied to wheel noise and vibration control |
0 |
| Case study: An experimental noise reduction study of an extended flow range automotive turbocharger centrifugal compressor |
0 |
| Development of a wireless measurement system for ship vibration in a sea trial |
0 |
| Acoustics vs. psychoacoustics: An objective and subjective analysis of classroom acoustics in Singapore |
0 |
| Proposal of a simplified method for the prediction of impact sound insulation between rooms, from below to above |
0 |
